Repeatable accuracy and worksite durability are provided by a stainless-steel miter detent plate with 14 positive stops. The 12-inch miter saw blade can be used with this plate.
Crown molding can be nested up to 6-5/8 inches away from the fence on the mitre saw’s tall sliding fences. Base molding can be nested up to 6 1/2 inches away.
There are positive stops at 0 degrees, 22.5 degrees, 33.9 degrees, and 45 degrees on the DEWALT miter saw. This means that the saw can bevel to the left and right.
Left and right miter capacity: 0 degrees to 50 degree.
A cam lock miter handle with a detent override makes it easy to make quick and accurate miter angles.
Integrated CUTLINE: LED work lights show the cut line without having to move the lights. This ensures that the cut line is visible and accurate.
This 12-inch Double-Bevel Compound Miter Saw has a 15 Amp motor that runs at 3,800 rpm to give it more power and last longer. The LED work light system has a built-in CUTLINE feature that doesn’t need to be adjusted to show cut lines for accuracy and visibility. This saw has a stainless-steel miter detent plate with 14 positive stops and a cam miter lock system that makes it easy to make adjustments and keep it accurate. Six-1/2-inch base molding and 6-5/8-inch crown molding are held in place by tall sliding fences. A high-efficiency dust duct is concentrated at the point of cutting to get the most dust. It has a lightweight design and a built-in carry handle that make it easy to move.
To start this review, I need to say that I use this saw for more precise work than rough work. When I build things, I’m more interested in getting the angles right and the miters tight than in brute strength. With this saw, I was able to get both. When you take the saw out of the box, you get a sense of how good it is right away. Was well-packed almost to a fault. As long as they didn’t slow down, I think it would have worked out. The overall look and finish of the saw are great. Angle dial: The bottom of the angle dial has a large dial that is easy to read. The machined aluminum bed looks bright, clean, and smooth. Nothing moves or flexes, and the saw has a lot of weight that makes you feel safe but won’t break your back. If you’re done with your work. Most of the yellow on the blade will smear on your first cuts if you cut through some stock first. As long as this can be sanded off, it’s not a big deal. It didn’t seem like the XPS system would be very useful at first. At the time of purchase, it was cheaper than a regular computer. This system is dead on the money. For a shadow to be clear, you need to get the blade very close to the thing you’re cutting. You’d probably be doing this anyway, so this isn’t a big deal. The motor is strong, and it moves through woods like oak, walnut, and ash with no trouble. There isn’t much more you need than a job site saw that can cut 2x4s like they’re not even there. If you want a saw that can make perfect 45s on your rosewood jewelry box, this saw is for you. Regardless of what you plan to do with this saw, I can say that it will work for you.
