Video- Cutting a 45 degree Angle with a Circular Saw. As the first step, I’ll show you how to use a circular saw to do a 45° angle bevel cut. This DIY guide will teach you how to make a 45 degree cut in wood using a circular saw.
Smooth angle cuts Photo 1: Line up the saw and guide. Then use the same cutting technique for angle cuts as we showed for right-angle bevel cuts. Many saws have a set of notches or marks on the front of the base plate to help in aligning and guiding the saw for freehand cuts.
There are two basic types of 45-degree angle cuts one can make with a circular saw – the miter cut and the bevel cut. While these cuts are typically made using a compound miter saw, you can also cut a 45-degree angle bevel using a circular saw. Keep in mind you can cut the miter angle to whatever angle you like, and the bevel angle to any angle as long as your saw’s bevel angle adjustment goes that far.
In this Circular Saw 101 video, This Old House contributor Mark Clement shows how to set the bevel-adjustment lever for angled cuts. Learn to set the lever for a 45-degree angle or to correctly match an angle for any other unique measurement.
circular saw for cutting angles Related Question:
What saw to cut angles?
A miter saw is the tool for projects that require accurate lumber and moulding cuts — especially angles.
Can you make miter cuts with circular saw?
When extreme precision isn’t required, you can cut 45-degree miters using a portable circular saw and speed square. 7. Hold the square against the board, then guide the saw along the square to make the cut.
Which saw is used to cut metals?
Circular Saw with Metal Cutting Blade or Metal Circular Saw Roofing, sheet metal, and corrugated metal—basically any metal that generally requires just a simple, straight cut—can be cut by a circular saw with the right blade.
What is the best way to cut a 45 degree angle?
Miters: Use a Sharp Saw Blade Check your blade for sharpness by cutting a 45-degree miter on a 1×3 or larger piece of oak or other hardwood. If you don’t know how to cut a 45 degree angle, just look at the angle measurements on the base of the miter saw.
Can you cut 45 degree angles with a table saw?
A table saw can be the perfect tool for making accurate 45-degree cuts. While there are other tools that can do this, if your workpiece is fairly large, the table saw is your best bet. There are two kinds of 45 degree cuts possible on a table saw, a 45-degree miter cut and a 45-degree bevel cut.
How do you cut a 60 degree bevel angle on a miter saw?
Place your workpiece against the new backing fence, and turn the blade adjustment to 45 degrees. The 45 degrees, plus the additional 15 degrees will give you a total angle cut of 60 degrees.
How do you make angled cuts?
The formula involves dividing 360 by the number of sides to calculate the corner angle. Then divide it by two to get the miter angle. If you’re making a five-sided project with all sides equal, you divide 360 by five to get 72 degrees. So each joint or corner forms a 72-degree angle.
