Once your worktops have been planned/set out you can start to cut worktop to length ready to join or edge them up. Always start the saw away from the material and once running at full speed and starting from the front edge of the worktop cutting towards the back slowly cut the worktop. Set the depth of the cutter to 5-8mm and when the router is at full speed start to cut worktop to length by sliding the router along the straight edge.
You do not need to have a powerful router and accessories to cut a kitchen worktop to size at the corner. To create a clean, precise corner solution, as shown, you need a special worktop template, a cutter and a particularly powerful router to connect the kitchen worktops. The only disadvantage of mitre joints: If you have a worktop with a depth of 60 cm, you need a worktop that is 60 cm longer.
If you feel this is a task you can take on yourself, we’ll explain exactly which tools you’ll need, how to measure and, ultimately, how to cut kitchen worktops to size. As the old saying goes: “Measure twice, cut once”, although we’d highly recommend measuring, re-measuring and then measuring a third time, to ensure your kitchen worktops fit perfectly. Circular saws cut in an upwards motion, so should make a clean cut straight through the surface and produce rougher exit cuts through the chipboard surface-the bit which won’t be visible once installed.
Besides looking at how to cut laminate countertop, we will also help you choose the right saw blade so that you will be able to cut the laminate much more comfortable. Now to the meat and potatoes of the article – how to cut laminate countertop with a circular saw using a blade we described above. So there you have it, this is how to cut laminate countertop with a circular saw.
circular saw for cutting worktops Related Question:
Can you cut a worktop with a circular saw?
A circular saw is often the best option to cut laminate worktops. Make sure the blade is sharp (replace the blade if you have been using it for a while) and suitable for fine cuts—it should cut through the worktop without any issue.
What saw is best for cutting worktops?
A circular saw is the most efficient tool for cutting a worktop down to size.
What is the best circular saw blade for cutting worktops?
For solid and veneered worktops, you need a cross-cut, fine tooth saw blade with 48 teeth. For laminated worktops, it is advisable to use the triple chip grind saw blade, also with 48 teeth.
What kind of saw do you use to cut laminate countertops?
Cutting a post-form laminate countertop to length requires a clean, straight cut. The best DIY tool for the job is a circular saw with a fine-tooth carbide blade made for laminate (the same blades are typically sold for non-ferrous metals and other types of plastics). You can also use a jigsaw with a fine-tooth blade.
How can I cut my countertop without chipping?
Outfit the jigsaw with a blade designed for use with laminate or particle board. Then, use a drill with a spade or paddle bit to drill a starting hole for your countertop cutting jig. Cut around the outline, and then remove the remaining tape to reveal the clean edge.
Can you cut kitchen worktop with a hand saw?
it is best to use a circular saw for cutting work tops to length, and if so work from the bottom of the worktop, NEVER from the top, as the teeth on a circ blade cut UPWARDS..and also cut from the front bullnose or what ever face shape, as if you start from the back you risk breakout from the front…but never use a …
Is a plunge saw the same as a circular saw?
A plunge saw is like a circular saw with a blade that spins and cuts, only with much more sophistication and accuracy. Rather than the guard retracting to expose the blade when cutting, such as with a circular saw, it has a fixed guard and the blade is exposed when plunging the handle to the pre-set depth.
How do you cut a kitchen countertop?
To cut through laminate countertops, you can use a hand saw, but a circular saw makes the job much quicker. Because a circular saw can produce jagged edges and chip the laminate, your best bet is to lay the laminate face-side down and cut from the back to the front.
What is a 40 tooth saw blade used for?
Deep gullets provide good chip removal. Crosscut blades, made for cutting across the woodgrain (across the face of a board), have between 40 and 80 teeth and are designed for clean cuts. Smaller gullets separate the teeth. Combination blades can make both rip cuts and crosscuts.
How many teeth do I need to cut a laminate countertop?
This 80-tooth blade is an excellent choice for cutting laminate, as well as hardwood, plywood, and softwood. Don’t be fooled by the small appearance of the blade; while it does seem smaller than some other blades, the performance will probably be even better for it.
How do you cut laminate with a circular saw?
Cut From the Backside Measure and mark the laminate flooring from the backside if you’re going to use a circular saw, and then cut from that side as well. You should do this because the saw blades enter the wood from the underside and emerge at the top. Furthermore, most of the chipping occurs at the emergence stage.
Can you use a table saw to cut laminate countertop?
You can use any type of saw blade to cut a laminate countertop with a table saw but some people like using a carbide blade, fine tooth blade, or a jigsaw blade. Carbide-tipped blades and fine-tooth blades will give you the most accurate cuts and are more durable than other types.
Can you use Makita circular saw on guide rail?
Enables use of DHS680 Circular Saw with the Makita guide rail system. This adaptor can be attached to Makita circular saws, which allows you to use the circular saws with the Makita SP6000 guide rail system for precise, straight routing cuts.
Do I need a circular saw if I have a track saw?
All of the saws can be used without a track, just like a regular circ saw. But guiding them with a track guarantees dead-straight cuts. All the tracks work similarly: The saw straddles a raised rib that maintains a straight cutting line, and rubber grip strips on the bottom prevent the track from scooting during a cut.
Can I use a track saw as a circular saw?
Yes, you can use a track saw without a track. The saw will function the same as a circular saw when used this way. The Festool track saw even has a separate depth setting for use without the track.
