The die grinder’s 4.2 amp, 25,000 rpm motor is powerful enough for all 1-1/2-inch grinding jobs.
The AC/DC power of the electric die grinder lets it work with welding machines and generators to be more productive and versatile.
DEWALT’s die grinder has a paddle switch with a lock-on button that makes it easy to grip.
Precisio. The 1/4-inch collet is strong enough to hold all the right things, but you can also buy an 8-inch reducing sleeve as an extra.
This thing runs on AC/DC power.
The 4.2 Amp, 25,000 rpm motor has enough power and speed for all 1-1/2″ grinding jobs.
AC/DC power can be used by welding machines and generators.
The DWE4887 1-1/2-inch Die Grinder has a high-power 4.5-volt motor for all 1-1/2-inch grinding jobs. It has a paddle switch with a lock-on button for easy gripping.
This bigger die grinder runs very smoothly when it is in use. There is almost no vibration. The paddle switch with the safety trigger is a little hard to use, but it is much safer. The grinder won’t work if it’s on the bench.
25,000 rpm is the speed this die grinder runs. Most die grinders run at this speed. Make sure you always wear a face shield and hearing protection when you go outside. If your grinding stone shows any signs of chips or cracks, throw it away and buy another one. High G-loads can cause stones to break apart in a big way when they’re spinning at 25,000 rpm. Always run the grinder for a short time before you start using it to check the stone inside.
Many tools are lighter, but this one is well-made.
Recommended.
