The dust extractor has three replaceable optimized dust nozzle heads that are tuned for bits up to 1-inch in diameter, all stop bits up to 1.5-inch shoulder, and small diameter bits up to 0.5-inch in diameter, according to the manufacturer.
DEWALT dust extractor bits are available in lengths of up to ten inches in overall length.
Easy tool assembly and disassembly are made possible by the quick release.
Inline design with a small footprint; the rotary hammer and dust collection are only 3.72-inch wide when installed.
The dust box is made of durable clear polycarbonate with a replaceable HEPA cannister that removes 99.97 percent of airborne particles 0.3 microns or larger.
Anchor hole depths can be precisely controlled by adjusting a depth stop.
Dust extractor mounted LED for illuminating work environments with low light levels.
Table 1 complies with OSHA standard 1926.1153.
Dust extractor compliant with OSHA Table 1 for the DCH263 20V MAX* XR Brushless 1-1/8-inch D-Handle SDS Plus Rotary Hammer with a D-Handle SDS Plus Rotary Hammer. This dust extraction system is equipped with a powerful built-in motor that increases suction while also allowing for high-speed drilling. After the drill is turned off, the 2-second power-off delay ensures that the dust extraction process is not interrupted. The DWH205DH is equipped with three nozzle heads to ensure the most effective dust collection possible during application. The nozzles that come with the kit are tuned for bits with diameters up to 1 inch, all stop bits with shoulders up to 1.5 inch shoulder, and small diameter bits with diameters up to 0.5 inch. When it comes to drilling applications, this dust extractor allows for bit lengths up to ten inches in overall length. A wide variety of anchors, such as pinch nails, rod hanging systems such as dropins, large diameter sleeves, stud/wedge anchors, and screw anchors, can be installed as a result of this. This unit is equipped with an OSHA-compliant Dust Box Assembly (1926.1153). A filter cleaning mechanism and a HEPA filter are included, and it effectively removes 99.97 percent of airborne particles with a diameter of 0.3 microns or greater.
The suction is weak, and the dust compartment fills up far too quickly; however, it is simple to use, even if you have to remove the handle first before you can use it. In addition, the nozzle is filled. It’s important to get up quickly, especially if you’re drilling concrete.
