Cut through a wide range of materials with a circular saw blade. Circular saw blades are commonly used to cut hardwood and softwood but can also cut laminated panels, aluminium and other non-ferrous metals used in pipes and rails. At Toolstation, you’ll find a selection of high-quality saw blades and circular saw blades for wood.
Toolstation stocks saw blades with 16 to 100 tungsten carbide teeth, including 165mm circular saw blades. Circular saw blades are commonly used to cut hardwood and softwood but can also cut laminated panels, aluminium and other non-ferrous metals used in pipes and rails. At Toolstation, you’ll find a selection of high-quality saw blades and circular saw blades for wood.
Toolpak’s TCT circular saw blades cut natural wood and composite materials. Their precision-brazed carbide tips ensure you’ll get a clean and fast cut, while the reamed bore makes sure that the blades will fit your machine easily and accurately. The 210 mm blades are manufactured to meet BS EN 847-1:2013 requirements for milling tools and circular saw blades.
circular saw blades for wood toolstation Related Question:
What type of blade is best for cutting wood?
For most construction work, a 24-tooth general use blade is sufficient. That blade is very aggressive and will help you rip and cross-cut lumber and sheet goods quickly and with a high degree of accuracy. With a 24-tooth demo blade, you’re getting work done quickly, but you won’t get a near-finished edge.
What are the different types of circular saw blades?
Blade Types: Generally speaking there are four major categories of circular saw blades. They are: Rip Blades, Crosscut, Combination and Specialty blades. Ripping saw blades are designed primarily to achieve a smooth, clean and safe cut when ripping wood or cutting in the same direction as the wood grain.
What type of blade is best for circular saw?
Mostly, a 24-tooth circular saw blade is preferred by many people, especially if you have to cross-cut lumber and sheet materials. The 24-tooth blade is good enough for you if the diameter is 7¼”. However, as the diameter increases, you should also consider looking for circular saw blades with more teeth.
Is a circular saw good for cutting wood?
A circular saw is a utilitarian workhorse and a useful addition to the toolkit of DIYers. Its most common function is to make cuts in a straight line on pieces of lumber.
Is more teeth on a saw blade better?
Blades with more teeth yield a smoother cut. Blades with fewer teeth remove material faster, but tend to produce a rougher cut with more “tearout”. More teeth means you will need to use a slower feed rate.
Can I use a bigger blade on my circular saw?
The answer is generally this is not a great idea. A larger blade will put excess stress on the motor, and may not have enough strength to provide the cutting power at the tooth you need.
What is the most common circular saw blade size?
Circular Saw Features Blade capacity determines the maximum depth of cut a saw can achieve. The larger the blade, the deeper the cut. The most common blade diameter is 7-1/4 inches. Most saws with blade capacities of 6 inches or more can cut through 2-inch dimensional lumber at a 45-degree angle in a single pass.
Can I use any circular saw blade?
What is this? Not every circular saw is adequate for each material, which means that the blades are made according to whether you need them to cut wood, metal or concrete. Along with that, it is a fact that a single circular saw may need different special blades that aren’t universal or interchangeable.
How many teeth do I need on my circular saw blade?
A 40-tooth blade works fine for most cuts through plywood. Blades with 60 or 80 teeth should be used on veneered plywood and melamine, where the thin veneers are likely to blow out on the underside of the cut, a characteristic known as tearout. MDF requires even more teeth (90 to 120) to get the cleanest cut.
Do all circular saw blades Universal?
Circular saw blades are designed for use with miter saws, table saws, radial arm saws, cut-off saws and standard circular saws. Many circular blades can be used interchangeably between devices.
Which saw blades make the smoothest cut?
With fewer spaces between the teeth, crosscut blades remove less material, resulting in a smoother cut. It also means it takes these blades longer to move through wood. Crosscut blades are the go-to choice for finish carpentry and other applications that require precision and a smooth finish.
When should I replace my circular saw blade?
Look for worn-down, chipped, broken and missing teeth or chipped carbide tips that indicate it’s time to replace a circular saw blade. Check the wear line of carbide edges using a bright light and magnifying glass to determine if it’s beginning to dull.
Why won’t my circular saw cut all the way through?
Here are some reasons your circular saw keeps stopping: Make sure your work piece is properly supported so it doesn’t pinch the blade which could also cause kickback in addition to stopping. Damaged, warped, loose or dull blade. Motor malfunctioning or overheating. Cable problems like frayed cord or weak connection.
How deep can a 6 1 2 inch circular saw cut?
The 18V Brushless Lithium Ion 6-1/2 Inch Deep Cut Circular Saw (C18DBALQ4) is a revolutionary cordless circular saw utilizing a 6-1/2″ blade which allows a 2-19/32″ cutting depth, making it one of the deepest cutting cordless circular saws on the market. This circular saw has a similar cut capacity as a 7-1/4″ saw!
How deep can a 5.5 circular saw cut?
It turns out that it’s a simple question but very essential when you are going to do a project using this kind of saw. To sum up, a standard circular saw can offer a cutting depth of 2.5 inches as the maximum, but you can adjust the depth to match your requirements.
