Unlike a chainsaw with its long arm and chain, a circular saw features a circular metal blade with sharp teeth for cutting. A chainsaw is generally intended for making bigger and rougher cuts, whereas a circular saw is intended for much smaller and finer cuts and a cleaner finish. A chainsaw can be considered a lumber-working tool, whereas a circular saw is a carpentry tool.
Loggers usually have their own preferences when making firewood and are faithful to a specific type of firewood processor they are used to having; a chain saw machine or a circular saw machine. Key benefits of a circular saw processor The circular saw blades are fast, maintenance-free and generate a small amount of sawdust. Key benefits of a chainsaw processor The chain saw offers a greater cutting diameter compared with the hard-metal blade machines in the same size category.
We recently talked about the many options we have for firewood processors in our blog, Firewood Processing to Simplify your Workload. You may have noticed that we stock Posch brand firewood processors and that some of our processors use saw blades instead of chainsaws, the other popular choice in the market. With a circular saw firewood processor, the saw blade is large and always sharp. Blades can be changed out in 5 minutes if one gets dull, and sharpening goes for about $150+GST. But a good saw blade like one from our Posch saw blade collection can easily process 700m3 before needing to be changed out, and sometimes as much as 1000m3.
circular saw vs chainsaw Related Question:
Can I use a circular saw to cut tree branches?
While its possible to use a circular saw to cut a tree branch I wouldn’t advise it. They’re not meant for trimming trees and because of that, I won’t be adding it to list. Same goes for the other saws designed for something other than cutting trees.
What is the difference between saw and chainsaw?
is that saw is a tool with a toothed blade used for cutting hard substances, in particular wood or metal or saw can be (obsolete) something spoken; speech, discourse while chainsaw is a saw that has a power driven and fast revolving chain of metal teeth, usually used to cut trees.
Is a circular saw good for cutting wood?
A circular saw is a utilitarian workhorse and a useful addition to the toolkit of DIYers. Its most common function is to make cuts in a straight line on pieces of lumber.
What are the advantages of using circular saws?
Among many advantages of the circular saw is its simple efficiency. Unlike the reciprocating saw, which cuts only half the time (each cutting stroke is followed by a return stroke), the circular saw is ready to cut whenever its blade is in motion.
Can you use a circular saw on tree roots?
I use a circular saw set at 15 degrees and keep crisscrossing the stump at the blade depth of three inches and the stump just falls apart in small wood squares. Cover with heavy 6 mil plastic and re-cover with earth.
Can a pole saw cut a tree?
Cordless Pole Saws A great choice if you need the ability to reach longer distances or higher trees. In terms of cutting ability, this type of pole saw will work best on tree branches between three and eight inches in diameter. Require very little maintenance.
Can I use a pole saw like a chainsaw?
A pole saw is long, like a chainsaw on a stick, and is mainly used to cut and trim at places you can not reach with your chainsaw.
Can a pole saw cut down a tree?
Yes, a pole saw could cut down a small tree that is less than 8 inches in diameter. However, it’s important to make sure it’s used safely and in accordance with the manual. It would be much easier to use a chainsaw designed for thicker branches. A pole saw does have its purpose when cutting down trees.
Is it okay to cut wet wood with a circular saw?
If you’re cutting wet wood set the depth so that the entire gap between the teeth is clear of the board you’re cutting. This will stop your saw and cut line from getting clogged with wet saw dust.
Why won’t my circular saw cut all the way through?
Here are some reasons your circular saw keeps stopping: Make sure your work piece is properly supported so it doesn’t pinch the blade which could also cause kickback in addition to stopping. Damaged, warped, loose or dull blade. Motor malfunctioning or overheating. Cable problems like frayed cord or weak connection.
What is the disadvantage of circular saw?
Compared to jigsaws, the main disadvantage of circular saws is that they can’t cut curves – they are designed to cut in straight lines only. The blades for circular saws are more expensive – although, as we mentioned, they last longer so won’t need to be replaced as often. They are big, noisy tools.
What were the drawback of circular saws?
Disadvantages of the circular saw: The main disadvantage of the disc saw is that it is more dangerous than other power saws such as the jigsaw or the saber saw. Another disadvantage is that the disc saw only serves to make straight cuts, so it is not as versatile as a Jig Saw.
What is the correct depth setting for a portable circular saw?
Check the saw for proper blade rotation. Set the depth of the blade, while the saw is unplugged, and lock it at a depth so that the lowest tooth does not extend more than about 0.3 cm (1/8″) beneath the wood.
How do you cut thick tree branches?
For a thicker branch, use the three-cut rule: about 10-15 inches up from the branch collar, cut halfway into the bottom of the branch. Next, move a couple inches up past that cut, and cut into the top of the branch, letting it fall. Lastly, make the final cut just past the branch collar.
What is the best saw choice for cutting and pruning trees?
As a general rule, choose a pruning saw with a blade that’s double the diameter of the branches you’ll be cutting. For example, choose a saw with at least a 10-inch blade to cut branches up to 5 inches in diameter.
