The saw guide definitely allowed me to cut down 11- 4 x 8 sheets much more quickly and easier than would have been the case if I had used my table saw. The cheap plastic construction means the guide won’t last very long and the short length of the guide required that I cut away the width that I don’t want for cuts greater than 24″ in width instead of cutting the width I do want, but having to take into consideration the width of the blade. As is, most of the plastic section that rides along the piece being cut reaches the end of the wood being cut before the circular saw blade has completed its cut.
Using a Circular Saw for All Kinds of Cuts Whether you’re cutting 2x4s to length, breaking down plywood sheets into a manageable size, creating joinery or making angled and beveled cuts, reach for a do-it-all circ saw. Tips for Using a Circular Saw Cut angles easier Cutting angles can be tricky because the blade guard often catches on the material as the saw begins to cut, even with a no-catch blade guard. Upgrade with a DIY Track Guide A simple and inexpensive track guide will let you cut straight, accurate lines with any circular saw.
Measure the offset of the circular saw guide to the blade. Run the saw along the scrap piece of wood and the cut should be straight. Run the circular saw alongside the scrap piece on both sides.
I planned to replace it once I settled into my new house, but when the time came to build a room divider/bookshelf unit, I decided to build a couple of my own makeshift circular saw guides instead. The guides are compact and store easily. It’s quick, safe and especially useful when you need to cut a sheet of plywood down to size or to rip a long straight edge on a wide piece of lumber to prepare it for further ripping on a table saw. The only difference is that I put a 1 x 2 stop on the bottom, perpendicular to the 1 x 4 guide, which automatically squares the guide across the piece being cut.
All in all, we think that these are the best circular saw guide rails of this year. The Kreg KMA2700 Circular Saw Guide Rail is our top choice and is a perfect example of a circular saw guide rai with all the right features. The Kreg KMA2685 Circular Saw Guide Rails is our best value, and though it’s short, it has all of the features as the top model and is perfect for smaller shops and projects.
circular saw guide for plywood Related Question:
Can I use a circular saw on plywood?
Circular saws can be used to make square, miter, bevel and compound-angle cuts. When fitted with the appropriate blade, it can even cut metal and concrete. However, there’s one job for which the circular saw is particularly well-suited: cutting large sheets of plywood down to size.
Can you use a guide rail with a circular saw?
A Guide Rail is designed to be used with a Circular Saw for creating precise and straight cuts every time.
Is there a guide for a circular saw?
A circular saw guide rail is a critical tool for making straight cuts on large boards, but choosing the best one for your workshop is not easy because there are many brands available, and a lot of newer woodworkers aren’t sure how to tell the difference from one brand to the next.
How many teeth do you need for plywood?
Cross-cutting wood or sawing plywood: Use a 40-tooth to 80-tooth blade.
How do you cut plywood cleanly?
The best thing you can do to get clean cuts in plywood is to use a zero-clearance insert. This closes the gap around the blade in the throat plate or shoe. On a table saw, you can buy an aftermarket insert blank, or you can easily make one yourself.
Are guide rails universal?
The YouTool Guide Rail is universally suitable for almost all brands of saw, and is available up to 5 meters long.
What is a rip guide on a circular saw?
The Rip-Cut easily makes straight, accurate, repeatable cuts without measuring, marking, or having to keep the saw on the cut line. The Rip-Cut does this with a long edge guide that follows the straight edge of the sheet you are cutting.
Does Kreg rip cut work with any circular saw?
A: Yes, the Rip-Cut will fit that saw fine. Helpful? A: The Kreg Rip-Cut is designed to work with a full size 7 1/4″ corded circular saw.
What is the best saw blade to cut plywood?
To get the best-quality cuts, invest in an 80-tooth blade designed for sheet goods. The small teeth take little bites to reduce chip-out and are steeply beveled at their edges to score the veneer face. You’ll have to slow your feed rate, but will get a much smoother edge.
What do you put under plywood when cutting with a circular saw?
Cut on Foam I keep a piece of rigid foam board in my workshop. When I cut plywood, I place the plywood on top of the foam, and cut right into the foam. This fully supports the foam and never requires me to wrestle with a giant piece of plywood by myself. I’ve been using the same piece of foam for about seven years.
How many teeth should a circular saw plywood blade have?
Framing blades have 24 teeth and are effective for jobs such as rough carpentry, where speed is more important than getting a clean cut. Plywood blades have 100 or more fine teeth designed to create a finish with minimal splintering.
How do you make plywood straight edges?
Try attaching one of the crooked sheets of plywood to one with a straight edge with a hot glue gun. Run through the table saw, then detach, flip it over and run it again.
Can I cut plywood with a jigsaw?
The jigsaw can be used to make both straight and curved cuts in a wide variety of materials, including wood, particleboard, plywood, plastic, metal, even ceramic tile. It’s also safe and easy to use, which is why it’s often the very first power saw a new DIYer buys.
What is the best tool to cut plywood with?
A circular saw, or skill saw, is a common tool used to cut plywood. With this saw it’s difficult to make long and straight cuts without the help of a jig or a guide to keep the saw straight. But simply clamping a board along the length of the plywood to use as a guide for your saw can remedy this.
Does Home Depot charge for cutting plywood?
Home Depot will cut plywood for free, provided you have purchased the material from the store. Employees will offer the first 10-15 cuts for free before charging a 50 cent fee per cut. Alternatively, you can purchase a circular saw or rent one for 4-hours, 1 day, 1 week, or 4 hours.
