The most common cause of chainsaw chain damage and breakage is probably a lack of knowledge of properly using and maintaining a chainsaw. When you need to replace a part on your chainsaw, whether a chain or another part, never try to be frugal and save money by getting cheap or low-quality parts; one of the main causes of chain breaks in a chainsaw is a low-quality chain. You need to check the tension on the chainsaw chain before every use to ensure that you won’t use the chainsaw and the chain unexpectedly snaps.
Chainsaw chains can break and snap due to improper use and maintenance, using a poor-quality chain, and incorrectly assembled chain parts. Chainsaw chains can come apart, break, or snap, especially if you aren’t well-informed about correct chainsaw use and maintenance. Improper use, lack of maintenance, low-quality parts and improper chain tension are the main reasons chainsaw chains deteriorate and eventually break entirely.
Using a low-quality chain bar with your saw is one the biggest issues that causes a chain break. If the chain is too tight or too lose it can cause a chain break. A single loose rivet on a chain can cause a whole chain to break.
Another cause of chainsaw chain breaking is simply using the chainsaw while the tension of the chain is not adjusted properly. To prevent a chainsaw chain from breaking, don’t touch the running chainsaw blade on metal or stone. If your chainsaw chain broke, then to use it in the future it’s important to install a new and functioning chain.
I have had only two break on me, and both of them were on my 372.Both broke while in the cut, one when the tip grabbed a branch that I didnt see on the other side, the other broke for no reason at all. Both chains were shot anyway, both were filed down to the witness mark and ready to be retired anyway. Never have been hit by a broken chain, but there is always tomorrow…..
do chainsaw chains break Related Question:
How long should a chainsaw chain last?
The lifetime of a chainsaw chain has no fixed limit and depends on usage and maintenance. The chain should last many years; 5-6 years should be no problem. However, if the chainsaw chain is used properly and taken care of, it can last way longer.
What happens when the chain on a chainsaw breaks?
Ed to answer your question same scenario, chain breaks the drive sprocket instantly disengages from the drive links. Chain stops. No whipping or flailing. Kick backs by far are the greatest danger of chainsaw operation next to struck byes from trees or parts of a tree.
Do chainsaw chains wear out?
If your chainsaw chain becomes dull after a long lifespan, it will struggle to cut through the wood at the efficiency it once had. This is why, where possible, you should be looking to keep the will be chain sharp, as sharpening a better course of action than sourcing a replacement.
Is it worth sharpening a chainsaw chain?
Sharpening your chainsaw chain is definitely worth it as a sharp chainsaw chain is easier to work with. It takes less effort to cut through wood and your chain will make cleaner cuts with sharp blades. A chainsaw chain can be sharpened multiple times without much of a cost.
Why does my chainsaw chain get dull so fast?
Dirt Causes A Chainsaw To Dull If you’re cutting through logs and your angle of approach is too steep, a simple cut through could nick dirt or even worse, rocks on the floor causing your chainsaw to jerk, thus dulling.
Can a broken chainsaw chain be fixed?
If you have decided to repair the chain, at this point you can do so. You can sharpen the chain with a chain sharpener, remove additional chains using the rivet punch or screwdriver if the chain has stretched, adjust the links in the chain, or replace damaged links in the chainsaw chain.
Do you start a chainsaw with the brake on?
When using a chainsaw, you should always start it with the chain brake engaged so the chain does not move.
What causes chainsaw kickback?
There are two circumstances that can cause kickback when using a chain saw. The first occurs when the moving chain at the tip or the nose of the guide bar strikes an object. The second situation is when the wood closes in, pinching the saw chain in the middle of the cut.
How much does it cost to sharpen chainsaw chain?
A typical chainsaw can be sharpened up to 10 times before it’s time for a replacement. The cost to have a chainsaw sharpened ranges from $13 to $16. The average cost per chainsaw sharpening is $14.50 for people who choose to have their chainsaws professionally sharpened.
How many times can a chainsaw chain be sharpened?
Cutters can be sharpened up to 10 times or more before the chain needs replacing. If your cutters are worn unevenly after a few sharpenings, a professional can regrind them to uniform shape. If you use the same chain for a few years, then buy a new one, the new one won’t mesh smoothly with the sprocket and bar.
Do all chains fit all chainsaws?
Not every bar or chain is right for every saw. For example, larger chainsaw bars work best with more powerful saws because it takes more energy to drive a chain around a long bar. That’s why electric saws use bars 18″ and shorter. Similarly, chainsaw chains are measured to fit certain bars.
Can dirt dull a chainsaw blade?
Nobody plans to run their chain saw into dirt. But when you cut close to the ground, you’re just begging for a quick dip into dirt, rocks and crud. All it takes is a second in the dirt to dull the cutters. In addition to dulling the cutters, dirt also wears out the chain links faster, causing the chain to stretch.
How often should you flip the bar on your chainsaw?
Some professional loggers would advocate that you should flip your chainsaw bar at the end of every use, particularly when you are cleaning up. Others suggest a more relaxed approach advising that you flip the chainsaw bar only when you are changing your chainsaw blade.
Is it OK to cut wet wood with a chainsaw?
Can you cut wet wood with a chainsaw? Yes, you can cut the wet wood with a chainsaw. Besides, there is a misconception that wet wood can impact the chainsaw bar and chain. But actually, the damp wood will not dull the chainsaw any faster than using it on other types of wood.
Why does my chainsaw bar smoke?
This most commonly is a result of a dull chain and exerting to much pressure on the bar and chain trying to make the chain saw cut. This could also be either a lack of bar and chain oil ( tank empty, restricted oiler hole ) or an inferior type of oil that is being slung off the chain and not lubricating.