Replace the 24-tooth blade that came with the saw with a 50- to 60-tooth blade for cleaner crosscuts in solid wood, veneered plywood, and other sheet goods. Because a circular-saw blade cuts on an upward rotation, the bottom face, in which the teeth enter the cut, will almost always have a clean, tear-out-free surface. “A custom edge guide for your saw not only beats tear-out, but also makes it easy to align cuts. Start by building a jig based on the drawing below; adjust the width as needed for your saw. We made ours long enough for crosscuts in 4′-wide sheet goods. Make the base’s cutting side about 1⁄2” wider than the distance between your saw’s blade and the footplate edge below the motor.
Circular saws are one of the most popular power tools out there, and having one is an absolute must for any DIYer or craftsperson. Circular saws come in a number of styles and configurations. One of the first considerations when choosing a circular saw is whether you want a corded or cordless model.
So we’ve summoned all of our wisdom and powers of brevity to bring you this useful guide to choosing the right circular saw blade. Choosing the right circular saw blade for rip cuts might be even more important. We hope this article about choosing the right circular saw blade cuts through the confusion so you can select the best accessory for the job.
Be extremely careful when using a circular saw and wear proper eye, ear, and lung protection regardless of the blade that is installed. The better approach is to use a jig saw with a fine blade, or a table saw with an 80-tooth blade. Straight cuts with a circular saw and fine blade can work, especially if the panel and a straight edge guide board are clamped in place.
circular saw for fine cutting Related Question:
What is considered a fine tooth circular saw blade?
A 40-tooth blade works fine for most cuts through plywood. Blades with 60 or 80 teeth should be used on veneered plywood and melamine, where the thin veneers are likely to blow out on the underside of the cut, a characteristic known as tearout.
Which saw blades make the smoothest cut?
With fewer spaces between the teeth, crosscut blades remove less material, resulting in a smoother cut. It also means it takes these blades longer to move through wood. Crosscut blades are the go-to choice for finish carpentry and other applications that require precision and a smooth finish.
Is more teeth on a circular saw blade better?
The number of teeth on the blade helps determine the speed, type and finish of the cut. Blades with fewer teeth cut faster, but those with more teeth create a finer finish.
Can you rip a 2×4 with circular saw?
Choose the right circular saw blade: Typically ripping blades have fewer teeth (10 to 30) and are designed to cut through a large amount of material quickly along the grain of the wood. The best blade for ripping wood (or 2×4) using a circular saw would be a high-quality thin kerf blade like this-Thin Kerf Rip Blade.
Why does my circular saw kickback at the end of a cut?
Overheating a saw blade can cause it to warp and result in a kickback. Buildup of sap on the blades, insufficient set, dullness and unguided cuts, can all cause an overheated blade and kickback. Never set a blade deeper than is required to cut the work piece 1/8 in. to 1/4 in.
What saw blade for ripping?
Ripping solid wood: Use a 24-tooth to 30-tooth blade. You can use 40-tooth to 50-tooth multipurpose blade as well, but it will take longer. Cross-cutting wood or sawing plywood: Use a 40-tooth to 80-tooth blade. You can use a 40-tooth to 50-tooth general purpose blade as well.
How many teeth blade for ripping?
Ripping: 10-inch blades with 24-30 teeth and 12-inch blades with 40 or fewer teeth. Crosscutting: 10-inch blades with 60 teeth and 12-inch with 80 teeth.
What is a 140 tooth saw blade used for?
OVERVIEW. The CRAFTSMAN 7-1/4-in 140-tooth carbon circular saw blade is made for cutting plywood, OSB and plastic. With a fully hardened and fully flattened plate, along with 140 precision-ground teeth, this blade delivers precise cuts without chips or splinters in the wood or cracks in vinyl and plastic materials.
How many teeth should my circular saw blade have?
Number of Teeth Generally, blades with more teeth will provide a smoother, finer cut whereas blades with fewer teeth will provide a rougher cut. The benefit of fewer teeth is faster cutting and a lower price. For most construction work, a 24-tooth general use blade is sufficient.
Are Diablo and Freud the same?
Freud and Diablo Background The Freud Group is a global supplier of circular-saw blades, router bits, and cutters for enthusiast woodworkers, professional and industrial users. They produce under both the Freud and Diablo brands.
Are Diablo blades worth it?
Diablo blades are available in a wide selection of sizes and styles and are easy to find online and locally at Home Depot. The consensus is that Diablo saw blades balance great quality with excellent value, and are a good choice when replacing or upgrading the OEM blades that are often bundled with new saws.
What is a 60 tooth saw blade used for?
Honorable Mention: 60t or 80t Cross Cutting Blade A good cross cutting blade is designed to provide ultra-smooth cuts going across the grain without splintering or burning. And ultra-smooth cuts equate to better precision and tighter joinery in your projects. Generally, more teeth equals a better cut.
Can I put a metal cutting blade on my circular saw?
Only blades and discs specified for cutting metal should be used. These professional circular saw blades are perfect for cutting through aluminium, copper, lead and other non-ferrous metals; while these diamond cutting discs will make light work of cutting through stainless steel.
How deep can a 6 1 2 inch circular saw cut?
The 18V Brushless Lithium Ion 6-1/2 Inch Deep Cut Circular Saw (C18DBALQ4) is a revolutionary cordless circular saw utilizing a 6-1/2″ blade which allows a 2-19/32″ cutting depth, making it one of the deepest cutting cordless circular saws on the market. This circular saw has a similar cut capacity as a 7-1/4″ saw!
Can I rip wood with a circular saw?
One of the most common ways we use to make rip cuts with a circular saw is to clamp a straight edge. To do this accurately, you need to know the distance from the edge of your shoe to the blade. From your cutline, clamp both ends of your straightedge the distance you measured between the shoe edge and blade.
