circular saw screwfix Related Question:
What should I look for when buying a circular saw?
The main things you should be looking out for when choosing a circular saw are cutting capacity, cutting depth and bevels. The capacity and depth of your cut with a circular saw is based on the size of the saw’s blade.
What is the most versatile saw for home use?
The table saw, in my opinion, is the most versatile tool in the shop and should be your first major purchase. Next up is the Miter Saw. The miter saw does one thing but it does it really well. The Miter saw will cross cut wood better and faster than pretty much any other tool.
Are cheap circular saws any good?
Best Budget: Skil 5180-01 Circular Saw The Skil 5180-01 is an excellent budget option since it will give you reliable cutting power and durability at an affordable price. At just 7.2 pounds, it is a couple pounds lighter than the other top picks.
What’s the difference between a skill saw and a circular saw?
Circular Saws vs. All skill saws are circular saws. They all have circular blades that spin rapidly to bite through wood. However, not all skill saws are circular saws. Circular saws can be gas-powered, have sidewinder or hypoid designs, or even be fixed to radial arms, which skill saws commonly aren’t.
What is the minimum cut with a circular saw?
The circular saw can cut any depth from 0 to about 2 3/8″. This is awesome. But, to get the best quality cut and reduce the possibility of kickback, you’ll want to set the proper cut depth for your material. The blade should only project about 1/4 -1/2″ below the bottom of the material.
Can I use a jigsaw instead of a circular saw?
Although a jigsaw can be used for most of the tasks that a circular saw can perform, including straight cuts and cuts on a tilt, the jigsaw uses that really take advantage of the tool’s qualities are jobs such as kitchen fitting and joinery, with their frequent need for complex cuts.
Can you cut wet wood with a circular saw?
If you’re cutting wet wood set the depth so that the entire gap between the teeth is clear of the board you’re cutting. This will stop your saw and cut line from getting clogged with wet saw dust.
How do I know what size circular saw to get?
Circular Saw Features Blade capacity determines the maximum depth of cut a saw can achieve. The larger the blade, the deeper the cut. The most common blade diameter is 7-1/4 inches. Most saws with blade capacities of 6 inches or more can cut through 2-inch dimensional lumber at a 45-degree angle in a single pass.
What saw should I buy first?
A jigsaw is great for cutting curves and shapes, and it can also be used with a guide to make straight cuts, which is why this is the first power saw you should own. Unless you plan to rip long sheets of plywood, a jigsaw is preferable over a circular saw.
Can I put a metal cutting blade on my circular saw?
Only blades and discs specified for cutting metal should be used. These professional circular saw blades are perfect for cutting through aluminium, copper, lead and other non-ferrous metals; while these diamond cutting discs will make light work of cutting through stainless steel.
What is a worm drive saw?
What is a Worm drive saw? A worm drive saw has the motor attached at the rear. This is very powerful and its power is driven through two gears each set at 90 degrees. This setting implies that the engine produces more torque but less Rotation Per Minute (RPM) of about 4,500.
Which saw works best for demolition and remove old boards while making rough cuts?
A reciprocating saw–also known as a “recip saw” or “hognose saw”–was invented by the Milwaukee Electric Tool Corporation in the 1950s and branded Sawzall, is used mainly for demolition.
Are Makita circular saws good?
Best Hypoid Circular Saw Makita, a reliable name in power tools, is one of the few manufacturers offering hypoid saws. With its lightweight magnesium construction, the Makita 5377-MG Circular Saw weighs only 13 pounds, light for a geared saw.
What saw is used to cut across the grain of wood?
If you’re cutting across the wood grain, a crosscut saw is the best tool. Its teeth angle backward with a beveled edge while cutting on both the push and pull strokes for a clean and accurate notch. Crosscuts can cut logs perpendicular to the grain, or you can use it in tandem with a saw hook.
Which saw is used to cut along the grain?
A crosscut saw (thwart saw) is any saw designed for cutting wood perpendicular to (across) the wood grain. Crosscut saws may be small or large, with small teeth close together for fine work like woodworking or large for coarse work like log bucking, and can be a hand tool or power tool.
