The DEWALT 7 1/4 circular saw has a motor that has 13 Amps of power, which is the same as a lot of power.
There is no load on the cordless circular saw when it runs at 9000 rpm. It can be used with 6-inch grinder wheels for jobs.
When the trigger is released, the brake on the small circular saw starts working. It takes 1.5 seconds for the saw to come to a complete stop with a standard grinding wheel (4-1/2-inch x 1/4-inch bonded abrasive wheel, non-hubbed).
Kicbac. Brakes are used when there is a pinch, stall, or bind-up. The electronic brake is used to quickly stop the wheel, slow down the movement of the grinder, and turn off the grinder.
When a pinch or stall is detected, the E-CLUTCH shuts down the motor. It does this in less than a tenth of a second.
Up to 30% more power than the DCG414 Grinder*.
You should buy the FLEXVOLT 60V MAX* grinder. It’s 4-1/2-inch – 6-inch long. It has more power than the DCG414 60V MAX* Grinder with 2300 max watts out. This grinder has a no-load speed of 9000 rpm and a 13 Amp motor equivalent power. This gives it the ultimate power. It’s part of our PERFORM & PROTECT line, which means it has a Kickback Brake and an Anti-Rotation E-CLUTCH System.
If you want to buy a small grinder from DeWalt, this is their most recent model. They have at least three or four different types. A lot of power for a grinder this small. This one runs on Flexvolt 20-60 batteries and has about 3-HP, which is a lot for a machine this small. That’s not the only thing: It also has a brushless motor. If you tried, I don’t think you could overwork this grinder even if you tried.
