CORDS. cords intended When tool is used out- AUXILIARY for use outdoors An auxiliary handle is furnished with your grinder and can be screwed into either side or the top of the front housing, as shown in Figure 3. DO NOT STORE THE TOOL WITH THE SWITCH LOCKED ON… To do so will cause the tool to start immediately Damage or personal injury may result. Center Wheel on the tool spindle MAINTENANCE OF TOOL CLEANING as shown.
Remove the Angle Grinder DiscRemoving the Angle Grinder disc with factory keysYour new grinder comes with two separate keys that look like flat wrenches. Removing the Angle Grinder disc without keysUsing the palm of your hand, slide the disc in the direction opposite to the arrow on the disc. The main thing is that when changing a disc on a grinder, do not violate safety precautions and remove the disc with the angle grinder turned off.
How to remove an angle grinder disc without the tool. How to remove an angle grinder disc the appropriate way. Now that I’ve shown you how to remove an angle grinder disc without the tool, I’m going to tell you how to do it with the appropriate tool.
An angle grinder disc can be removed without the tool by pressing in the spindle lock to lock the disc and turning the wheel in an anti-clockwise direction. Now that we have covered how you can remove a disc without the pin wrench, let’s also go over how to remove a disc with the proper tool and how to put a new disc on the angle grinder. There you have it, all the possible ways to remove a disc from an angle grinder without the use of the tool that comes with the grinder.
We show you several ways of how to change an angle grinder wheel. Slip your new angle grinder wheel on, and reverse the process. My favorite way to replace an angle grinder wheel involves switching out the stock flange with a Hilti Kwik-Lock flange.
craftsman angle grinder how to change blade Related Question:
Can you change the blade on an angle grinder?
The blade of your angle grinder is held in place by a locking nut. Changing the blade requires this nut to be loosened and removed. This is usually done using a special two-pronged wrench. A wrench that fits the size and shape of your angle grinder’s locking nut should have been in the box when you purchased it.
How do you remove an angle grinder blade?
Use your screwdriver to remove the blade guard before you remove the blade. This will make it easier to get the blade off. Loosen the screw that holds the blade guard in place, or push the release latch on the blade guard to remove it.
When should I replace my grinder disc?
Always replace a cutting disc if it shows any signs of damage. This includes, but is not limited to visible cracks and chips or any signs of bending or twists to the wheel. Cut off wheels should be replaced when they hit their expiration date. This can be found imprinted on the metal center of the disc.
Which way should an angle grinder spin?
Every right-angle grinder is marked with a directional arrow on the head of the grinder that indicates the direction the wheel is rotating when in use. For optimal performance, it’s important to orient the cutting wheel so it rotates into and pulls itself into the workpiece rather than rotating away from the workpiece.
What is the difference between a cutting disc and a grinding disc?
Clue is in the title, a cutting disc is thin and used for cutting and a grinding disc is much thicker and used for grinding not cutting.
What tools use to remove the angle grinder discs?
A pin wrench is the required tool that comes with an angle grinder and is used to remove a disc. This wrench resembles a pitchfork and has two knobs on the end that you insert into the drive bolt to loosen the nut holes that attach to the disc.
How long do grinding discs last?
1 – Cutting and Grinding Discs Have Expiry Dates. This date is generally printed on the centre ring and is at a maximum three years from the manufacture of the disc. On smaller discs which lack a ring, this date may be printed on the label or even the disc itself.
How do I know what grind my disc is?
Angle Grinder Wheel/Discs The hardness and smoothness of a grinding disc is measured by grit. Just like sandpapers, a lower grit number in a grinding disc means it is coarse and a higher number means the grinding wheel is less coarse.
What is the worn out diameter of a grinding disc that needs replacement?
Do not use grinding wheels when worn less than ½ of their original diameter. Replace the wheel when worn to ½ of the original diameter. When the grinding wheel is worn to the paper washer it should be replaced. 10.
Do you push or pull a grinder?
You should work with a straight grinder when cutting using the side (of the bit) and a 90-degree grinder when you are using the front (if possible). That way, you’ll have more control of the thrust and you won’t worry about the tool grabbing or pulling at you.
Do angle grinders spin clockwise?
The simple answer is yes. Angle grinder rotates in opposite direction as thread pitch. It is general rule for all nut clamped tooling.
What direction should you feed the cutting disc into the workpiece?
The direction of the cutting motion is important. Always feed the cutting disc into the work so that it cuts in an upward direction.
Can I use cutting disc for grinding?
There is also a difference between cutting and grinding discs. Cutting discs are thin and sharp and can’t be used for grinding. Make sure that the grinder is attached properly and the bolts are tightened.
What is cutting disc?
Often cutting discs, also known as cut-off wheels, are made from a solid abrasive disc. These discs are often used for cutting metal; they are composed of an abrasive mix of grit and adhesive that is formed into a thin, rigid disc with fiber webbing running through it for strength.
Which way does an angle grinder unscrew?
Using the palm of your hand, slide the disc in the direction opposite to the arrow on the disc. This should loosen the nut enough to remove it with your fingers. If that doesn’t work, you can use pliers to break the old disc into pieces, giving you better access to the drive bolt and retaining nut. TIP!
