Choosing the right blade for your circular saw is crucial if you want your circular saw to operate at peak efficiency. I will tell you about the different kinds of circular saw blades and what kind of blade is best for each job. Inexpensive: The circular saw blades are cheap compared to table saw blades.
Not only will you need a different blade for cutting metal than you would for cutting wood, but a metal-cutting blade should not be used in the same saw as the type used for wood. If you do decide to use a wood saw on metal, only use a 7 1/4-inch blade and preferably a worm drive blade, which provides extra torque. As always when purchasing a blade for your circular saw, make sure it has the right diameter and arbor size to match your saw.
circular saw blades for wood and metal Related Question:
Can you put a wood blade on a metal circular saw?
While a metal-cutting saw has a collection bin to prevent metal chips from getting into the machine, a woodcutting saw isn’t designed this way. If you do decide to use a wood saw on metal, only use a 7 1/4-inch blade and preferably a worm drive blade, which provides extra torque.
What is the difference between wood and metal saw blades?
Metal Cutting Blades have more teeth per inch for cutting harder, denser materials. They are typically 10 to 18 TPI, but can go as high as 24 TPI. They are also used for finish cuts in wood because they leave a smooth edge.
Can I use a steel blade to cut wood?
A blade meant for metal will cut wood, but it will do it slowly and the blade will get hot. When the blade overheats it will scorch the wood and it will cause the teeth to lose temper, essentially destroying the blade.
What kind of blade can cut through wood and nails?
Diablo’s new 7-1/4” Wood & Metal saw blade is the industry’s first multi-purpose saw blade for cutting clean wood and wood with nails, up to 2-1/4” material thickness; and metal ranging from 3/32”-1/4” wall thickness and 1/4”-1” diameter.
Can I use circular saw on metal?
Cut Metal with Your Circular Saw It may not be an obvious choice, but fitted with the right blade, a circular saw is a great metal-cutting tool. In our test, it cut through rebar like a hot knife through butter. You can cut mild steel up to about 3/8 in. thick using a ferrous-metal-cutting blade.
Can you turn a circular saw blade backwards to cut metal?
You can run a saw blade backwards and it cuts pretty well. However it is not at all a good idea. The two big reasons not to do this is that saw tips are much more likely to come off if the saw blade is run backwards and that the whole saw blade is much more likely to come apart if it is run backwards.
What is the best TPI for cutting wood?
If you’re looking to cut wood or other soft materials, you’ll need a blade with a TPI of 6 up to 20. For harder materials like metal, a TPI between 14 up to 36 is more suitable. The number of teeth can be found on the blade.
What does TCT mean on saw blades?
Tungsten Carbide Tips. TCT saw blades are specifically designed for cutting metal tubing, pipes, rails, nickel, zirconium, cobalt and titanium-based metal. All of this is possible thanks to the teeth on the saw blades, and the tungsten carbide tips, or TCT.
Can a carbide blade cut wood?
It is never wrong to use a Carbide Tipped saw blade for cutting wood. Carbide tipped saw blades cut almost everything from asbestos to Zirconium, including paper, plastics, rubber, steel, insulation, aluminum, and even food, as well as every kind of wood in the world and all the wood composites.
Can I use metal saw on wood?
A metal cutting bandsaw is typically built more solidly than a saw designed for cutting wood, so there are no issues with the machine itself. As for the blade, the wood fibers could clog the metal blade’s teeth more quickly, and the blade will probably cut through the wood more slowly.
Can I use a metal cutting disc on wood?
Can I Use a Metal Cutting Disc on Wood? The short and stupid answer is, yes. But, it’s not ideal and most pros would very much advise against using a metal cutting disc to cut wood.
Can you use diamond blade to cut wood?
According to DIY blog Hunker.com, diamond blades aren’t the best choice for cutting wood. As stated earlier, these saws are manufactured to handle the toughest materials, and wood isn’t one of those. Wood, especially boards, have soft fibers which can easily be damaged when the cut is not done correctly.
Can carbide blade cut nails?
Even though a carbide blade will cut nails, I won’t do it for safety reasons.
What saw cuts through nails?
A Reciprocating Saw is a handheld saw commonly used for demolition and remodeling. You can use it to cut through many types of materials such as wood, metal, PVC and nails.
Can I put a metal cutting blade on my miter saw?
Although mitre saws were traditionally used for cutting wood, with the correct blade they can make light work of cutting through steel and aluminium profiles at an angle.
