circular saw youtube Related Question:
How do you cut wood with a circular saw without splintering?
Tape the wood. Run a piece of making tape over the wood before drawing the cut-line and then cut through the masking tape. Taping holds the surfaces of the wood together, helping to prevent splintering.
What can you use a circular saw for?
With the right blade, a circular saw can be used to cut framing lumber, sheet goods, roofing, metal, masonry, and more. A powerful saw can be a major time-saver during demolition as well. Once you get used to using your circular saw, you can even use it to cut curves, like I did on my backyard deck.
Why do circular saws kick back?
Overheating a saw blade can cause it to warp and result in a kickback. Buildup of sap on the blades, insufficient set, dullness and unguided cuts, can all cause an overheated blade and kickback. Never set a blade deeper than is required to cut the work piece 1/8 in. to 1/4 in.
Can I use a jigsaw instead of a circular saw?
Although a jigsaw can be used for most of the tasks that a circular saw can perform, including straight cuts and cuts on a tilt, the jigsaw uses that really take advantage of the tool’s qualities are jobs such as kitchen fitting and joinery, with their frequent need for complex cuts.
What is the space between two protruding teeth on a saw blade called?
Gullet – The gullet refers to the space between each tooth on the blade. A wider gullet produces a bigger chip of material cut.
How do you prevent tearing when cutting wood?
Another thing you can do to prevent tearout involves our old friend blue tape. Just run a strip of blue masking tape along the cut line on the side that you anticipate tear out. The tape helps to hold the fibers in place during the cut, and usually the result is a clean crisp line.
What is the minimum cut with a circular saw?
The circular saw can cut any depth from 0 to about 2 3/8″. This is awesome. But, to get the best quality cut and reduce the possibility of kickback, you’ll want to set the proper cut depth for your material. The blade should only project about 1/4 -1/2″ below the bottom of the material.
How do you use a circular saw without a table?
Fit your circular saw with an edge guide. Set the depth of the blade accurately enough for it to go through the wood and not cut under the surface. Place the guide on base of the circular saw lines and markings you made earlier on the wood. Ensure that the saw is free to move, and the power cord is not entangled.
Can you cut logs with a circular saw?
Circular saws are great for cutting plywood and 2x’s, but you can also cut everything from logs to concrete to steel beams with the right blade or the right type of saw.
How can you tell if circular saw kickback might happen?
Kickback happens when the saw blade binds or stalls suddenly in the wood and the saw gets driven back toward you. So the key to preventing this is to make sure your blade doesn’t bind in the wood.
Can a circular saw blade break?
Making sure your saw blade is working properly is the best way to reduce downtime and increase production. There are many common causes that can cause blade failure from blade selection to cutting speeds, feed rates and improper break-in, to maintenance problems and more.
Is a table saw safer than a circular saw?
Circular saws are generally more affordable than table saws, and they are also much safer. While it is perfectly possible to cause a serious injury with a circular saw, they are still much safer than table saws.
What is the safest saw?
TYPE OF SAW: Jigsaw Considered one of the safer power saws, the jigsaw features a large flat base called a “shoe,” which rests flat on the surface of the material you’re cutting and surrounds the blade and offers some protection.
Why does my circular saw burn the wood?
A dull blade will make it hard to cut quickly, and the slower the feed rate of the saw, the more friction against the wood and the greater the likelihood of scorch marks. Pushing the stock through the saw too slowly is a common cause of saw blade burn. Sometimes a blade that feels dull might only be dirty.
Which saw should I buy first?
A jigsaw is great for cutting curves and shapes, and it can also be used with a guide to make straight cuts, which is why this is the first power saw you should own. Unless you plan to rip long sheets of plywood, a jigsaw is preferable over a circular saw.
