Cutting high tensile steel tubes & profiles on a very high performance level. Thin dedicated PVD coating for cutting steel tubes & profiles. Low friction for high speed cutting of harder materials.
SPECIAL METAL SAW BLADES / SEMI-HIGH SPEED. Special Metal Cutting SMC is a semi-high-speed saw blade that is recommended for cutting aluminum or plastic extrusions, profiles, tubes, window and door screen frame etc. SMC blades can withstand severe strains and rougher treatment compared to M-2 HSS which can crack or even break when used improperly. SMC blades can operate at speeds of up to 16,000 SFPM compared to M-2 HSS which should not be operated above 10,000 SFPM. This makes SMC a good choice for portable and bench top miter saws.
circular saw blades hss Related Question:
What are HSS circular saw blades?
HSS Saw Blades are designed for cutting non-ferrous metal and plastic where maximum cutting life between sharpening is required . Ideal for sawing a wide variety of sizes and shapes such as extrusions, tubes, sheets, plates and some bar stock.
What is a HSS cutting blade?
Super high speed steel saw blades, or SHSS cold saw blades as they are commonly known, are for use with a circular cold saw cut-off machines. HSS saw blades are used primarily to cut hard metals such as mild steel and stainless steel but can also be used for cutting softer metals such as copper and brass.
What type of blade is best for circular saw?
Mostly, a 24-tooth circular saw blade is preferred by many people, especially if you have to cross-cut lumber and sheet materials. The 24-tooth blade is good enough for you if the diameter is 7¼”. However, as the diameter increases, you should also consider looking for circular saw blades with more teeth.
What are the 3 basic types of circular saw blades?
They are: Rip Blades, Crosscut, Combination and Specialty blades. Ripping saw blades are designed primarily to achieve a smooth, clean and safe cut when ripping wood or cutting in the same direction as the wood grain.
What does TCT mean on saw blades?
Tungsten Carbide Tips. TCT saw blades are specifically designed for cutting metal tubing, pipes, rails, nickel, zirconium, cobalt and titanium-based metal. All of this is possible thanks to the teeth on the saw blades, and the tungsten carbide tips, or TCT.
What is a diamond blade used for?
Diamond blades are comprised of diamond impregnated segments attached to steel core. They are used to cut cured concrete, green concrete, asphalt, brick, block, marble, granite, ceramic tile, or just about anything with an aggregate base.
What must be used to sharpen tungsten carbide blades?
Carbide tools require diamond for sharpening, due to their hardness. Wet grinding using an abrasive wheel on an automatic grinder is a very precise method of sharpening. It is also possible to sharpen a tool by using a diamond lap, but this is very imprecise and time-consuming.
What are the different types of jigsaw blades?
There are four materials or material combinations in general use for the manufacture of jigsaw blades: high-carbon steel (HCS), high-speed steel (HSS), bi-metal (BiM), and tungsten carbide (often just called carbide). High-carbon steel is a low-cost material best used for wood-cutting blades.
Is more teeth on a saw blade better?
Blades with more teeth yield a smoother cut. Blades with fewer teeth remove material faster, but tend to produce a rougher cut with more “tearout”. More teeth means you will need to use a slower feed rate.
Can you use a metal cutting blade on a circular saw?
Only blades and discs specified for cutting metal should be used. These professional circular saw blades are perfect for cutting through aluminium, copper, lead and other non-ferrous metals; while these diamond cutting discs will make light work of cutting through stainless steel.
What saw blade makes the smoothest cut?
With fewer spaces between the teeth, crosscut blades remove less material, resulting in a smoother cut. It also means it takes these blades longer to move through wood. Crosscut blades are the go-to choice for finish carpentry and other applications that require precision and a smooth finish.
Can I use a 7 inch blade in a 7 & a quarter inch circular saw?
The only fine-tooth blade you have lying around is a 7 ¼ inch size. The short answer to the above questions is that you can generally use a smaller blade in a circular saw – within reason. Of course, there will be some drawbacks and changes in performance, especially when you size down by a significant margin.
What is a 60 tooth saw blade used for?
A crosscut blade, on the other hand, is designed to produce a smooth cut across the grain of the wood, without splintering or tearing. This type of blade will usually have 60 to 80 teeth, and the higher tooth count means that each tooth has to remove less material.
Can a 6 1 2 inch circular saw cut a 2×4?
Circular Saw Features The larger the blade, the deeper the cut. The most common blade diameter is 7-1/4 inches. Most saws with blade capacities of 6 inches or more can cut through 2-inch dimensional lumber at a 45-degree angle in a single pass.
Can I cut wood with a TCT blade?
A TCT (Tungsten Carbide Tipped) blade is a resharpened circular saw blade. TCT saw blades can be used for the following items: wood, some ferrous metals, non-ferrous metals and plastics.
