Product 1: A Makita-built motor with a maximum torque of 71 in.Lbs. is housed in a compact design.
Product number one: an integrated L.E.D. When it is time to recharge the battery, a flashing light indicates this.
For high or low torque applications, Product 1 has a 2-speed design with 200 and 650 revolutions per minute.
Product 1: It can be used in either a straight or a pistol grip position.
A rare earth neodymium magnet is two times stronger than the magnets used in standard insert bit holders (Product 2).
Product 2: Xtreme torsion technology is designed to allow the torsion section of the bit holder to flex under load, relieving pressure off of the bit tip and resulting in increased durability in high torque applications, as well as increased productivity.
To allow the torsion technology to fully activate, the product 2 is designed as a two-piece construction.
Produt 2: A high-quality steel that has been designed for use with impact driver.
Makita DF012DSE 7.2V Lithium-Ion Cordless 1/4″ Hex Driver-Drill Kit with Auto-Stop Clutch, 7.2V Lithium-Ion Cordless 1/4″ Hex Driver-Drill Kit with Auto-Stop Clutch, 7.2V Lithium-Ion Cordless 1/4″ Hex Driver-Drill Kit with Auto-Stop Clutch, 7.2V Lithium-Ion Cordless 1/4″ H.
To meet the demands of torque-sensitive assembly applications, Makita’s 7.2V Lithium-Ion cordless driver-drill kit with auto-stop clutch provides convenience as well as precision drilling and driving power. In addition to the ultra-compact design of a cordless screwdriver, the DF012DSE also features 21 clutch settings and an auto-stop clutch for enhanced fastening control. While operating in drilling mode, the DF012DSE is propelled forward by a Makita-built motor that produces a maximum torque of 71 inch-pounds. The 200 RPM and 650 RPM gear selections are available for low and high speed applications, respectively. A variety of fastening torques are available through the 21 clutch settings, ranging from 32 in. Lbs. in clutch setting #1 to 50 in. Lbs. in clutch setting #21. The auto-stop clutch, which provides increased precision and control by shutting down the tool when the clutch is disengaged and preventing overdriving on the fastener, is included. Because of its versatility, the tool can be used in either the straight or pistol grip positions. The DF012DSE is only 1.2 lbs in weight. A more compact design measuring only 10-3/4″ long (in-line) and 8-5/8″ long (pistol), combined with an ergonomic shape that fits like a glove, results in less operator fatigue and a more productive workplace. The rocker is also equipped with a built-in LED work light that is controlled by a separate switch on the opposite side of the rocker and that allows for more accurate work while working in the dark. The DF012DSE also includes a low battery indicator, which indicates when the battery needs to be recharged by blinking the L.E.D. Light. When not in use, the switch drive Lock prevents Active discharge from occurring in the case, and the tool can be used as a screwdriver when in the Lock position. Designed for torque-specific assembly work, the DF012DSE provides versatile power in a compact package with a dual position handle and precision clutch settings for a user-friendly experience.
A holder for the Makita B-35097 Impact Gold Ultra-Magnetic Torsion Insert Bit.
Makita impact GOLD is a new fastening innovation that includes a complete line of insert bits, bit holders, nutsetters, socket adapters, and other accessories. Impact gold is designed specifically for use with high-torque impact drivers, and it is constructed of high-strength steel to provide a longer service life. In addition to Xtreme torsion technology, the impact GOLD ultra-magnetic insert bit holder (B-35097) incorporates a flexing torsion section that allows the bit holder to flex under load and relieve pressure off of the bit tip for increased durability in high torque applications. Two-piece construction is intended to allow the torsion technology to operate to its full potential. Because the rare earth neodymium magnet is two times stronger than the magnets in standard insert bit holders, users can fasten the insert bit with just one hand, which is a significant convenience. Designed for use with Makita impact GOLD ultra-magnetic insert bits (sold separately), the Makita impact GOLD ultra-magnetic insert bit holder is ideal for driving screws in a wide variety of demanding applications such as deck building, framing, and installing plywood subfloor, among others.
