At a speed of 0-500-1500RPM, and with a charger that takes an hour to charge quickly. It comes with two rechargeable lithium batteries that can be used again and a charger that can charge them very quickly. A full charge can be done in about an hour and a half. Electric drill driver can be set to run at two different speeds, so you can always get the power you need.
efficient brushless motor and a small desig. . It has a motor that doesn’t use brushes. The carbon brush, which is more durable, doesn’t need to be changed because it lasts longer. no sparks or noise when used. The brushless drill has more power and saves 30 percent of the energy of a brushed drill. It is high-performance and lasts a long time. The small and lightweight design fits into a small space.
20+1 Torque Settings and a max torque of 354 In.lb. The Cordless drill driver has 21 torque settings for the chuck, which makes it easier to drill and screw. Drilling holes in wood, metal, and plastic doesn’t have to be hard with the power drill’s 354 In.lb Max torque.
It has a 3/8″ keyless chuck and an LED light.
You can use your hand to tighten or loosen the keyless chuck on the 3/8-inch cordless drill. It can accept a wide range of bits. You can screw in, change, or remove bits with the Forward / Reverse switch. It is quick to change bits with the Forward / Reverse switch. The LED Light is designed to make it easier to see in a dark or enclosed area.
What You’ll Get. 28 accessories, two 2Ah lithium batteries, a charger that charges quickly, a toolbox, and a user manual are included with the SCANS Cordless Brushless Drill Driver that comes with the charger.
Quite powerful. This is a good thing I bought, because it serves the purpose of being a lighter and more balanced driver tool than a stronger portable drill, especially when working at awkward angles, or with your arm stretched out in space, and so on. It will be updated if there are any bugs. But.. To get the best strength and leverage, I choke up on the handle. When my index finger knuckle turns the switch that controls the spin direction, I don’t know what to do. Only me. Hasn’t happened on any other drills yet. But, the driver looks good.
