Handheld circular saws typically accept blades 4-1/2 inches to 7-1/4 inches in diameter. The teeth are often carbide tipped to stay sharp longer. Tile saws most often use 7-inch or 10-inch diamond blades. Table saws and compound miter saws use blades 8-1/4 inches or 10 inches in diameter.
Power is what gives the saw cutting ability, the higher the power, the better, when it comes to choosing a circular saw. There are two figures used by manufacturers to rate the power of a circular saw in the UK and Europe Watts is used and in the US amperes are used. For cordless circular saws as with other cordless power tools, the Volts will determine how much power is available, the most common power supply or battery size for power tools is 18V. As I said before many top brands like Hikoki, DeWalt and Makita have invested in new Lithium-ion technology and offer much higher voltage cordless options that give a great cutting performance.
Whether you’re using a circular saw, table saw, miter saw, or radial-arm saw, this guide will give you the minimum saw blade size for popular board heights. On smaller circular saws, the bore is generally 3/4″ or less. Miniature hand-held power saws even have bores as little as 1/4″. On the other hand, larger miter saws and table saws will have a shaft closer to 1″ to 1-1/4″ in diameter.
circular saw blades sizes Related Question:
Can you use different size blades on circular saws?
While you can certainly use a smaller blade in a circular saw – as long as you keep it within reason, you might also be wondering if you can use a bigger blade in a circular saw. The answer is generally this is not a great idea.
Can you use a 7 blade on a 6.5 circular saw?
NO, a 7″ blade will not fit inside the blade guard. Also, it’s rough on these little saws cutting concrete or tile unless you reduce the blade size.
Can you use a 7 inch blade on a 10 inch saw?
Yes, you can use a 7” blade on a 10” blade table saw. There will be a diminution in the depth of the cut, but it is possible to use a smaller blade. There will be less noise and less waste (sawdust) using the smaller blade, too.
Can you use a 6 blade in 6.5 circular saw?
Short answer: No. Long answer: You should only ever use larger circular saw blades, when the difference is fairly negligible (1 mm / 1/16″).
Can a 6.5 circular saw cut a 2×4?
The 6.5 will cut up to 2 1/16”, while the 7 ¼” cuts up to 2 ⅜”. Minor sure, but it’s when you tilt them into 45 degree angles, that the 7 ¼” can do something the 6.5 can’t. Cut through a 2×4. Of course more capacity, typically means more weight.
How thick of wood can a 7 1 4 circular saw cut?
Circular Saw Sizes Standard-size saws use 7 1/4-inch blades and can cut a maximum depth of about 2 1/2 inches.
What is the smallest blade that can fit in a 7 1 4 circular saw?
Your saw manual should provide information on compatible blades, but here are some quick tips. Handheld circular saws typically accept blades 4-1/2 inches to 7-1/4 inches in diameter. The teeth are often carbide tipped to stay sharp longer. Tile saws most often use 7-inch or 10-inch diamond blades.
Can you use a 8 blade on a 10 table saw?
As long as the diameter of the arbor hole on the stacked dado blade set matches the arbor diameter of your table saw or radial-arm saw—and the arbor is long enough for a dado blade—you can use an 8-inch dado blade on a 10-inch table saw.
Can you put a 12 blade on a 10 table saw?
The arbor is usually smaller on a 12-inch saw than on a 10-inch blade. The arbor on a 10-inch blade is usually 5/8-inch, while a 12-inch blade uses a 1-inch hole or arbor.
Can I put a 10-inch blade on a 12-inch saw?
By doing so, you can enjoy the optimal speed, performance, and precision needed while cutting. That said, it’s equally true that you can’t make the thicker or deeper cuts using a 10-inch blade over 12-inch. The bigger version offers relatively deeper yet less accurate woodcutting than the smaller-sized saw blade.
How thick of wood can a 6 1 2 circular saw cut?
Depth. A 6 ½ circular saw can cut materials up to 2.5 inches. It’s perfect for cutting small materials for a small DIY project.
How thick can a 6 1 2 circular saw cut?
The 18V Brushless Lithium Ion 6-1/2 Inch Deep Cut Circular Saw (C18DBALQ4) is a revolutionary cordless circular saw utilizing a 6-1/2″ blade which allows a 2-19/32″ cutting depth, making it one of the deepest cutting cordless circular saws on the market. This circular saw has a similar cut capacity as a 7-1/4″ saw!
How thick of wood can a 5 1 2 circular saw cut?
The blade, located on the left side, cuts up to 1-3/4-inch at 90 degrees and 1-3/16-inch at 45 degrees.
How thick a piece of wood can a circular saw cut?
Generally, the blade of a circular saw can cut wood of thickness up to 2.5 inches. Depending on the thickness of the wood being cut, you need to change your blade’s depth. Since your wood is thick, ensure you are using Carbon-tipped blades. Use a crosscut blade for smoother cuts and rip blades for grain cuts.
What is the most popular size circular saw?
The most common and useful size for DIYers is 7 and 1/4 inches. Saws this size will cut through material more than 3-inches thick, and they also offer the widest variety of blade choices for cutting substances other than wood.
