When most people think about cutting laminate flooring I bet they think of using a miter saw and maybe a jigsaw for some of the specialty cuts but what they don’t realize is that there are many different tools that will cut laminate flooring. A Circular Saw: You can also use a circular saw but it will require additional tools like a square and some type of work surface to cut the laminate flooring on. You simply use leverage to cut the pieces, putting force down on the blade to cut the flooring.
The majority of my local work consists of custom kitchens, built-in cabinetry, trim work and finish carpentry. I am always trying to come up with better and more efficient ways to work. My Multi Purpose Table design came from my desire for a more efficient way to work along with being able to build it myself rather than buying something commercially made.
There are several types of saws that you can use to work on laminate flooring. The best saw for laminate flooring would depend on your personal preference and what you are looking to do with it! All of these saws in our guide can cut through a variety of materials while still being versatile in their abilities. Take a look at our recommended saws and read about their benefits to see which saw may be best for you!
circular saw for cutting flooring Related Question:
Can I cut flooring with a circular saw?
A Circular Saw: You can also use a circular saw but it will require additional tools like a square and some type of work surface to cut the laminate flooring on. Sawhorses and a piece of plywood would make a pretty ideal workbench for this task and would be the easiest and most convenient method, in my opinion.
What type of saw do you use to cut flooring?
A jigsaw is a real all-rounder when it comes to cutting laminate floors. It’s best used to cut out shapes from your board. For example, when you want to place boards around your toilet or maybe a pillar. Always use a fine toothed blade and have the saw blade spinning before you touch the board.
What is the best tool to use to cut laminate flooring?
Circular saws are a really efficient tool for laminate flooring to cut without the size restrictions of a mitre saw. However, you usually will require a cutting table set up to use and plenty of space to cut.
Can I use a hand saw to cut laminate flooring?
You can perfectly well saw your laminate floorboards with a regular hand saw. First make a short incision and then continue to saw. Put the saw line as close as possible to the bearing surface and clamp the loose piece down. Cut with the decorative side of the panel up to avoid damaging the decor.
Do you cut laminate flooring upside down?
4. Sawing laminate. If you’re sawing laminate with a hand saw, make sure you turn the good-looking side up. With a radial arm saw, circular saw, jigsaw, or table saw, you should rather saw the planks with the good-looking side down.
How do you cut laminate plank flooring?
In fact, you can cut the planks using a table saw, miter saw, circular saw, hand saw or laminate cutter. However, using a diamond blade is recommended as laminate can be tough to cut through and may damage another type of blade. Typically, you will cut with the finished side up.
Do you cut the tongue off the first row of laminate?
Place the first plank with the tongue side towards the wall, being sure to allow 1/8″ for expansion. We recommend cutting off the tongue on this first row to avoid any problem with the expansion gap. Insert the second plank into the first at an angle pressing the short ends together; then press it down.
Can you use a table saw to cut vinyl plank flooring?
It cuts just like wood or MDF. I just installed a vinyl plank floor and I was able to do cross cuts by snapping and scoring, cut around door jams using a jigsaw and rip it to length on the table saw.
Do you cut laminate flooring face up or down?
If you use a jigsaw blade with downward oriented teeth, you should place the boards with the face up. In this manner the saw won’t chip the edges and you will get proper cuts. If you have a blade with upward oriented teeth, you should place the laminate planks with the top-face down.
Can laminate flooring be cut with a knife?
Yes. You can cut laminate wood flooring with a utility knife. The utility knife has all the power and cutting capacity to cut through laminate wood flooring whilst not chipping the blade off.
How many tooth saw blade for laminate flooring?
Diamond-tipped blades that are made for laminate and fiber cement usually have a low number of teeth to reduce the dust produced by cutting cement. However, typical circular and miter saw blades that are used for laminate will have 80 to 100 teeth for fine, precision cutting.
What saw to use to cut vinyl planks?
Flooring and siding cutters can be rented, but you will still need a circular saw or table saw to rip a vinyl plank to width.
What do you cut vinyl plank flooring with?
Time to cut your vinyl plank flooring! Use the score-and-snap method for cutting along shorter lines, and a jigsaw for longer cuts. And whatever method you’re using, make sure you double check your measurements first. You won’t be able to stick your planks back together if you make a mistake.
Can I use a chop saw to cut vinyl flooring?
You can use different types of tools to cut vinyl flooring. Similarly, you can use different types of saw blades to cut vinyl flooring also. For example, you can use a chop saw, a circular saw, or even a table saw to get the job done.
Can I use a jigsaw instead of a circular saw?
Although a jigsaw can be used for most of the tasks that a circular saw can perform, including straight cuts and cuts on a tilt, the jigsaw uses that really take advantage of the tool’s qualities are jobs such as kitchen fitting and joinery, with their frequent need for complex cuts.
