It has a 13-amp motor with 9,000 RPM.
Trigger switch with the option to stay on.
Dust ejection system technology is used to keep the tool from being harmed by dust and other debris.
The number is 5 “type in 27 guar.
flanges on both side.
The DEWALT DWE43113 4-1/2″ – 5” high performance trigger grip Grinder has a 13 amp motor and is equipped with the Dust Ejection system technology, which helps protect the tool from damaging dust and debris that enters through air intake vents. This helps keep the tool safe. One of the things it has is a handle on the side. It also has a 5 “type the 27 guard. In addition to the trigger switch, this Grinder also has an option to “lock on.” This means that when the machine is not in use, the no-load speed is set to 9000 RPM and there are inner and outer flanges. There are some specs: The diameter of the wheel is 5 “Spindle size: 5/8-11 inches, 1700 max watts out, 5.1 lbs. Tool weight: 5.1 lbs. DEWALT’s 3 year limited warranty is on this tool. 1 Grinder and 5 other things “type 27 guard with a side handle, inner and outer flanges, and a type 27 lock.
At a big box store in the area, I went to buy a Dewalt angle grinder. The 4012 model was the one I had in mind. If you tried one out and saw how fat it was, as well as how terrible the paddle switch on the back of it was, it was put back on the display. It was the first one I looked at. It was very comfortable to hold, the switch was very nice, and the weight was right. People at the store didn’t want to price match because “Amazon uses third-party people and you don’t know what you’re going to get,” so they wouldn’t. So, I took out my phone and ordered it in front of the clerk, or clown, who said that. Had it 2 days after that.
Owners manual and 6mm hex key for the arbor were also in the package, but they were small and not very important. In my barn, it was about 40 degrees outside. I noticed that the power cord isn’t made of the typical plastic that gets stiff in the cold. During the time that I was grinding, it didn’t bother me at all. It’s a small thing, but it shows how good the tool is. Flapper wheel: Type 29 60-grit. It fit perfectly in the large guard. Hex key: The 6mm hex key works well to tighten and loosen grinding wheels without the need for a spanner wrench or other tool (or included). Worked on a piece of rusty angle iron that had been lying around. A lot of sparks flew, and it made that steel shine. Plenty of strength. It’s very easy to control, and the balance is great. It was made for a type 27 wheel, but it also works well with a type 29 wheel. It will probably also work with a type 1 wheel.
A $30 extra fee was worth it to move up from the 4012 to this one.
