Notes: Members cut-off dates are set at the 25th of the month before the month of despatch. If you join us on the 24th September your first issue will be the issue due the following month ie. If you join us on the 26th September then your first issue will be the issue due in December.
There is a lot of debate over which saw is better for carpentry projects – the compact circular saw or the regular circular saw. Compact circular saws are ideal for people who have smaller projects around the house or need an easily portable saw. One of the main benefits of a compact saw is that it’s more portable than a circular saw.
Trim saw is a bit less powerful than the standard circular saw but can still be used for material management and cutting long straight lines in cutting flooring material, ripping off the sheet stock along with reducing the stock used for cabinetry and other lighter furniture. Trim saws are very light and the wood worker working with a trim saw generally doesn’t need any assistance as he functions the trim saw with one hand and holds the stock in place with the other. Well both the saws are identically different when it comes to cutting stock, the circular saw may seem a bit over the top if used in place of a trim saw and the trim saw wouldn’t even make an inch past the wood.
Bring the saw up to full speed, lift the guard, and slowly push the body of the saw down to start the cut. TIP: Make sure to start back far enough so that you only push the saw forward; never drag a spinning saw back. If a board is too wide for the saw shoe to hang over the edge during a rip cut, hold a narrow scrap of wood between thumb and forefinger, bracing your finger along the edge of the board, and butt the saw shoe against the edge of the wood scrap as you push both along the board.
circular saw vs mini circular saw Related Question:
Is a mini circular saw useful?
Is a mini circular saw required for professional woodworking? The answer is simple: no. A normal circle saw has higher cutting depth, power, and can perform all of the tasks that a small circular saw can. But compact circular saws are a good compromise, providing power, convenience, and comfort.
Can a mini circular saw cut a 2×4?
The new WORXSAW new Compact Circular Saw is capable of cutting a 2×4 in a single pass. The compact circular saw features a 4-1/2 in. blade that is up to 50 percent lighter than a full-size 7-1/4 in. circular saw.
How deep can a mini circular saw cut?
How deep can a 7.25-inch compact circular saw cut? A compact circular saw designed for a 7.25-inch blade can cut to a maximum depth of 2.5 inches.
What is the difference between a cut off saw and a circular saw?
Although there are many specific types of cut-off saws, they are all circular saws designed to cross cut stock at exact lengths and angles. The following are some of the common cut-off saws used today. A miter saw is a versatile circular power saw mounted on a hinged frame and designed to make accurate angle cuts.
Does Rotorazer cut tile?
Yes. The Diamond Blade is ideal for ceramic tile, grout, concrete, masonry, marble, and stone. Rotorazer is designed for DIY, home hobbyist-type projects requiring precision, detail-oriented cutting.
What size circular saw Do I need to cut 2×4?
You need a minimum 5-3/8 inch size circular saw blade to cut a 2X4 at a 90 degree angle in one cut which is a crosscut. If you want to cut a 45 degree bevel with this size circular saw it will take 2 cuts. You could go with a 7-1/4inch or 10 inch blade to avoid making multiple cuts with the 45 degree bevel angle.
Can a 5.5 inch circular saw cut a 2×4?
The Ryobi cicular saw is a 5.5″ saw, and it can cut a 2×4, just barely.
Can I cut a 4×6 with a circular saw?
However, a regular circular saw with a 7 1/4-inch diameter blade will only cut to a depth of 2 1/4 inches. Cutting on all four sides still leaves roughly an inch of uncut wood in the middle of the post. This is alleviated with either a handsaw, or reciprocating saw.
Can Rotorazer cut granite?
Can it cut granite? Answer: With over 3400 RPM, the Rotorazer™ can cut a wide range of materials, simply by choosing the right blade. Three razor-sharp blades come with the unit.
Does a homeowner need a circular saw?
Most new homeowners will want a power saw of some kind, and a circular saw is a good starting point— can handle far more cuts than you’d think.
Which saw should I buy first?
A jigsaw is great for cutting curves and shapes, and it can also be used with a guide to make straight cuts, which is why this is the first power saw you should own. Unless you plan to rip long sheets of plywood, a jigsaw is preferable over a circular saw.
Can I use a jigsaw instead of a circular saw?
Although a jigsaw can be used for most of the tasks that a circular saw can perform, including straight cuts and cuts on a tilt, the jigsaw uses that really take advantage of the tool’s qualities are jobs such as kitchen fitting and joinery, with their frequent need for complex cuts.
Will the Rotorazer cut a brick?
The Rotorazer Platinum Circular Saw is more dynamic when it comes to cutting different materials. These include sheet metal, ceramic tile, drywall, plywood, laminated flooring, hardwood, plastic, marble, PVC, pegboard, grout, masonry, steel, carpet, and particle boards.
How deep can the Rotorazer cut?
Rotorazer’s cutting depth is ½ inch and Rotorazer Platinum’s cutting depth is 1 inch. see less With over 3400 RPMs, the Rotorazer™ can cut a wide range of materials, simply by choosing the right blade. Three razor-sharp blades come with the unit.
Who manufactures the Rotorazer saw?
One of them is the Rotorazer saw. Rotorazer saw is a product of Ideal Living LLC; a company that markets products that help consumers achieve comfort in their daily activities. They have been in operation since 1993 and their products are of good quality.
