Steps: Mark the cut line onto the workpiece, then measure the distance from the circular saw blade to the edge of the saw shoe. Guide the circular saw along the fence to trim the base to the proper width. Then guide the saw along the fence to make an accurate, perfectly straight cut.
Ensure straight cuts with these two, simple cutting guides. With these two saw guides, you can use your circular saw to make cuts that rival a table saw’s for speed and accuracy. Like the straightedge guide, the crosscut guide is customized to your saw so you can simply line up the edge of the guide with your cutting mark and clamp it.
I planned to replace it once I settled into my new house, but when the time came to build a room divider/bookshelf unit, I decided to build a couple of my own makeshift circular saw guides instead. The guides are compact and store easily. It’s quick, safe and especially useful when you need to cut a sheet of plywood down to size or to rip a long straight edge on a wide piece of lumber to prepare it for further ripping on a table saw. The only difference is that I put a 1 x 2 stop on the bottom, perpendicular to the 1 x 4 guide, which automatically squares the guide across the piece being cut.
All in all, we think that these are the best circular saw guide rails of this year. The Kreg KMA2700 Circular Saw Guide Rail is our top choice and is a perfect example of a circular saw guide rai with all the right features. The Kreg KMA2685 Circular Saw Guide Rails is our best value, and though it’s short, it has all of the features as the top model and is perfect for smaller shops and projects.
In this article, I’ve done my best to compare the five best circular saw guide rails – so you can have the best advice when looking at purchasing one for your circular saw. We start our review of the five best circular saw guide rails by looking at the Kreg KMA2700 Circular Saw Track. The Kreg Rip-Cut Circular Saw Guide is one of the best guide rails for the value you receive in exchange for the money you pay.
circular saw guide length Related Question:
Do I need a guide rail for circular saw?
If you want to make accurate cuts when using a circular saw and do it consistently, you need a guide rail. With these rails, you can control the blade far much better than when cutting without one. When cutting hard lumber, the blade can move unexpectedly, which can affect the cut accuracy.
Can you use a guide rail with a circular saw?
A Guide Rail is designed to be used with a Circular Saw for creating precise and straight cuts every time.
Is there a guide for a circular saw?
A circular saw guide rail is a critical tool for making straight cuts on large boards, but choosing the best one for your workshop is not easy because there are many brands available, and a lot of newer woodworkers aren’t sure how to tell the difference from one brand to the next.
Are guide rails universal?
The YouTool Guide Rail is universally suitable for almost all brands of saw, and is available up to 5 meters long.
How do you rip a 2×4 with a circular saw?
With the 2×4 firmly clamped on the table and the rip fence pressing against the side of the 2×4, turn on the circular saw and move it along the 2×4. Now, make sure that the rip fence stays pressed firmly against the 2×4. The rip fence pressing against the 2×4 is what determines the accuracy of this cut.
What can I use for a straight edge on a circular saw?
Use a Board as a Straightedge The key is to use a wide board so that you can keep your clamps clear of the motor of the circular saw.
What is a rip guide on a circular saw?
These simple-looking metal contraptions are designed to help you make long accurate rip cuts using only a circular saw. The basic idea of the rip fence is a guide that attaches to the base of your saw and allows you to cut at a fixed distance from the edge of your board.
Does Kreg rip cut work with any circular saw?
The Kreg Rip-Cut is designed to work with standard full size 7 1/4″ corded circular saws.
Can you add a laser guide to a circular saw?
If you’ve seen those laser cutting guides on miter saws and wonder if you can add one to your old saw, take heart. It’s possible, and not terribly expensive. The guide fits alongside the blade, replacing the outer washer.
Can you use a DeWalt circular saw on a track?
The DWS5022 is a reversible 1.5 metre track for use with the DWS520 plunge saws, as well as other DeWalt circular saws and routers.
Is it a guardrail or guide rail?
According to the US Federal Highway Administration, “The terms guardrail and guiderail are synonymous, and are used in different regions around the country.” Guide rail and guard rail are intended to steer and “guide” vehicles back onto the road.
How do you cut a long length of wood with a circular saw?
Slide the saw’s shoe against the circular saw rip guide to rip the plywood. To ensure a straight cut, press the saw firmly against the straightedge as you push it along. Clamp a perfectly straight board or metal straightedge to a sheet of plywood to make cabinet-quality straight cuts.
Can a circular saw cut a 4×4?
Circular Saw. A circular saw is one of the best means of cutting a 4×4 post. Most people own a circular saw, its portability makes it easy to cut 4x4s from the ground, and they can make precision cuts by using a relatively simple trick.
Can you cut wet wood with a circular saw?
If you’re cutting wet wood set the depth so that the entire gap between the teeth is clear of the board you’re cutting. This will stop your saw and cut line from getting clogged with wet saw dust.
Can a 5 1/2 inch circular saw cut a 2×4?
The Ryobi cicular saw is a 5.5″ saw, and it can cut a 2×4, just barely.
