Dominate the jobsite with Diablo’s Large Diameter Circular Saw Blades for wood cutting applications. These blades are optimized for use in both corded & cordless table saws, miter saws, and radial arm saws. Diablo’s large diameter circular saw blades for wood cutting are available for ripping/cross-cutting, general purpose cutting, combination cutting, fine finish cutting & ultimate polished finish cutting.
circular saw blades large Related Question:
Whats the biggest blade for a circular saw?
Circular Saw Features The most common blade diameter is 7-1/4 inches. Most saws with blade capacities of 6 inches or more can cut through 2-inch dimensional lumber at a 45-degree angle in a single pass.
What sizes do circular saw blades come in?
Most circular saws come standard with a 7¼-inch-diameter blade and a motor that draws 8 to 15 amps of power.
Can I use a bigger blade on my circular saw?
The answer is generally this is not a great idea. A larger blade will put excess stress on the motor, and may not have enough strength to provide the cutting power at the tooth you need.
How deep can a 7 inch circular saw cut?
Circular Saw Sizes Standard-size saws use 7 1/4-inch blades and can cut a maximum depth of about 2 1/2 inches.
How deep can a 12 inch circular saw cut?
To sum up, a standard circular saw can offer a cutting depth of 2.5 inches as the maximum, but you can adjust the depth to match your requirements. It’s easy by moving the blade up and down to align against the material before starting to cut.
How deep can a 10 inch circular saw cut?
Makita 5104 14 Amp 10-1/4-Inch Circular Saw This large cutting capacity sidewinder can reach depths of 3 ¾ inches at 90 degrees, which allows users to easily cut into some timbers.
What is a 24-tooth blade used for?
For most construction work, a 24-tooth general use blade is sufficient. That blade is very aggressive and will help you rip and cross-cut lumber and sheet goods quickly and with a high degree of accuracy. With a 24-tooth demo blade, you’re getting work done quickly, but you won’t get a near-finished edge.
How many teeth do I need on my circular saw blade?
A 40-tooth blade works fine for most cuts through plywood. Blades with 60 or 80 teeth should be used on veneered plywood and melamine, where the thin veneers are likely to blow out on the underside of the cut, a characteristic known as tearout. MDF requires even more teeth (90 to 120) to get the cleanest cut.
How many teeth should my saw blade have?
TPI is the number of teeth the blade has per inch. If you’re looking to cut wood or other soft materials, you’ll need a blade with a TPI of 6 up to 20. For harder materials like metal, a TPI between 14 up to 36 is more suitable. The number of teeth can be found on the blade.
Can I put a 10-inch blade on a 12-inch saw?
By doing so, you can enjoy the optimal speed, performance, and precision needed while cutting. That said, it’s equally true that you can’t make the thicker or deeper cuts using a 10-inch blade over 12-inch. The bigger version offers relatively deeper yet less accurate woodcutting than the smaller-sized saw blade.
Can you use a 6 blade in 6.5 circular saw?
Short answer: No. Long answer: You should only ever use larger circular saw blades, when the difference is fairly negligible (1 mm / 1/16″).
Can you use a 7 inch blade on a 10-inch saw?
Yes, you can use a 7” blade on a 10” blade table saw. There will be a diminution in the depth of the cut, but it is possible to use a smaller blade. There will be less noise and less waste (sawdust) using the smaller blade, too.
Can a 6.5 inch circular saw cut 2×4?
The 6.5 will cut up to 2 1/16”, while the 7 ¼” cuts up to 2 ⅜”. Minor sure, but it’s when you tilt them into 45 degree angles, that the 7 ¼” can do something the 6.5 can’t. Cut through a 2×4.
Why is my circular saw burning the wood?
Pushing the stock through the saw too slowly is a common cause of saw blade burn. Sometimes a blade that feels dull might only be dirty. If wood pitch resins build up behind the teeth of the blade, the cutting speed will slow down, increasing the chances for burns. Commercial blade cleaners are sold for this purpose.
Will a 4.5 inch circular saw cut a 2×4?
The new WORXSAW Compact Circular Saw is capable of cutting a 2×4 in a single pass. The compact circular saw features a 4-1/2 in. blade that is up to 50 percent lighter than a full-size 7-1/4 in.
