[Angle Grinder Power] is a term used to describe the power of an angle grinder. An air pressure of 90 PSI is applied to the DFESKAH pneumatic angle grinder, which allows it to operate at a free speed of 11,000 RPM and deliver the power required to complete difficult tasks. It is particularly suited for the removal of high-performance materials.
[Design of the Side Exhaust.
Side exhaust design is used, which prevents oil and dirt from being sprayed on clothes when compared to the front row and rear row, and is also safer and more sanitary.
[Movable Handle] is a movable handle.
DFESKAH air die grinder has a movable handle design that allows it to fit into tight spaces and be used in a variety of ways. Use with the grinding wheel makes it ideal for pre-welding grinding as well as post-welding grinding of the surface of the weld. Complete your tasks in a jiffy.
[Comfort.
The ergonomic design, lightweight composite shell, enhanced grip design, and lightweight and balanced structure all contribute to improved comfort, reduced fatigue, and ease of use over an extended period of time, among other benefits.
[DFESKAH Customer Service] is available 24 hours a day, seven days a week.
You have the option to return or exchange if the item is not suitable. We will also provide online assistance 24 hours a day.
Greetings and welcome to the DFESKAH brand story.
The DFESKAH team concept is at the heart of the product’s value proposition (Air Angle Grinder). DFESKAH strives to meet all of our customers’ needs, from product development to product design to product production and packaging to after-sales service, and to continuously improve our products. Allow the DFESKAH air angle grinder to become a part of your daily routine.
DFESKAH (Air Angle Grinder) assures you that we will carefully consider and respond to each and every comment you make. We encourage you to contact us as soon as possible if you have any questions or are dissatisfied with our products. We will provide you with a free replacement or a full refund.
Keep in mind that you have a pneumatic angle grinder.
Before each work, inject two or three drops of special pneumatic oil into the air inlet, connect the air pipe, and allow the machine to idle for two to three minutes to allow the internal lubrication of the machine to be fully completed. If you notice that the machine is getting too hot or losing power while working for an extended period of time, you can add special oil for lubrication to clean the machine.
Maintaining the handle position with your left hand while controlling the switch with your right hand is a good strategy. When refueling with the porous exhaust hole, please keep in mind that the exhaust hole should not be directed at people or animals, for example, because the oil sprays or the airflow is too large. This will help to prevent accidental injury.
It is not permitted to be stored in damp or open air (note: our air tools cannot be used for wet grinding, if necessary, please purchase special water grinding tools. It takes approximately 30-40 days to perform routine air compressor and oil-water separator maintenance. Drain and remove impurities from the tool, and keep it clean and dry to ensure that the air entering the tool is free of contaminants.
The following are the contents of the package.
1 x Angle Grinder with Air Compresso.
1 x American quick connector (as pictured.
1 x 20mm bayonet wrench (optional).
1 x 14mm galvanized open-end wrenc.
1 x 4 Inch grinding wheel with dimensions of 100*6*16m.
1 pair of earplug.
1 pair of protective goggle.
1 pair of goggle.
In the aftermath of a serious injury caused by an exploding grinding wheel on an open hand held grinding tool, I realized that this danger is always present in the workplace. I had been using the old system of non-shielded grinding wheels with no problems for many years prior to this. When I got the message, I decided to purchase a safer tool and get used to working around the perceived inconvenience of using a shielded tool instead. To my surprise, the inconvenience faded away quickly, and I was able to maintain confidence in my own safety while utilizing this tool. Despite the fact that it comes with safety goggles, I’ve decided to use a full face shield as an additional precaution. I am not a novice fabricator; I have been in the business for many years. As a result of my research, I have discovered that it is not necessary to spend a lot of money on certain tools that are used frequently and have a short life span. The big-name brand wears out just as quickly as the lesser-known brands, and both can last just as long if they are cared for properly.
