My intent was to us the saw to cut out blades and then put saw and table away when not in use. Good decision, I use that little saw for so many things. Cutting pins, trimming handle materials, cutting bolster material, opening steel packages from Aldo and the list goes on and on.
An angle grinder is a hand-held power tool used for cutting. Many different types of cutting wheel can be mounted on an angle grinder but they’re all essentially grinding wheels. Our vertical bandsaw is used more for cutting shapes than cutting to length.
I have almost everything, 4 by 6 bandsaw, portaband, portaband on a stand,angle grinder with a thin cutting wheel usually fitted, another angle grinder with a regular abrasive wheel usually fitted, a dremel usually fitted with a cutting disc, an abrasive disc chop saw use of a circular saw if Ineed to cut Aluminium sheet, and a bench mounted shear for thinner stuff. This 100yr old machine will virtually silently cut its way through anything within its capacity and turn itself off once the job is done. It is fairly, though not perfectly accurate ( Within 15 thous in 4 inches depth of cut.
Looking for a saw to cut exact 90º and 45º angles in tube steel. I value accuracy and build quality the most when looking for tools, so I’d prefer not to get something that’s going to be consistently off by half a degree like my previous miter saw. I only have experience with upright band saws for cutting wood so I’m not even really sure what I’m looking at when I see one of the metal-dedicated band saws.
Short chopping cuts will cut faster, cooler and more accurate than a steady down pressure on the abrasive blade. My chop saw is just setting collect dust, but I will drag it out to make fast cuts in angle iron. I use the band saw on round stock and thick flatbar, and large angle iron, and the torch or plasma cutter for flat plate or anything to heavy or big to fit on the other tools.
Plasma has its place, super on light materials, salvage sheet, etc Ain’t nuthin free, consumables are not bad, last a long time. I would want a torch too for auto work, would personally find it about impossible to do without one. I have all of them, cut off, sawzall, rarely use band saw, plasma, chop saw, torch about daily and a few wheels on cut off grinder for intricate type work or when other methods just wont do.
If you are making things that can be completely cut before assembly, the bandsaw is good. Then while it’s cutting, mark the next set of pieces to be cut. The bandsaw seems to leave less cleanup of the cut before assembly also, except for what is mentioned below.
cut off wheel vs band saw Related Question:
What is the difference between a metal cutting band saw and a wood cutting band saw?
A metal cutting bandsaw is typically built more solidly than a saw designed for cutting wood, so there are no issues with the machine itself. As for the blade, the wood fibers could clog the metal blade’s teeth more quickly, and the blade will probably cut through the wood more slowly.
Can you cut straight with a band saw?
Making Straight Cuts The band saw can also excel at a variety of straight cuts. Resawing, cutting thin strips of veneer, or even rough-cutting lumber from logs (using a specially-designed sled) are all tasks that a band saw can tackle. For these straight cuts, you’ll need the right blade plus a sturdy fence.
Can a band saw cut rebar?
The Milwaukee M12 Band Saw is the first official one handed cordless band saw so it is super easy to use holding the rebar in one hand and cutting with the other.
Can you use an angle grinder as a cut off tool?
You can use your angle grinder to cut anything you’d use a cut off tool for. Since it has more horsepower, it’ll also be easier to cut things with the angle grinder. However, an angle grinder is heavy and needs a two-handed operation. It isn’t built for use in tight spaces like a cut off tool.
Can I use metal saw to cut wood?
You can use a metal blade to cut wood. A circular saw blade cut metal in a sluggish rotational speed of 25m/s. They are driven by a motor having high power and an A/C vector drive. They are long lasting and non-reusable.
Can you use a band saw to cut wood?
With the correct blade, a band saw can cut wood or metal, in either curves or straight lines. Blades come in a variety of widths and tooth counts. Narrower blades are good for tighter curves, while wider blades are better at straight cuts.
Why does bandsaw not cut straight?
Band Saw: Why won’t my band saw cut straight? When the band saw cuts crooked, a dull blade, improper feeding, loose blade tension or not using a work piece guide could be the cause. Use the rip fence or miter gauge to guide the work piece uniformly through the cutting blade to make straight cuts.
Why are my bandsaw cuts wavy?
The clasic cause for wavy lumber is pushing a dull blade past it’s limits. Sharp don’t get it.
How thick of wood can a bandsaw cut?
Band saws are the undisputed champ when it comes to cutting curves and slicing through thick material. Many small band saws can slice though lumber a full four inches thick, and bigger saws handle six-inch cuts.
Does Lowes cut rebar?
Unfortunately, Lowe’s cannot cut rebar within its stores, even if you have purchased it from Lowe’s as of 2022. However, Lowe’s does sell tools to help you cut and bend rebar yourself both in-store and online. Also, local contractors or other hardware stores may be able to bend rebar for you.
Can you cut rebar with a Dremel?
I think the Dremel could do it, but you probably will go through many wheels and take a long time. A hacksaw can do it, too, but if you have a lot of cuts to make – it will be a tiring exercise.
Can rebar be cut with a hacksaw?
When it becomes necessary to cut rebar, the best possible cutting tool is a rotary cut off wheel. Rebar prevents cracking in concrete when properly installed. In the absence of this tool, however, rebar can be cut with a hack saw.
What are cutoff tools used for?
Cut-off tools are small, single-handed tools that are used to cut or sharpen metal pieces. They usually have around a 1 HP motor and have a cutting disc aligned at a right angle. Because of this design, they are not made to be used on thick pieces of metal. Instead, they are best for cutting through very thin pieces.
What’s the difference between grinding and cutting?
Grinding and Cutting are important parts of machining, but what is the difference between them? First let’s know more about the using tools of grinding and machine, when grinding the tools need are grinding wheels, while when cutting the tools need are cutting tools.
What is the difference between an angle grinder and a multi tool?
Among the two, oscillating tools are generally more maneuverable. They have thin blades that can easily be inserted into tight spaces for cutting objects. Angle grinders are also easy to handle. But their attachments are generally larger, which makes them difficult to use in tight spaces.