The categories generally differ in motor orientation and design, weight, torque, and RPMs. Perhaps most significantly, a worm drive saw was traditionally left-side blade and a sidewinder positioned itself with a right-side blade. There are a few things to consider that aren’t immediately evident in the left side vs right side circular saw blade conversation. If you don’t understand what we’re talking about, imagine cutting a thin strip off a sheet of plywood with a blade right saw.
From what I’ve seen these past few years, corded circular saws are mainly right-handed saws. My best guess is that Dewalt was aiming for this full-size 7-1/4″ cordless circular saw to have a similar feel to full-size corded circular saws. While a lot of righties prefer the greater cut line visibility of left-handed saws, corded circular saw users are used to the feel of right-handed saws.
Most of these variables are fairly easy to understand – things like corded or cordless circular saws for example – but the difference between saws with blades on the left and those with blades on the right is not so straightforward. Some circular saws have their blades on the left side, and some have their blades on the right side – and all worm drive saws have the blade on the left. With a left-bladed saw to use the saw with two hands, you need to cross the blade with one of your hands.
Left-handers often face challenges when operating a corded circular saw on the right side of their body and they can find it difficult to cut and guide materials with a right-handed circular saw. Left-handers often find they have better luck with a Worm Drive circular saw because those typically have the blade mounted on the left hand side. While using a circular saw is a different experience for right and left-handers, using a left-handed drill bit has nothing to do with the handedness of the user.
Before you know why cordless saws are left-handed, it is better to learn their differences from right-handed ones. Right-Handed Circular SawA right-handed circular saw has the blade on the right side and the motor on the left. Left-Handed Circular SawCompared to the right-handed saw, the design of the left-handed circular saw is the exact opposite of course-the blade is on the left side and the motor on your right side.
circular saw left vs right Related Question:
Should circular saw blade be on left or right?
Blade-left for the right-handed user makes the sight/cut line readily visible with the typical one-handed operation. Many tradesmen will hold or stabilize the material with the left hand while operating the saw with the right hand.
Are there right and left circular saws?
From what I’ve seen these past few years, corded circular saws are mainly right-handed saws. There are some brands, such as Milwaukee, that offer both right- and left-handed saws. Worm drive saws are typically left-handed. Cordless circular saws are typically left-handed as well.
Why are most circular saws left-handed?
The placement of the cordless saw blade, on the left side, gives you a clearer line of sight when you cut. The reason for this is because the main bulk of your circular saw is not blocking your view. Cordless circular left-handed saws provide you better movability.
Can a right-handed person use a left-handed circular saw?
Bosch 15 amp Corded Circular Saw It’s compact, which will give you the best line of sight you can get. It’s the best circular saw for left-handers. Interestingly, even with the left-handed design, the handle is placed so that right-handed users will be able to operate the saw safely.
Which way do the teeth face on a circular saw?
The teeth should be cutting UPWARDS, in a clock-wise direction. You’ll also notice that when your blade is installed correctly, the teeth will be pointing upward. Remember: circular saws (as most saws) cut on the upward stroke.
Does Dewalt have a left-handed circular saw?
This 7 1/4″ saw is just a cordless version of the corded right side sidewinder. And Dewalt makes a left side blade circular saw that is basically a cordless worm drive if you need that bid of a saw to have the blade on the left side. 2 of 2 found this helpful.
What is the benefit of a rear handle circular saw?
Because of the placement of the motor, Rear Handle Circular Saws get a heck of a lot more torque than a standard Sidewinder Circ Saw. Sidewinders get more RPM’s, but the torque and power beats speed when you’re cutting into hardwoods with a Worm Drive (rear handle) saw.
What is a circular saw good for?
A circular saw is an essential DIY tool that uses a moving blade to make straight, accurate cuts. While circular saws are traditionally used to cut 2x4s, plywood, and other lumber, they can be outfitted with different blades to cut masonry, metal, and other materials.
Why do circular saws cut upwards?
The teeth of circular saw blades are intended to cut upwards into the material from below and this is for safety purposes. It is important that you should not spin them in a different direction just like you spin a table saw blade.
Can you put a circular saw blade on backwards?
When cutting vinyl siding with a circular saw, install a fine-toothed blade backwards on the saw for a smoother, cleaner cut, especially in cold weather (when the material is brittle).
Can a left-handed person use a chainsaw?
Unfortunately, there is no such thing as a left-handed chain saw. Left-handed persons should hold the chain saw in the same manner as a right-handed person would hold it. Your body should be in such a position that you have control over your balance. Avoid leaning over the chain saw when operating.
Why is it called a worm drive saw?
What is a Worm drive saw? A worm drive saw has the motor attached at the rear. This is very powerful and its power is driven through two gears each set at 90 degrees. This setting implies that the engine produces more torque but less Rotation Per Minute (RPM) of about 4,500.
Whats the difference between a circular saw and a skill saw?
Circular Saws vs. All skill saws are circular saws. They all have circular blades that spin rapidly to bite through wood. However, not all skill saws are circular saws. Circular saws can be gas-powered, have sidewinder or hypoid designs, or even be fixed to radial arms, which skill saws commonly aren’t.
What’s the difference between worm drive and Sidewinder?
While the function of both types of saws are the same, the saws actually have more differences than similarities. Motor Position – As we discussed above, a Worm Drive has the motor behind the blade (behind the center point of the blade). A Sidewinder has it inline with the center of the blade.
What is a worm drive on a circular saw?
Worm drive saws have the motor at the rear of the power tool, with gears oriented at 45° angles. The blade speed is slower but the torque is improved. A heavier and longer saw, a wormdrive model will usually have the blade on the left side. Worm Drive Circular Saws Torque Durability.
