My experience is that a circular saw is larger heavier and more robust, but produces rougher lumber and has more waste. The band saw also runs off a small engine, where the circular saw runs off a larger diesel. Pulling a log through a saw means you’re also placing boards and slabs to the opposite side of the saw, without having to pull it off the top of a log.
The log dogs that came with the mill hold the log steady, and the mill puts very little pressure on the log. From contributor J: Grade sawing on a swing mill is simple and realistic as *three* faces are show! Half logs can easily be achieved providing that the logs are 20″ and under. The only reason I said I would buy a swing blade is because of the big logs I can’t get on my mill.
Currently, you have four common options for a mill such as portable bandsaw, circular sawmills portable, or stationary, large stationary band sawmills and chainsaw mill. If you are aiming for a hobby, A suggested choice would be to buy a chainsaw mill, or a portable band saw sawmill for a small business. Tool to Use: You have four main options for this: circular sawmill, Large stationary band mill, portable band sawmill, and chainsaw sawmill.
Circular saw machines, or cold saws, use blades that are thicker and more rigid compared to band saw blades, to reduce vibration and provide a better finish. “Band saw machines are versatile and cut larger cross sections than circular saw machines, which are limited to a 80” blade diameter. If a job requires thinner cuts, the kerf loss will help determine if a band saw machine is a better option; however, compared to cutting rates, a carbide circular saw machine is hard to beat.
I’ve started this thread in response to a request from phill-nz who was wondering why the bandsaw is not well received in New Zealand and asked if I could identify the pros and cons for each type of saw. The two types are the horizontal bandsaw and the circular swingblade saw. Typically the style of mill for the bandsaw would be the Woodmizer and for the swingsaw the Lucas.
Age-old sawmill sites evolved in their established location, so you’ll still find sawmill sites around water. Some mills employ water-jet blasters instead. Bark waste is an important by-product, adding value for the sawmill as landscaping mulch or fuel for the sawmill’s kilns. Is York Saw and Knife Co, Inc. For over 100 years, we’ve supplied the American sawmill industry with top quality saw blades and other supplies to keep sawmills sharp and efficient.
circular vs bandsaw mill Related Question:
Is a bandsaw mill worth it?
A portable sawmill can be worth the investment. It can provide a source of wood for your own projects and give you a side business. For a source of lumber, as well as a profitable business, a portable sawmill can be a key piece of equipment on your farm.
What is the difference between a circular saw and a band saw?
Circular saw machines, or cold saws, use blades that are thicker and more rigid compared to band saw blades, to reduce vibration and provide a better finish. They require more power consumption and a rigid machine structure because they cut wider slots.
Is saw milling profitable?
It’s true that owning a sawmill can be a very lucrative business venture, and in the right circumstances it is not only possible but very likely to earn you a significant profit on a regular basis. However, it’s worth keeping in mind that building a business with only profit in mind is not sustainable in the long term.
Do dead trees make good lumber?
Yep, it’s worth it. If you sell the wood, you will have to find or create a market. Most that I have sawed has been treated and the bugs killed. Buyers will want to be assured that the wood is bug free.
What is the difference in band saws?
The band saw blades are thicker and more reliable than a scroll saw blade. This makes them faster at cutting but makes the cut a bit more coarse. You can’t make super tight turns, like with a scroll saw, but you can use thick wood, which a scroll saw won’t accommodate.
How much does a miter saw cost?
A basic compound miter saw starts at $100, while miter saws with sliding blades start at $125. Dual-bevel miter saws start at $200, and professional-level miter saws with special features can cost as much as $800.
What is band saw machine?
A bandsaw (also written band saw) is a power saw with a long, sharp blade consisting of a continuous band of toothed metal stretched between two or more wheels to cut material. They are used principally in woodworking, metalworking, and lumbering, but may cut a variety of materials.
What’s the main shortcoming of a bandsaw?
The Disadvantages: A bandsaw is limited to the size pieces you can cut because of the circular blade. With the Speedster Bandsaw and Diamond Laser 3000, the maximum size glass piece is approximately 10 to 12 inches in diameter. 2. It does not take the place of simple cuts.
How important is a bandsaw in a woodshop?
That being said, a quality band saw will do a lot more than just cut curves. They are great for cutting tenons and some smaller rabbets, for ripping small pieces of stock, and for resawing thin strips from larger pieces of wood.
What are 5 general guidelines for using the band saw?
Never push on back of piece with fingers or thumb. Don’t reach across the blade. Make all cuts under power, not while blade is coasting. Never remove guard unless authorized by Technician or WRL Manager.
Can you cut logs with a band saw?
In addition, the blade should be as wide as your band saw will allow and have 2-3 teeth per inch. This way, the blade will cut straight without bogging down. Simple Sled. Before you cancsaw the log into boards you need to create a flat surface to ride on the saw table.
Who profits from high lumber prices?
The five major companies are Georgia-Pacific, Sierra Pacific Industries, Interfor, Weyerhaeuser and West Fraser. West Fraser bought mills across the regions of the U.S., and that company is now valued at $13 billion and its share price has jumped 250 per cent in the past year.
How long should pine dry before milling?
Depending on the thickness of the lumber and where you live, weather and time of the year, it will take anywhere from 6 weeks to 4 months. Most lumber is in the 1” to 2” thickness and the time above applies to thicknesses. Drying cants, timbers, posts will take considerably longer.
Can standing dead trees be used for lumber?
Dead and dying trees can be milled for lumber, but it has to be done within about two years before they rot or become infested with insects.
How much does it cost to mill wood?
The most stable or secure method for pricing for the mill owner is a flat, hourly rate. Rates vary from location to location and range from $65 to $105 per hour plus extra charges for travel, broken blades, etc. Pricing on an hourly basis transfers all of the risk of daily output to the customer.