You may well have heard both the term plate joiner and biscuit joiner and assumed they were in fact different tools. Both a plate joiner and a biscuit joiner are the same thing just with different names. Biscuit joiner vs plate joiner – in the US they are more commonly referred to as a biscuit joiner in the UK and Europe you will probably hear the term plate joiner used more often.
You must have heard these terms biscuit joiners and plate joiners, and you are confused regarding their difference in applications. In this Biscuit Joiner vs. Plate Joiner guide, we’ll tell you about this tool in detail and also review two great products. You can buy any of the reviewed two products in this Biscuit Joiner vs. Plate Joiner guide, and you’ll be satisfied with their performance.
difference between plate and biscuit joiner Related Question:
Are plate joiners worth it?
They will definitely provide more strength than glue alone, but not a lot. If your boards are too narrow, you can reinforce the joint by adding the biscuit on the back side of the face. But again, I would prefer to just use pocket screws, dados, or rabbets.
What are plate joining biscuits used for?
A biscuit joiner or biscuit jointer (or sometimes plate joiner) is a woodworking tool used to join two pieces of wood together. A biscuit joiner uses a small circular saw blade to cut a crescent-shaped hole (called the mouth) in the opposite edges of two pieces of wood or wood composite panels.
What are the disadvantages of a biscuit joint?
Biscuit joints do not stand up well against other joinery methods. We won’t spend any time comparing with mortise and tenon joints because all other joinery methods pale in comparison when measuring strength. But, as an example, the use of dowels as opposed to biscuits is a step up in strength.
What can I use instead of a biscuit joiner?
Some tests suggest a dowel joint will provide stronger joinery than biscuits. Tests also indicate that dowel joints are not as strong as tenon joints or dovetail joints. They do make solid and accurate joints, though. A dowel joint will be a better method than nails or screws and are much less susceptible to breakage.