The categories generally differ in motor orientation and design, weight, torque, and RPMs. Perhaps most significantly, a worm drive saw was traditionally left-side blade and a sidewinder positioned itself with a right-side blade. There are a few things to consider that aren’t immediately evident in the left side vs right side circular saw blade conversation. If you don’t understand what we’re talking about, imagine cutting a thin strip off a sheet of plywood with a blade right saw.
From what I’ve seen these past few years, corded circular saws are mainly right-handed saws. My best guess is that Dewalt was aiming for this full-size 7-1/4″ cordless circular saw to have a similar feel to full-size corded circular saws. While a lot of righties prefer the greater cut line visibility of left-handed saws, corded circular saw users are used to the feel of right-handed saws.
Most of these variables are fairly easy to understand – things like corded or cordless circular saws for example – but the difference between saws with blades on the left and those with blades on the right is not so straightforward. Some circular saws have their blades on the left side, and some have their blades on the right side – and all worm drive saws have the blade on the left. With a left-bladed saw to use the saw with two hands, you need to cross the blade with one of your hands.
Left-handers often face challenges when operating a corded circular saw on the right side of their body and they can find it difficult to cut and guide materials with a right-handed circular saw. Left-handers often find they have better luck with a Worm Drive circular saw because those typically have the blade mounted on the left hand side. While using a circular saw is a different experience for right and left-handers, using a left-handed drill bit has nothing to do with the handedness of the user.
Before you know why cordless saws are left-handed, it is better to learn their differences from right-handed ones. Right-Handed Circular SawA right-handed circular saw has the blade on the right side and the motor on the left. Left-Handed Circular SawCompared to the right-handed saw, the design of the left-handed circular saw is the exact opposite of course-the blade is on the left side and the motor on your right side.
circular saw right handed vs left handed Related Question:
Are there right-handed and left-handed circular saws?
From what I’ve seen these past few years, corded circular saws are mainly right-handed saws. There are some brands, such as Milwaukee, that offer both right- and left-handed saws. Worm drive saws are typically left-handed. Cordless circular saws are typically left-handed as well.
Why are most circular saws left-handed?
The placement of the cordless saw blade, on the left side, gives you a clearer line of sight when you cut. The reason for this is because the main bulk of your circular saw is not blocking your view. Cordless circular left-handed saws provide you better movability.
Does Dewalt make a left-handed circular saw?
Dewalt Left Handed Circular Saw Dewalt left-handed circular saw, corded, has a powerful 460 MWO, 5,150 RPM motor that provides more than enough power and speed to make difficult cuts without a problem. The material of the base plate is Magnesium which makes it strong and lightweight.
Does Dewalt have a left-handed circular saw?
This 7 1/4″ saw is just a cordless version of the corded right side sidewinder. And Dewalt makes a left side blade circular saw that is basically a cordless worm drive if you need that bid of a saw to have the blade on the left side. 2 of 2 found this helpful.
What is the benefit of a rear handle circular saw?
Because of the placement of the motor, Rear Handle Circular Saws get a heck of a lot more torque than a standard Sidewinder Circ Saw. Sidewinders get more RPM’s, but the torque and power beats speed when you’re cutting into hardwoods with a Worm Drive (rear handle) saw.
Which way should blade face on circular saw?
For blade-right models, the correct circular saw blade direction is usually with the label side out. For saws that have the blade on the left, it typically installs with the “ugly” side out. It’s not a hard, fast rule, though. You should always double-check.
Can a left-handed person use a chainsaw?
Unfortunately, there is no such thing as a left-handed chain saw. Left-handed persons should hold the chain saw in the same manner as a right-handed person would hold it. Your body should be in such a position that you have control over your balance. Avoid leaning over the chain saw when operating.
Why are most circular saw right blade?
Blade-Right for the Right-Hander Using the saw this way will place the motor weight over the waste edge when you cut from the end-side of a board or sheet. This means the saw eventually cuts off its own support. Most users have no trouble holding the saw steady, but this can result in bind-ups.
Are worm drive saws better?
Worm drive saws offer more durability and power because they have larger teeth which have a more loading capacity than regular circular saws. This feature enables the user to handle loads with high shock. It can handle tougher projects because it has great muscle to pitch cut.
Whats the difference between a circular saw and a skill saw?
Circular Saws vs. All skill saws are circular saws. They all have circular blades that spin rapidly to bite through wood. However, not all skill saws are circular saws. Circular saws can be gas-powered, have sidewinder or hypoid designs, or even be fixed to radial arms, which skill saws commonly aren’t.
Which side of the line do you cut with a circular saw?
When appearance matters, make cuts with the good side facing down, as circular saws can splinter the wood on the top side. Making your cut line on masking tape can reduce splintering. Start over if you see that you’ve veered off from the cut line instead of trying to curve your way back on track.
What’s the difference between worm drive and Sidewinder?
While the function of both types of saws are the same, the saws actually have more differences than similarities. Motor Position – As we discussed above, a Worm Drive has the motor behind the blade (behind the center point of the blade). A Sidewinder has it inline with the center of the blade.
What does a worm drive saw do?
Advantages of a Worm Drive Circular Saw The longer distance between the handle and the blade extends your reach while making a cut, which is helpful for crosscutting sheet goods. A worm drive also has larger gear teeth with more load-carrying capacity than a direct drive, which provides more power but also adds weight.
Whats the difference between Sidewinder and worm drive?
Sidewinder vs Worm Drive Torque A worm drive saw has larger gear teeth with more load-carrying capacity than a sidewinder, offering more power and durability. It also allows the saw to handle higher shock loads. It has more muscle to plunge cut and handle tougher jobs.
Why does my circular saw burn the wood?
A dull blade will make it hard to cut quickly, and the slower the feed rate of the saw, the more friction against the wood and the greater the likelihood of scorch marks. Pushing the stock through the saw too slowly is a common cause of saw blade burn. Sometimes a blade that feels dull might only be dirty.
