This XU1 1200W Circular Saw is designed to make clean cuts through a variety of timbers around the home. Perform a range cuts including, straight cuts, 0-45° bevel cuts and attaching the included guide you can complete quick rip cuts. The 24 tooth Tungsten Carbide Tipped blade provides durability and an extended blade life.
This XU1 1200W Circular Saw is designed to make clean cuts through a variety of timbers around the home. Perform a range cuts including, straight cuts, 0-45° bevel cuts and attaching the included guide you can complete quick rip cuts. The 24 tooth Tungsten Carbide Tipped blade provides durability and an extended blade life.
10th May 2011, 02:16 PM. My brother bought the XU1 hammer drill. 10th May 2011, 09:41 PM. XU1 hammer drill is about their best product, in my experience anyway :). Handyjack. 10th May 2011, 10:08 PM. My brother bought the XU1 hammer drill.
circular saw xcort Related Question:
What are the different sizes of circular saws?
Cordless saws typically range in size from 5-3/8 to 6-1/2 inches. Corded circular saws don’t depend on batteries for power and are better suited for tough cutting jobs, such as masonry, steel and continuous woodcutting. Corded saws are available in many sizes; the most common is 7-1/4 inches.
What are the different types of blades on a circular saw?
Generally speaking there are four major categories of circular saw blades. They are: Rip Blades, Crosscut, Combination and Specialty blades. Ripping saw blades are designed primarily to achieve a smooth, clean and safe cut when ripping wood or cutting in the same direction as the wood grain.
What is circular saw binding?
A circular saw binds because of failure to ensure proper blade depth; setting the blade too deep presents a danger because more blade surface is exposed while cutting than a properly set blade. When the saw is too deep, kickback and binding will be inevitable.
What is the biggest size circular saw?
Large circular saws range from 8 1/4 inches to over 10 1/4 inches by blade size. These bigger saws are beasts, relying on powerful motors to cut through 2-inch thick material with ease. They are heavy and intimidating.
How do I know what size circular saw to buy?
The Size: Circular Saw Blade Diameter Most woodworkers identify a circular saw by the size of the saw blade it uses. Hobbyists should consider one of these sizes: 6.5-inch: While there are smaller saws, this is the minimum you should go for in woodworking. Your cutting depth will be about 2.25-inches.
What type of blade is best for circular saw?
Mostly, a 24-tooth circular saw blade is preferred by many people, especially if you have to cross-cut lumber and sheet materials. The 24-tooth blade is good enough for you if the diameter is 7¼”. However, as the diameter increases, you should also consider looking for circular saw blades with more teeth.
Is more teeth on a saw blade better?
Blades with more teeth yield a smoother cut. Blades with fewer teeth remove material faster, but tend to produce a rougher cut with more “tearout”. More teeth means you will need to use a slower feed rate.
How many teeth do I need on my circular saw blade?
Number of Teeth Generally, blades with more teeth will provide a smoother, finer cut whereas blades with fewer teeth will provide a rougher cut. The benefit of fewer teeth is faster cutting and a lower price. For most construction work, a 24-tooth general use blade is sufficient.
Why does my circular saw keeps binding?
Proper blade depth Setting the blade too deep causes a few problems. First, it’s more dangerous than a correctly set blade because more blade is exposed while cutting. In addition, the saw is more likely to bind and kick back if the blade is too deep. Safety issues aside, blades cut more efficiently when properly set.
What makes a circular saw kickback?
Kickback happens when the saw blade binds or stalls suddenly in the wood and the saw gets driven back toward you. So the key to preventing this is to make sure your blade doesn’t bind in the wood.
Why is my circular saw sticking?
Most of the time, a circular saw keeps stopping because the blade gets stuck in the wood or material. This is due to the blade not being powerful enough to get through the material. It could also be because the blade is damaged or the motor is malfunctioning.
How deep can a 12 inch circular saw cut?
To sum up, a standard circular saw can offer a cutting depth of 2.5 inches as the maximum, but you can adjust the depth to match your requirements. It’s easy by moving the blade up and down to align against the material before starting to cut.
Do they make a 12 inch circular saw?
Amazon.com: Power Circular Saws – 12 Inch / Power Circular Saws / Power Saws: Tools & Home Improvement.
What size circular saw will cut a 4×4?
Cutting a 4×4 with a Circular Saw – Guide If you need to cut a 4×4 post, then the ideal tool is a large 12” miter saw. This saw has the blade diameter needed to chop through a 4×4 in a single pass, so if this is an option for you it’s the way to go.
Can a 6 1 2 circular saw cut a 4×4?
Like miter saws that measure less than 12 inches, a circular saw’s 6.5-inch or 7.25-inch blade will not cut cleanly through a 4×4. The maximum depth of most circular saws is just 2.5 inches. This means you’ll need to make two cuts. Having to make two cuts makes it easier to set up the cut.
