If you don’t have any other type of a saw available, you can cut molding using a circular saw and a speed square. This handy tool clamps to the end of any piece of molding to cut accurate 45- or 90-degree angles when installing molding. Using a circular saw to cut molding isn’t ideal, and it can be tricky to handle.
These types of saws can cut nearly any type of wood using blades with a TPI between 8 and 10. While the most common blade diameter for circular saws is 7¼ inches, you can find saws with blades as small as 4 inches for light woodworking projects or a large as 12 inches for cutting heavy timbers. While all miter saws make angled cuts, a compound miter saw has the ability to tilt on its axis to make slanted cuts in addition to angled cuts.
circular saw for cutting trim Related Question:
How do you cut a wood trim with a circular saw?
Splice all pieces of molding with a 45-degree angle cut. Do this by setting the circular saw to an angle of 45 degrees and cutting each piece with a carpenter’s square and the saw set at a 45-degree angle. Check that the two 45-degree cuts line up to fit in a complementary way.
What type of saw is best for cutting trim?
A miter saw is a perfect tool for cutting moulding or wood trim. Miter saws have a gauge on the saw table that lets you set the saw to make accurately measured angle cuts. Single compound miter saws let you tilt the saw blade in a single direction to make precise bevel cuts at different angles.
Can a circular saw make miter cuts?
When extreme precision isn’t required, you can cut 45-degree miters using a portable circular saw and speed square. 7. Hold the square against the board, then guide the saw along the square to make the cut.
Can you cut Quarter round with a circular saw?
4. Using a Circular Saw to Cut the Quarter Round Corner. The next technique that can help you to cut the quarter round or baseboard piece is using a circular saw. Now some of you may not agree but a circular saw can help you in many situations.
What size Mitre saw for trim work?
If you only expect to use your miter saw for cutting trim or siding, and don’t plan on cutting anything more than an inch thick or 6 inches wide, a 10-inch miter saw should be sufficient. But if you need to cut larger boards, or just want more versatility, a 12-inch miter saw is the better choice.
Can you use a circular saw to cut baseboards?
You can also cut baseboard molding with a circular saw, but the vertical type of cut needed for baseboard requires that you tilt the base of the circular saw to 45-degrees. This is difficult and not recommended unless you are a professional because of possible kickback.
Can I use a circular saw instead of a miter saw?
Circular saws do have more versatility than miter saws. Every cut you can make on a miter saw can also be done on a circular saw, plus a few more. This is why my dad (and some others on the internet) recommend starting with a circular saw. But circular saws are tedious to use.
How do I make an accurate cut with a circular saw?
Using a Straightedge for Accurate Circular Saw Cuts Measure the exact distance from the edge of the circular saw’s shoe to the same side of the blade. Once you have that measurement, add it to your original marks and make a new line. Set the straightedge on the new marks, clamp it down, and make your cut.
Can I use a circular saw to cut angles?
All circular saws can be adjusted to make angled bevel cuts up to at least 45 degrees.
How do you cut trim without a miter saw?
Since you can choose from multiple different tools to achieve this, it should be easier for you to replace a miter saw and use something like a hand saw, jigsaw, or a regular circular saw for cutting pieces of molding, whether it be basic molding joints or a more precise angle cut.
What angle do you cut wood to make a circle?
The more segments you combine to make a circle, the smoother the grain appears to flow between segments, Craig. For the diameter of your circle, eight segments should be enough. Also, this makes the necessary 22.5° miter angles easy to cut.
Can you bevel with a circular saw?
Circular saws commonly include an adjustment that allows you to set the blade angle anywhere from zero to 45 degrees. Using this feature, you can cut a bevel along the length of a board and a miter across the end.
What is an undercut saw used for?
Although it is used to cut materials, an undercut saw has a slightly different function and purpose than a standard circular saw. When installing flooring materials such as wood in an existing home or building, it might be necessary to trim door jambs or trim so that the flooring will fit under the door.
How do you cut quarter round trim?
Quarter round will always be cut at an angle, usually 45 degrees. Cut 2 joint pieces at 45-degree angles in the same direction (meaning both angled to the left, or both to the right). These joint pieces should fit together to form a flat line against the wall. Most corners will be 90-degree angles.
Can a 10 inch sliding miter saw cut a 2×8?
Typically, a 10-inch miter saw will cut a 2 x 6 at 90 degrees and a 2 x 4 at 45 degrees; a 12-inch miter saw will cut a 2 x 8 at 90 degrees and a 2 x 6 at 45 degrees. Saws also differ by whether the blade arm simply rotates (a basic miter saw) or both swings and slides (a sliding miter saw).
