With a range of over 20 blade types we are able to offer the correct blade to suit any application. As sawing specialist, Precision Saw and Tool ltd offer a full range of HSS Circular saw blades, TCT saw blades as well as Steel cutting Segmental and Friction saw blades. Precision Saw and Tool Ltd offers a comprehensive Circular Saw blade repair service.
We supply quality band saw blades, and offer a comprehensive sharpening service for all types of saws, cutters and DIY tools. Our knowledge of grinding and modern grinding machines helps us to give saws and cutters a superior cutting edge. At North East Grinding, we know how to grind saws and cutters, so we can give you a wear resistant edge that will last longer.
Using state of the art laser technology in the manufacture of the saw bodies, robotic technology ensures state of the art accuracy and consistency in the manufacture of our products. Reduced resonances within the plate of the saw gives benefits in many cutting applications using “Q” Saw technology. Contact us today to begin designing your bespoke circular saws.
circular saw blades newcastle Related Question:
What type of blade is best for circular saw?
Mostly, a 24-tooth circular saw blade is preferred by many people, especially if you have to cross-cut lumber and sheet materials. The 24-tooth blade is good enough for you if the diameter is 7¼”. However, as the diameter increases, you should also consider looking for circular saw blades with more teeth.
Do all circular saw blades fit all circular saws?
Circular saw blades are designed for use with miter saws, table saws, radial arm saws, cut-off saws and standard circular saws. Many circular blades can be used interchangeably between devices.
Is it worth sharpening circular saw blades?
When your circular saw blade becomes dull, not only will it give you a rougher finish, but your saw’s motor will have to work harder and may burn out sooner. Sharpening your saw blades will save you money in the long run because you’ll get better cuts, and you’ll have to replace your saw and blades less often.
Can you use a 7 blade on a 6.5 circular saw?
NO, a 7″ blade will not fit inside the blade guard. Also, it’s rough on these little saws cutting concrete or tile unless you reduce the blade size.
What are the 3 basic types of circular saw blades?
They are: Rip Blades, Crosscut, Combination and Specialty blades. Ripping saw blades are designed primarily to achieve a smooth, clean and safe cut when ripping wood or cutting in the same direction as the wood grain.
Is more teeth on a saw blade better?
Blades with more teeth yield a smoother cut. Blades with fewer teeth remove material faster, but tend to produce a rougher cut with more “tearout”. More teeth means you will need to use a slower feed rate.
How many teeth do I need on my circular saw blade?
Number of Teeth Generally, blades with more teeth will provide a smoother, finer cut whereas blades with fewer teeth will provide a rougher cut. The benefit of fewer teeth is faster cutting and a lower price. For most construction work, a 24-tooth general use blade is sufficient.
Can you put any blade on a circular saw?
What is this? Not every circular saw is adequate for each material, which means that the blades are made according to whether you need them to cut wood, metal or concrete. Along with that, it is a fact that a single circular saw may need different special blades that aren’t universal or interchangeable.
Can I put a metal cutting blade on my circular saw?
Only blades and discs specified for cutting metal should be used. These professional circular saw blades are perfect for cutting through aluminium, copper, lead and other non-ferrous metals; while these diamond cutting discs will make light work of cutting through stainless steel.
How long do circular saw blades last?
They can last between 12 and 120 hours of continuous use, depending on the quality of the blade and material they’re used to cut.
What can I do with an old circular saw blade?
The best thing to do would be to recycle them at a scrapyard near you. Donate them to a school that has wood shops, art departments, or theater programs. Make interesting pieces of jewelry such as earrings out of circular saw blades. You can use a jigsaw to cut and shape them the way you want.
How do you sharpen a large circular saw blade by hand?
Start sanding each tooth of the blade back and forth with the sandpaper. Keep shifting to the next tooth after 10 back and forth movements. Go on until every tooth is sanded. This completes the sharpening of the circular saw blade.
Can I put a 5 inch blade on my circular saw?
While you can certainly use a smaller blade in a circular saw – as long as you keep it within reason, you might also be wondering if you can use a bigger blade in a circular saw. The answer is generally this is not a great idea.
Can a 6.5 circular saw cut a 2×4?
The 6.5 will cut up to 2 1/16”, while the 7 ¼” cuts up to 2 ⅜”. Minor sure, but it’s when you tilt them into 45 degree angles, that the 7 ¼” can do something the 6.5 can’t. Cut through a 2×4. Of course more capacity, typically means more weight.
How thick of wood can a 7 1 4 circular saw cut?
Circular Saw Sizes Standard-size saws use 7 1/4-inch blades and can cut a maximum depth of about 2 1/2 inches.
