Buy CO-Z 800W Folding Drywall Sander with Extendable Handle Vacuum & 12 Sanding Discs | Orbital Sander with LED Light Dust Collector | 6 Speed Drywall Power Tool for Woodworking Home Improvement CO-Z 800W Folding Drywall Sander with Extendable Handle Vacuum & 12 Sanding Discs

You can use your orbital sander for any job because it has six speeds that range from 500 to 1800 rpm. This lets you smooth out those rough spots on any rough or bumpy surfaces, so you can finish the job.

This is a mess-free place. 99% of the dust and debris that comes up as you work is sucked away by this CO-Z sander’s built-in vacuum attachment. This keeps your lungs safe and makes clean-up simple thanks to its 800W high-power motor.

ADJUSTABLE HANDLE: The handle is shaped to help you reach high ceilings, and it folds up for easy storage. The 90° adjustable base rim makes short work of corners, edges, and other hard-to-reach places.

All around: When you’re working in a dark place, just turn on the LED strip built into the frame. It’s easy to turn on and off.

There are twelve 9″ sandpaper pads of two different grit sizes to get you started, as well as CO-usual Z’s strong warranty and friendly customer service to make sure you and your sander stay in business for years.

First, the machine does a great job of sanding, and it does it very well. Really, the LED lights help you see the area you are working in. Unit: It’s easy to put together and to use.

The bad thing is that the built-in vacuum doesn’t work well enough to do anything.

To see, I had to shut down the machine and wait for the dust to fall. All of the holes in the sanding disc were lined up with holes on the pad. I made sure that everything was right. It didn’t do anything. Found that there was a gig of peteoleum jelly inside the computers that connect to each othe. That was put there to make it easier for the adjustable shaft to move around on its own. In this case, there was just one big blob that blocked the whole way. There were parts of the problem that I thought were caused by tha. So I cleaned the majority of it and,spread some around the shaft of the bike. Still a little dirty. This is what I came to: I found out that the vacuum didn’t have enough suction to keep up with the sander. I taped the hose from my shop vac to the unit, and it worked great for a long time.

A little heavy when you move it over your head, but it makes quick work of sanding. I think it’s a good idea, but I’d be careful about the dust it will make.

Leave a Reply

Your email address will not be published. Required fields are marked *