Construction 7-1/4-in 24-Tooth Circular Saw Blade–Tougher tungsten carbide stays sharper longer–Specially formulated anti-stick coating minimizes friction and gum-up for smoother cuts–Thin kerf for fast and smooth cutting action–Ribbed heat vents allow blade to run cooler, reducing blade flexing and binding–Independently certified to meet applicable standards. Cokenut Member 294 posts 132 upvotes MrFrugal1 Deal Addict 4035 posts 3076 upvotes KINGSTON,ON. Perfect, thanks!I normally run the Freud Diablo blades , but this price is great. I’ll go for something else like 40 finish blade or a 60 fine finish blade instead. I can keep the one that came with the saw for rough cuts.
If you’re looking for a lightweight cordless circular saw, Metabo HPT is your best bet. Lightweight from the outset as the first cordless rear-handle circular saw, Makita’s XSR01 is still the lightest. Going cordless means pushing your budget closer to $200 for the performance of a brushless motor.
Use this Marathon saw blade for cutting vinyl fencing and siding. One 7 1/4 in, 120-tooth saw blade comes per package. As I experienced, the blade is terrible for cutting wood.
circular saw blades lowes.ca Related Question:
What type of blade is best for circular saw?
Mostly, a 24-tooth circular saw blade is preferred by many people, especially if you have to cross-cut lumber and sheet materials. The 24-tooth blade is good enough for you if the diameter is 7¼”. However, as the diameter increases, you should also consider looking for circular saw blades with more teeth.
Do all circular saw blades fit all circular saws?
Circular saw blades are designed for use with miter saws, table saws, radial arm saws, cut-off saws and standard circular saws. Many circular blades can be used interchangeably between devices.
Can I use a 7 inch blade in a 7 & a quarter inch circular saw?
The only fine-tooth blade you have lying around is a 7 ¼ inch size. The short answer to the above questions is that you can generally use a smaller blade in a circular saw – within reason. Of course, there will be some drawbacks and changes in performance, especially when you size down by a significant margin.
What are the 3 basic types of circular saw blades?
They are: Rip Blades, Crosscut, Combination and Specialty blades. Ripping saw blades are designed primarily to achieve a smooth, clean and safe cut when ripping wood or cutting in the same direction as the wood grain.
Is more teeth on a saw blade better?
Blades with more teeth yield a smoother cut. Blades with fewer teeth remove material faster, but tend to produce a rougher cut with more “tearout”. More teeth means you will need to use a slower feed rate.
How long does a circular saw blade last?
They can last between 12 and 120 hours of continuous use, depending on the quality of the blade and material they’re used to cut.
How many teeth should my circular saw blade have?
Number of Teeth Generally, blades with more teeth will provide a smoother, finer cut whereas blades with fewer teeth will provide a rougher cut. The benefit of fewer teeth is faster cutting and a lower price. For most construction work, a 24-tooth general use blade is sufficient.
Can you put any blade on a circular saw?
What is this? Not every circular saw is adequate for each material, which means that the blades are made according to whether you need them to cut wood, metal or concrete. Along with that, it is a fact that a single circular saw may need different special blades that aren’t universal or interchangeable.
Can I use a larger blade on my circular saw?
Can I use larger blades? Short answer: No. Long answer: You should only ever use larger circular saw blades, when the difference is fairly negligible (1 mm / 1/16″). The reason for that is that for safety reasons most saws are built to tight tolerances.
Can I put a metal cutting blade on my circular saw?
Only blades and discs specified for cutting metal should be used. These professional circular saw blades are perfect for cutting through aluminium, copper, lead and other non-ferrous metals; while these diamond cutting discs will make light work of cutting through stainless steel.
Can a 6 1 2 inch circular saw cut a 2×4?
Circular Saw Features The larger the blade, the deeper the cut. The most common blade diameter is 7-1/4 inches. Most saws with blade capacities of 6 inches or more can cut through 2-inch dimensional lumber at a 45-degree angle in a single pass.
What do the numbers on a circular saw blade mean?
The Number of Teeth: TLDR; More teeth: Smoother, finer cut. Fewer teeth: Faster, rougher cut. The correct number of teeth is important to ensure that you achieve a smooth cut with optimal chip removal and as little friction possible whilst sawing.
What is a 60 tooth saw blade used for?
A crosscut blade, on the other hand, is designed to produce a smooth cut across the grain of the wood, without splintering or tearing. This type of blade will usually have 60 to 80 teeth, and the higher tooth count means that each tooth has to remove less material.
Are Diablo blades worth it?
Diablo blades are available in a wide selection of sizes and styles and are easy to find online and locally at Home Depot. The consensus is that Diablo saw blades balance great quality with excellent value, and are a good choice when replacing or upgrading the OEM blades that are often bundled with new saws.
What size circular saw will cut a 4×4?
Cutting a 4×4 with a Circular Saw – Guide If you need to cut a 4×4 post, then the ideal tool is a large 12” miter saw. This saw has the blade diameter needed to chop through a 4×4 in a single pass, so if this is an option for you it’s the way to go.
