A high-quality band saw may be able to meet or exceed performance expectations that previously were achievable only with a circular cold saw. If you can cut pieces in layers, then a band saw can compete nicely with the volume throughput of a circular cold saw. In comparing a fully automatic band saw to a fully automatic circular cold saw, generally speaking a band saw costs significantly less than a circular cold saw.
A band saw gives a larger cutting capacity, whereas a cold saw limits your cutting capacity. While the initial price of a cold saw blade may be higher than a band saw blade, it’s important to remember that a cold saw blade can be re-sharpened. At SEPCO, we provide a band saw cutting and precision cold cutting saws that are both accurate and fast.
10-29-2009, 08:58 PM #1 Cold Saw Vs. Band Saw Right now the only saw I have is a chop saw and that thing sucks. Not true if the cold saw is semi auto type…which is the only type to buy really…a manual cold saw is a silly choice, unless it’s a non ferrous type, in which case it cuts so fast that manual use is ok. A manual cold saw uses round, HSS blades, that can be resharpened over and over and over again- I have cold saw blades that are ten years old.
cold saw vs band saw Related Question:
How accurate is a cold saw?
Cold saws save time by making pristine cuts that don’t require any finishing, plus the cold saw blades are reusable and can be sharpened numerous times before disposal. Additional cold saw cutting capabilities include: Accuracy is +/- . 004” (tighter tolerance cutting than a band saw)
What are cold saws used for?
A cold saw is a circular saw designed to cut metal which uses a toothed blade to transfer the heat generated by cutting to the chips created by the saw blade, allowing both the blade and material being cut to remain cool.
What are the disadvantages of a band saw?
The Disadvantages: A bandsaw is limited to the size pieces you can cut because of the circular blade. With the Speedster Bandsaw and Diamond Laser 3000, the maximum size glass piece is approximately 10 to 12 inches in diameter. 2. It does not take the place of simple cuts.
What is the difference in a cold saw and a abrasive chop saw?
The cold saw has a toothed, high speed steel blade where a chop saw only has an abrasive wheel. The best part of an HSS blade is that it can be re-sharpened.
What are the disadvantages of a cold saw?
Another downside to cold saws is that the hardness makes the saw blades brittle and subject to shock. Any amount of vibration — for example, from insufficient clamping of the part or the wrong feed rate — can easily damage the saw teeth.
Why is a cold saw called a cold saw?
Cold saws don’t require flood coolant because the heat generated by the cutting action is transferred to the chips. The chips are ejected by centrifugal forces of the rotating blade. This process allows both the blade and the cut material to remain cool, hence the name “cold saws”—but beware of the chips.
How many speeds can be used on a cold saw?
When you attach a cold saw blades to a power saw with two (2) speeds, regulate according to the material you are cutting. When cutting stainless steel, use a much lower speed. When cutting metals, use a much higher speed. The speed list could be surface feet per minute (SFPM) or the regular RPM.
What are the 3 main hazards that could arise from using cold saw?
POTENTIAL HAZARDS AND INJURIES Eye injuries. Sharp edges and burrs, metal splinters. Noise.
How long does a cold saw blade last?
On average, a typical cold saw blade should last at least six months. Damaged teeth. Typically, a cold saw blade can complete between 800 to 1000 cuts before totally wearing out. Also, during their lifespan, you can sharpen them up to 30 to 40 times.
What are 5 general guidelines for using the band saw?
Never push on back of piece with fingers or thumb. Don’t reach across the blade. Make all cuts under power, not while blade is coasting. Never remove guard unless authorized by Technician or WRL Manager.
Can a bandsaw replace a table saw?
In general, bandsaws excel at making curved cuts which allows them to replace some of the basic features of a scroll saw. The creative angles they are capable of creating simply cannot be replicated by the large, circular blade of a table saw. Bandsaws also tend to offer more versatility.
Are Coldsores painful?
Cold sores are small, blister-like lesions that tend to form on the lips, chin, or cheeks, or in the nostrils. They less frequently appear on the gums or the roof of the mouth. Cold sores usually cause pain, a burning sensation, or itching before they burst and crust over. People sometimes call them fever blisters.
Can a cold saw cut aluminum?
Since aluminum is so lightweight, high-speed sawing is optimal. One of the most popular ways to cut this metal alloy efficiently is to use a circular saw blade. Here at Dake, we like to call them cold saws.
What is an abrasive chop saw used for?
An abrasive cutoff saw is also known as a metal chop saw. An abrasive cutoff saw is a power tool that is typically used to cut hard materials, such as metals. The abrasive cut off saw is also great for stainless steel cutting. The cutting action is performed by an abrasive disc, similar to a thin grinding wheel.
Can abrasive cutoff saws cut close tolerances?
Even when cutting extremely hard materials, properly cooled thin-wheel abrasive cutoff generates little heat and produces a clean-cut surface finish. In addition, the method can: Provide cut length tolerances down to 0.001” (0.025 mm) Cut diameters from 0.0005” to 3.00” (0.0125 mm to 76.2 mm)