In general, many woodworkers either use combination blades or rip blades when cutting plywood, and both types of blades are perfect for plywood cutting. Given the many types of brands and models of circular saw blades in the market today, choosing the best blades become doubly difficult. A circular saw is a versatile tool, and as long as you are using the right blade, you can quickly cut through plywood using a circular saw and end up with a refined finish.
To save you time and money from damaged materials, I have written the best circular saw blade for plywood reviews. While cutting plywood with a circular saw, stack a sheet face down so that chips or burrs appear on the bad side, where your saw slides. Back to menu Circular Saw Blade for Plywood FAQ. In this section, I answered frequently asked questions from my readers about working with plywood.
dewalt circular saw blade for plywood Related Question:
What circular saw blade is best for cutting plywood and why?
Best Circular Saw Blade: Ultra Fine Finish With 60 teeth and a . 059-inch kerf, the Freud D0760X Diablo Circular Saw Blade creates clean, smooth cuts on delicate material like veneer plywood and melamine. This thin kerf greatly reduces the chance of chipping and blowouts, and doesn’t waste any material.
What blade is best for cutting plywood?
To get the best-quality cuts, invest in an 80-tooth blade designed for sheet goods. The small teeth take little bites to reduce chip-out and are steeply beveled at their edges to score the veneer face. You’ll have to slow your feed rate, but will get a much smoother edge.
Can I use a circular saw on plywood?
Circular saws can be used to make square, miter, bevel and compound-angle cuts. When fitted with the appropriate blade, it can even cut metal and concrete. However, there’s one job for which the circular saw is particularly well-suited: cutting large sheets of plywood down to size.
How many teeth should a circular saw plywood blade have?
Framing blades have 24 teeth and are effective for jobs such as rough carpentry, where speed is more important than getting a clean cut. Plywood blades have 100 or more fine teeth designed to create a finish with minimal splintering.
How do you cut thin plywood?
To cut thin plywood correctly, you need to use a table saw with a blade that has a high teeth count. The more the teeth on the saw blade, the better it will cut plywood. You can also tape down both sides of the thin plywood with masking tape as that will prevent it from tearing or breaking.
Is more teeth on a saw blade better?
Blades with more teeth yield a smoother cut. Blades with fewer teeth remove material faster, but tend to produce a rougher cut with more “tearout”. More teeth means you will need to use a slower feed rate.
What do you put under plywood when cutting?
The Secret is 2×2 Foam Board Here I have 8 laid out to support a full sheet of 3/4″ plywood. And unlike full insulation sheets, they are so easy to store. I just stack them up on a top shelf or under my bench.
How do you cut thin plywood without splintering?
Naturally, you’ll want to select a fine tooth blade that works well to cut plywood. These tend to have more teeth per inch, as well a higher bevel angle that can slice through the wood. For a circular saw, you can easily pick up a plywood blade for $20 at any home center, and it will work magic on your cuts.
How do you cut plywood without a blowout?
Install the proper blade on your circular saw for different kinds of plywood. For precision cuts on hardwood plywood such as in cabinetry, use a carbide-tipped blade with square-cut teeth. Known as a cross-cut blade, it cuts smooth and straight without chipping or splintering loose fibers.
What is a 24 tooth blade used for?
For most construction work, a 24-tooth general use blade is sufficient. That blade is very aggressive and will help you rip and cross-cut lumber and sheet goods quickly and with a high degree of accuracy. With a 24-tooth demo blade, you’re getting work done quickly, but you won’t get a near-finished edge.
What is a 60 tooth saw blade used for?
A crosscut blade, on the other hand, is designed to produce a smooth cut across the grain of the wood, without splintering or tearing. This type of blade will usually have 60 to 80 teeth, and the higher tooth count means that each tooth has to remove less material.
What is the TPI for plywood?
Instead, select a 10- to 12-tpi blade for larger, gradual curves, or a 20-tpi blade for tight curves (1″ radius or less) in solid wood and all cuts in plywood or melamine-coated particleboard.
How do you cut 2mm plywood?
2mm birch ply would be hell with a skinny Xacto knife but it does cut decently with a sturdy utility knife. Another option that works well is a hand fret saw used with a “birdsmouth” bench board.
How do you cut 3mm plywood?
3mm I’d be using a tablesaw (best) or fretsaw (second choice) to do the job. Cut to within a couple of millimetres of the marks, then trim the edges up with a Stanley Knife and sanding blocks.
What is the thinnest plywood?
The thinnest plywood on the market ranges all the way down to 2mm thick (just over 1/16 inch). These are obviously specialty plywood products, manufactured for special applications which can’t be accomplished by any other product on the market, whether plywood or some other material.
