A 10-1/2-inch piece of wood “It’s long, 5-1/8″ wide, and 7-1/2″ high. The spindle holder is 3-5/32” (80mm), the vacuum port is 3-13/16..
Detachable bristles make it easy to change out the bristles when the brush gets worn out.
Good at getting rid of wood chips and dust.
Easy to put together and install. It’s easy to change parts.
a four “A dust collection system is needed TLD. The price is great, but it’s a little flimsy.
Adapter rings make it easy to attach to the body of a spindle or router, so it can be used for many different things.
2. The port for the collection hose wasn’t standard, but it should only need to be snug.
3. The vacuum hose connection and most of the brush strip can be removed without having to use any tools. There are positive latches on both sides of the unit that make it easy to remove these parts. This makes it easy to get to the chuck when you need to change tools.
3. With a 1hp dust collector attached, I haven’t seen any dust or chips coming out, even when the air-cooled router is running at full speed.
4. It’s a little flimsy, and I’d like the body to be a lot thicker and have a lot more reinforcement in it.
