Ensure straight cuts with these two, simple cutting guides. With these two saw guides, you can use your circular saw to make cuts that rival a table saw’s for speed and accuracy. To use this circular saw guide rail, line the guide up with your marks, clamp it down, and run your saw along it to make a cabinet-quality cut. Even if you own a table saw, it’s often easier to use a circular saw guide than to wrestle a big sheet of plywood through your table saw. You’ll customize the guide to your saw, allowing you to simply align the edge of the guide with your cutting marks and clamp it down. Glue the fence to the base, then run the saw against the fence to cut the guide. Like the straightedge guide, the crosscut guide is customized to your saw so you can simply line up the edge of the guide with your cutting mark and clamp it.
Steps: Mark the cut line onto the workpiece, then measure the distance from the circular saw blade to the edge of the saw shoe. Guide the circular saw along the fence to trim the base to the proper width. Then guide the saw along the fence to make an accurate, perfectly straight cut.
All in all, we think that these are the best circular saw guide rails of this year. The Kreg KMA2700 Circular Saw Guide Rail is our top choice and is a perfect example of a circular saw guide rai with all the right features. The Kreg KMA2685 Circular Saw Guide Rails is our best value, and though it’s short, it has all of the features as the top model and is perfect for smaller shops and projects.
I planned to replace it once I settled into my new house, but when the time came to build a room divider/bookshelf unit, I decided to build a couple of my own makeshift circular saw guides instead. The guides are compact and store easily. It’s quick, safe and especially useful when you need to cut a sheet of plywood down to size or to rip a long straight edge on a wide piece of lumber to prepare it for further ripping on a table saw. The only difference is that I put a 1 x 2 stop on the bottom, perpendicular to the 1 x 4 guide, which automatically squares the guide across the piece being cut.
Now that you know how to use a circular saw rip fence you might be wondering which one to get. The Bora WTX 50 Inch Circular Saw Guide fence truly goes the distance, letting you rip long boards up to 50 inches. Hopefully you’ve learned a few things about how to use a circular saw rip fence.
circular saw fence guide Related Question:
Can you use a guide rail with a circular saw?
A Guide Rail is designed to be used with a Circular Saw for creating precise and straight cuts every time.
Are guide rails universal?
The YouTool Guide Rail is universally suitable for almost all brands of saw, and is available up to 5 meters long.
What is used to guide the piece through the saw?
A “Push Stick” is: A plastic handle or scrap wood shaped so that you can guide the work piece without getting your fingers near an active blade.
Which way should the teeth face on a circular saw?
The teeth should be cutting UPWARDS, in a clock-wise direction. You’ll also notice that when your blade is installed correctly, the teeth will be pointing upward. Remember: circular saws (as most saws) cut on the upward stroke.
Can you use Makita circular saw on guide rail?
Enables use of DHS680 Circular Saw with the Makita guide rail system. This adaptor can be attached to Makita circular saws, which allows you to use the circular saws with the Makita SP6000 guide rail system for precise, straight routing cuts.
How many teeth do you need for plywood?
Cross-cutting wood or sawing plywood: Use a 40-tooth to 80-tooth blade. You can use a 40-tooth to 50-tooth general purpose blade as well. Joinery work: Use a 40-tooth to 50-tooth all-purpose combination blade. Cutting MDF and man-made materials: Use a 50-tooth to 80-tooth blade.
When cutting plywood with a circular saw which side is up?
Also note that a circular saw cuts on the upstroke, which often splinters the top edge (veneer) slightly. The bottom edge usually remains splinter-free. So always cut plywood with the good side down.
How do you cut a plywood with a circular saw without splintering?
To do so, place the best side (meaning the side of the door that will be most visible once it’s hung) face down. Then score along the edge of the cut line with a sharp utility knife. Now when you make the cut, the wood fibers will break off cleanly at the scored line, leaving a smooth, splinter-free cut.
Can I convert my circular saw to a track saw?
There has been a lot of buzz about Track Saws with both DeWalt, and Makita finally coming out with versions for the USA. But I bet many people don’t know that you can turn just about any circular saw into a track saw for a fraction of the cost of a complete track saw package all with a kit from EurekaZone.
Why is festool so good?
So what makes Festool so good? We believe it’s because Festool has focused on creating high-performing tools that are robust, reliable and precise. Their numerous innovations, like their dust extractors and cordless options, put Festool in a league of their own.
