This cordless finish nailer that runs on 100% battery power doesn’t need a compressor, hose, or expensive gas cartridges.
The 16-gauge finish nailer has a brushless motor that makes it run longer and last longer.
A tool-free selectable trigger that can be used for sequential or contact actuation modes.
For precise countersinking of nails, you don’t need to use a tool.
To clear nail jams quickly and easily, you don’t need to use a tool at all.
LED lights that can be used for both lighting and diagnosing tools are becoming more common.
To quickly reset the driver blade in the event of a stall, the tool-free stall release lever is built into the car.
The DEWALT DCN660 16 Gauge Angled Finish Nailer can drive 16 Gauge angled finish nails from 1-1/4-inch to 2-1/2-inch. This makes the DEWALT finish nailer great for attaching crown molding, casing, and baseboards, as well as other types of molding and trim.
With a brushless motor that is powered by a DEWALT 20V MAX, this tool has a lot of power.
A lithium-ion battery makes the DCN660 ready to work without having to use gas, a compressor, or a hose to get the job done.
Use a pneumatic tool and a cordless tool to do both big and small jobs.
20 volts is the maximum voltage of the battery when it’s not being used.
It has a voltage of 18.
This is one of the reasons I’m writing this review. I read the first person’s review (Andy H.) and I just wanted to explain why he doesn’t like this gun as much as he does.
As a finish carpenter, it’s not good for you to be using an electric or battery-powered nailer. You should be using a finish nailgun all day and every day.
Do not buy one from a company that says they can be used for extreme every day use.
The only guns that can be used for that kind of heavy everyday use are pneumatic guns.
You can fire a lot of nails before you have to fix them, and they are very cheap and light. You can also throw them away and buy a new one at that point.
I can see why you think it would be better to use something without a cord all day, but it’s not.
They make small compressors and hoses that are very light and flexible for finished nailers.
Almost to the point where you don’t even notice that it has a hose attached to it.
If you don’t run thousands of nails through this gun every day, every day, it’s a great machine!
It works great, the battery lasts a long time, and it’s easy to set up and use.
Because there is no gas to buy, there is less maintenance and less operating costs because there is no need to buy gas.
: I have had this gun for a long time. It has never had a problem with me.
Again, I’ll say that if you plan to use this every day, it’s not the right gun for you.
Not what they were made for.
A few times a week, I do a project with mine. I take care of and keep it clean, too.
It runs well.
So sorry for the long review.
