Make circular saw cuts so clean that you don’t have to sand or touch up the plywood edges. Cutting speed depends on many factors, including the type and sharpness of the blade and the type of plywood you’re cutting. Spike Carlsen, an editor for The Family Handyman, will show you how to cut construction grade plywood and finish grade plywood with a circular saw in our video tutorial.
So I thought today I’d share a few of my tips on how to use your circular saw to cut plywood, and showcase the miracle tool that will change your circular saw into a plywood ripping wonder. When I cut plywood, I place the plywood on top of the foam, and cut right into the foam. If you are doing alot of plywood or sheet goods ripping with a circular saw, I recommend investing in a saw guide.
There’s one job for which the circular saw is particularly well-suited: cutting large sheets of plywood down to size. To help you make the cleanest, safest, most accurate cuts, I’ve listed six time-proven tips and techniques for cutting plywood with a circular saw. A circular saw is ideal for plunge cutting a hole into the middle of a plywood sheet.
So I’m showing you how to cut down plywood sheets easily and accurately so you can quickly move on to the fun stuff-the building . If you’ve noticed, I use A LOT of plywood around here. Now, you can totally use a table saw to cut down your plywood sheets. I have a really nice table saw, but I still prefer using a circular saw to cut my sheets down because trying to maneuver a heavy sheet of plywood through a table saw by myself is a struggle.
“I need a 7¼” blade to cut 4×8′ sheets of plywood for cabinets. Handle the saw carefully because the telescoping blade guard will not extend through the zero-clearance base to cover the spinning blade. Then retract the saw blade above the base, and attach the zeroclearance plate using double-face tape.
circular saw for plywood cutting Related Question:
Can you use a circular saw to cut plywood?
Circular saws can be used to make square, miter, bevel and compound-angle cuts. When fitted with the appropriate blade, it can even cut metal and concrete. However, there’s one job for which the circular saw is particularly well-suited: cutting large sheets of plywood down to size.
What circular saw blade is best for cutting plywood and why?
Best Circular Saw Blade: Ultra Fine Finish With 60 teeth and a . 059-inch kerf, the Freud D0760X Diablo Circular Saw Blade creates clean, smooth cuts on delicate material like veneer plywood and melamine. This thin kerf greatly reduces the chance of chipping and blowouts, and doesn’t waste any material.
What kind of saw blade is best for cutting plywood?
To get the best-quality cuts, invest in an 80-tooth blade designed for sheet goods. The small teeth take little bites to reduce chip-out and are steeply beveled at their edges to score the veneer face. You’ll have to slow your feed rate, but will get a much smoother edge.
What is a 40 tooth saw blade used for?
Deep gullets provide good chip removal. Crosscut blades, made for cutting across the woodgrain (across the face of a board), have between 40 and 80 teeth and are designed for clean cuts. Smaller gullets separate the teeth. Combination blades can make both rip cuts and crosscuts.
How do you cut Luan plywood?
You CAN cut luan along the grain (cutting along the 8 foot length) without scoring, but is is always best to score it before cutting no matter which direction you cut. There is one way to greatly help limit the splintering when cutting any wood veneer: Place masking tape over the cut line first.
How do you cut thin plywood?
To cut thin plywood correctly, you need to use a table saw with a blade that has a high teeth count. The more the teeth on the saw blade, the better it will cut plywood. You can also tape down both sides of the thin plywood with masking tape as that will prevent it from tearing or breaking.
What do you put under plywood when cutting?
Cut on Foam I keep a piece of rigid foam board in my workshop. When I cut plywood, I place the plywood on top of the foam, and cut right into the foam. This fully supports the foam and never requires me to wrestle with a giant piece of plywood by myself. I’ve been using the same piece of foam for about seven years.
How do you cut perfectly square plywood?
All you have to do here is to take that piece of plywood that you just cut, flip it over, and rip cut the other side. In other words, take the side that you have perfectly straightened in the first step and place it against the fence. Make sure that the fence is perfectly parallel to the blade.
How do you cut plywood by hand?
Cutting Plywood With a Handsaw Always start with a sharp saw blade. A miter handsaw has a stiffer blade and will help if you’re making smaller cuts. For longer cuts that need to be straight, consider using a stiff board as a jig to guide your saw blade. Simply clamp the board along your cut line.
How many teeth do you need for plywood?
Cross-cutting wood or sawing plywood: Use a 40-tooth to 80-tooth blade.
What is a 60 tooth saw blade used for?
A crosscut blade, on the other hand, is designed to produce a smooth cut across the grain of the wood, without splintering or tearing. This type of blade will usually have 60 to 80 teeth, and the higher tooth count means that each tooth has to remove less material.
How deep can a 6.5 circular saw cut?
The 6.5 will cut up to 2 1/16”, while the 7 ¼” cuts up to 2 ⅜”. Minor sure, but it’s when you tilt them into 45 degree angles, that the 7 ¼” can do something the 6.5 can’t. Cut through a 2×4.
What size circular saw will cut a 4×4?
Cutting a 4×4 with a Circular Saw – Guide If you need to cut a 4×4 post, then the ideal tool is a large 12” miter saw. This saw has the blade diameter needed to chop through a 4×4 in a single pass, so if this is an option for you it’s the way to go.
Can you cut Luan with a circular saw?
Woodworkers have found the wood beneficial in constructing doll houses and making small toys. Ideally, luan might be cut with a utility knife or small circular saw.
Is Luan the same as plywood?
Luan, also spelled lauan, refers to a tropical hardwood plywood product usually made from trees in the Shorea family. It has many home and hobby applications and is readily available at lumberyards and home improvement stores. The term typically refers to a plywood panel 1/4 or, less commonly, 1/8 inch thick.
