Once your worktops have been planned/set out you can start to cut worktop to length ready to join or edge them up. Always start the saw away from the material and once running at full speed and starting from the front edge of the worktop cutting towards the back slowly cut the worktop. Set the depth of the cutter to 5-8mm and when the router is at full speed start to cut worktop to length by sliding the router along the straight edge.
If you feel this is a task you can take on yourself, we’ll explain exactly which tools you’ll need, how to measure and, ultimately, how to cut kitchen worktops to size. As the old saying goes: “Measure twice, cut once”, although we’d highly recommend measuring, re-measuring and then measuring a third time, to ensure your kitchen worktops fit perfectly. Circular saws cut in an upwards motion, so should make a clean cut straight through the surface and produce rougher exit cuts through the chipboard surface-the bit which won’t be visible once installed.
Besides looking at how to cut laminate countertop, we will also help you choose the right saw blade so that you will be able to cut the laminate much more comfortable. Now to the meat and potatoes of the article – how to cut laminate countertop with a circular saw using a blade we described above. So there you have it, this is how to cut laminate countertop with a circular saw.
You do not need to have a powerful router and accessories to cut a kitchen worktop to size at the corner. To create a clean, precise corner solution, as shown, you need a special worktop template, a cutter and a particularly powerful router to connect the kitchen worktops. The only disadvantage of mitre joints: If you have a worktop with a depth of 60 cm, you need a worktop that is 60 cm longer.
circular saw for cutting kitchen worktops Related Question:
Can you cut a kitchen worktop with a circular saw?
A circular saw is often the best option to cut laminate worktops. Make sure the blade is sharp (replace the blade if you have been using it for a while) and suitable for fine cuts—it should cut through the worktop without any issue.
What is the best saw for cutting kitchen worktops?
Circular Saws A circular saw is the most efficient tool for cutting a worktop down to size.
What is the best circular saw blade for cutting worktops?
For solid and veneered worktops, you need a cross-cut, fine tooth saw blade with 48 teeth. For laminated worktops, it is advisable to use the triple chip grind saw blade, also with 48 teeth.
What kind of saw do you use to cut laminate countertops?
Cutting a post-form laminate countertop to length requires a clean, straight cut. The best DIY tool for the job is a circular saw with a fine-tooth carbide blade made for laminate (the same blades are typically sold for non-ferrous metals and other types of plastics). You can also use a jigsaw with a fine-tooth blade.
How can I cut my countertop without chipping?
Outfit the jigsaw with a blade designed for use with laminate or particle board. Then, use a drill with a spade or paddle bit to drill a starting hole for your countertop cutting jig. Cut around the outline, and then remove the remaining tape to reveal the clean edge.
How do you cut a laminate countertop with a circular saw?
Because a circular saw can produce jagged edges and chip the laminate, your best bet is to lay the laminate face-side down and cut from the back to the front. Mark off the line you want to cut using masking tape, and make sure to leave a bit of extra room for overhang, which you can later cut off.
Can you cut kitchen worktop with Jigsaw?
The Bosch T101BR jigsaw blade is an ideal choice for cutting laminate materials. The blade cuts on the down stroke, not on the upstroke, the “R” in the product code referring to its “reversed” teeth. This is a popular blade often referred to as a worktop blade.
What is a 40 tooth saw blade used for?
Deep gullets provide good chip removal. Crosscut blades, made for cutting across the woodgrain (across the face of a board), have between 40 and 80 teeth and are designed for clean cuts. Smaller gullets separate the teeth. Combination blades can make both rip cuts and crosscuts.
Can you use a table saw to cut laminate countertop?
You can use any type of saw blade to cut a laminate countertop with a table saw but some people like using a carbide blade, fine tooth blade, or a jigsaw blade. Carbide-tipped blades and fine-tooth blades will give you the most accurate cuts and are more durable than other types.
How do you cut a laminate countertop by hand?
Measure at the top, bottom and middle of the edge along the countertop and place a pencil mark in each location. Draw the marks on top of the painter’s tape. Connect the marks using a straightedge so that the cut line is straight and square. Saw the counter along the cut line with the handsaw.
Can a jigsaw cut laminate countertop?
Yes, it is possible to cut a laminate countertop with a jigsaw. You can also use a circular saw or a router for this purpose. Make sure that the blade of the jigsaw is downward stroking instead of upward. How do you cut laminate counter-top without chipping?
How do you cut a laminate worktop edging with a router?
Turn the router on. Place the router base flat against the laminate surface. Hold the router firmly against the edge of the cabinet, and move it against the bit’s direction of travel. Trim the entire edge with one continuous cut.
Can you cut worktop with a plunge saw?
Not everybody has a Plunge saw as they can be expensive to own if you are not going to use it regularly enough. But this type of saw will make setting out and cutting worktop to length so much quicker, neater and more accurate than a standard circular saw.
What is the standard cut out for a kitchen sink?
Setting the Standard The average kitchen sink measures 22-by-30 inches.
Is it easy to cut laminate countertop?
Cutting laminate countertop is a pretty straightforward process. Laminate countertop comes in standard sizes that you will just need to cut to length to fit your counter space.
