A high-quality band saw may be able to meet or exceed performance expectations that previously were achievable only with a circular cold saw. If you can cut pieces in layers, then a band saw can compete nicely with the volume throughput of a circular cold saw. In comparing a fully automatic band saw to a fully automatic circular cold saw, generally speaking a band saw costs significantly less than a circular cold saw.
10-29-2009, 08:58 PM #1 Cold Saw Vs. Band Saw Right now the only saw I have is a chop saw and that thing sucks. Not true if the cold saw is semi auto type…which is the only type to buy really…a manual cold saw is a silly choice, unless it’s a non ferrous type, in which case it cuts so fast that manual use is ok. A manual cold saw uses round, HSS blades, that can be resharpened over and over and over again- I have cold saw blades that are ten years old.
A band saw gives a larger cutting capacity, whereas a cold saw limits your cutting capacity. While the initial price of a cold saw blade may be higher than a band saw blade, it’s important to remember that a cold saw blade can be re-sharpened. At SEPCO, we provide a band saw cutting and precision cold cutting saws that are both accurate and fast.
The most important difference between cold saws and band saws is the amount of burr on the cuts that they produce. A band saw can give you good quality cuts, but can’t match the smoothness of results from a cold saw. Due to their straight blades, band saws also cut material more quickly than comparable cold saws.
The band saw type can be either hozontal or vertically oriented – I’ll get to that shortly. The main advantage of the horizontal cutt-off saw is they don’t have the hub assembly to worry about, but rather have a bridge that generally allows larger workpieces to be cut. CAUTION – because the parts will usually be hand held, you need to take a lot more care, as any saw will take fingers, thumbs even, in some unfortunate cases, hands off without even slowing down – they’re used a lot in meat processing partly because of that.
cold saw vs bandsaw Related Question:
How accurate is a cold saw?
Cold saws save time by making pristine cuts that don’t require any finishing, plus the cold saw blades are reusable and can be sharpened numerous times before disposal. Additional cold saw cutting capabilities include: Accuracy is +/- . 004” (tighter tolerance cutting than a band saw)
What is a cold saw used for?
A cold saw is a circular saw designed to cut metal which uses a toothed blade to transfer the heat generated by cutting to the chips created by the saw blade, allowing both the blade and material being cut to remain cool.
What is the difference between a cold saw and a chop saw?
The cold saw has a toothed, high speed steel blade where a chop saw only has an abrasive wheel. The best part of an HSS blade is that it can be re-sharpened. If the sharpening process is done correctly, you can get one blade re-sharpened 15 to 20 times before the diameter shrinks too far to be used on your machine.
Which is better a bandsaw or a scroll saw?
If you want to make fine detail cuts, inside cuts, make patterns and letters, and you want to do so on smaller pieces of wood, the scroll saw is what you want to go with. However, for large, straight, and aggressive cuts on larger pieces of wood, and even metals, the band saw is the way to go.
What are the disadvantages of a cold saw?
Another downside to cold saws is that the hardness makes the saw blades brittle and subject to shock. Any amount of vibration — for example, from insufficient clamping of the part or the wrong feed rate — can easily damage the saw teeth.
What type of PPE should you wear while using a cold saw?
PERSONAL PROTECTIVE EQUIPMENT Safety glasses must be worn at all times in work areas. Long and loose hair must be contained. Hearing protection must be worn. Sturdy footwear must be worn at all times in work areas.
Why is it called a cold saw?
Cold saws don’t require flood coolant because the heat generated by the cutting action is transferred to the chips. The chips are ejected by centrifugal forces of the rotating blade. This process allows both the blade and the cut material to remain cool, hence the name “cold saws”—but beware of the chips.
Can a cold saw cut aluminum?
Since aluminum is so lightweight, high-speed sawing is optimal. One of the most popular ways to cut this metal alloy efficiently is to use a circular saw blade. Here at Dake, we like to call them cold saws.
How long does a cold saw blade last?
On average, a typical cold saw blade should last at least six months. Damaged teeth. Typically, a cold saw blade can complete between 800 to 1000 cuts before totally wearing out. Also, during their lifespan, you can sharpen them up to 30 to 40 times.
Are Coldsores painful?
Cold sores are small, blister-like lesions that tend to form on the lips, chin, or cheeks, or in the nostrils. They less frequently appear on the gums or the roof of the mouth. Cold sores usually cause pain, a burning sensation, or itching before they burst and crust over. People sometimes call them fever blisters.
What is a dry saw?
Dry cutting blades feature segment welds that are designed to prevent overheating, and as a result, they do not require the use of water to cool them. This makes these saws suited to smaller jobs where clean cuts are needed, and a low RPM can still get the job done.
How much does a miter saw cost?
A basic compound miter saw starts at $100, while miter saws with sliding blades start at $125. Dual-bevel miter saws start at $200, and professional-level miter saws with special features can cost as much as $800.
Do I need a scroll saw if I have a bandsaw?
If you are making a jigsaw puzzle for your children, there is no question that you will need a scroll saw and not a band saw. Very detailed and intricate work will not go as well with the band saw. If you are a person that likes crafting and ornate projects, the scroll saw is going to be a much better choice.
Can a scroll saw cut 2×4?
Though scroll saws are generally intended for thinner pieces of wood, they can be used to cut a 2×4. They’re pretty versatile little saws, but make sure to take your time with them. The key to success when tackling a 2×4 with a scroll saw is patience, care, and not pushing the wood too hard.
Do I really need a scroll saw?
So, unless you’re about to start a project requiring the precision of a scroll saw, such as intarsia (wood mosaic) projects or wooden children’s toys and puzzles, you don’t need one. If you are a tool junkie or experimental woodworker, if you don’t already own one, a scroll saw is probably already on your wish list.