The Impact Wrench set comes with two 21V 2000mAh large capacity li-ion batteries. There is a light on the electric drill that shows how much battery power it has. The internal working system between the battery and charger of the tool makes sure that it works well and doesn’t overheat.
Up to 50N.M torque and a 25+3 position clutch make it easier to adjust the torque to the correct level. 2-Speed No-Load Transmissions (0-450 and 0-1450 RPM) let you drill, tighten or loosen screws on wood, metal, and plastic at a wide range of speeds for different types of jobs. 3 ways to work together (Hammer, Driver, Drill).
With a brushless motor, this tool runs cooler and runs more quickly. Compared to brushed motors, the brushless motor lasts longer, loses less battery power, makes less noise, and is much safer to work with because there are no sparks.
ERGONOMIC DESIGN – Insulated desig. The handle has a soft grip and an ergonomic design for maximum user comfort and less vibration. The electronic brake system is very good at protecting the wrist from getting hurt when the motor stops. Trigger-activated LED lights up your work area.
– WHAT YOU WILL RECEIV. There is a cordless drill driver, a quick charger, two 2000mAh lithium-ion batteries, and a charger that can be used for about two hours at a time. There are 9 socket wrenches: 5/6, 7/8, 9/10, 11/12, and 13mm. There are also three twist drill bits, three brad point drill bits, and six screwdriver bits. There is also an adapter for the US socket, a hex screwdriver holder, a flexible shaft driver, a carrying case, and a user manual. There is also a 24-month warranty and lifetime service.
Features of the 21V Cordless Drill/Drive.
Rate of Torque: 50 N..
Powerful 21V lithium-ion 2×2000 mAh rechargeable battery with a lot of power.
Steel can be drilled up to 8mm.
A drill can go up to 23mm deep into wood.
At 50Nm, the max torque is 50Nm.
In this case, there are 25+3 Torque Settings.
3/8(10mm)Chuc.
A device that can charge in 1.5 to 2 hours can be used for that long.
Batteries: 2 x 21V 2000mAh Lithium-Ion Batterie.
0-1450rpm and 0-1450rp.
Charging Voltage: 110 to 240 .
Rubber Handle with a Rubber Over-mol.
Activated LED Light with a trigge.
The net weight is 2.31 KGS/5.1LB.
The case is 28*23.8*7.8cm/11*9.4*3.1inches in size.
Speed control and the ability to go forward or backwar.
Cross-headed and slot-headed are two types of heads.
An easy-to-use tool that doesn’t take up much space.
Package comes with everything you need.
It comes with 1 x 21V Cordless Drill Driver (50Nm.
1 x Fast Charging (100V-240V, about 1-2 hour full.
There are two batteries that have a capacity of 2000mAh each.
This is a Flexible Shaft Driver.
Socket Wrench (5/6/7/8/9/10/11/12/13mm) There are 9 of them.
Three Twist Drill Bits (4/5/6mm).
Brad Point Drill Bits (4/5/6mm): 3 .
A set of 6 screwdriver bits: PH2/CR-VPZ1/CR-VT25/PZ2/5/.
In this case, you need one Socket Adapter.
A Hex Screwdriver Holder comes with 1 of these things.
There is only one Carrying Box.
There is only one User Manual here.
I bought this to help with small repairs on the rental homes I rent out to people. Since I got this new Ryobi drill, so far it’s been as good as my old Ryobi drill. With two batteries, you can use them over and over. So don’t buy this just because of the parts. They’re not worth it. Buy real bits, and this drill will work. The drill is powerful even though the battery pack is only 5 cells. It can run for more than an hour on high torque without recharging for more than an hour at a time. All day long if you do light work. When it comes to wood, it can drive in a 2 1/2 ” drywall screw with ease. A good deal after you get good parts.
