This brought the provisions of the Abrasive Wheels Regulations 1970 under the amended general requirements of PUWER 98, covering angle grinder training. The purpose of this blog is to give advice on precautions for the prevention of accidents in the use of abrasive wheels, cut off saw and angle grinder health and safety, in particular the danger of injury resulting from either wheel breakage or contact with a running wheel. Every operator of an Abrasive wheel requires at minimum an Awareness training course however, as mentioned earlier, the HSE advises that there is no substitute for thorough practical training in all aspects of Angle Grinder, Cut off saw or Stihl saw training.
The angle grinder is one of the most dangerous tools in the workplace and so appropriate angle grinder safety and training on operating procedures are critical for the sake of workers and their families. In early 2016 after being struck in the chest by a broken 9-inch angle grinder attachment prompting WorkCover Queensland to issue a safety alert. Ensure the angle grinder is checked for damage or safety issues before use.
The theory part of the training course will now be delivered via an online webinar, all trainees will be required to watch this and complete a theory test prior to the practical training taking place. This abrasive wheel course is accredited by the BAF and is for operators of angle grinders and other hand held grinders. We offer specific abrasive wheel training for angle grinders and handheld grinders and this can be conducted on your site or premises anywhere in the UK..
On the very rare occasion there has been a requirement for an employee to use an angle grinder, so far I have stopped them from using it as they have had no training or experience whatsoever. Ask them if the angle grinder runs at 12,000rpm, what speed the disc should run at. As previous post pointed out Noise/ppe/HAV considerations as well as inspection of Grinder itselfSafe use and storage etc……………………. I thought the half day course was more aimed at grinding wheels as used on surface grinders and bench grinders.
do you need training to use an angle grinder Related Question:
Do you need to be trained to use an angle grinder?
“In relation to abrasive wheels, PUWER 98 requires, among other things, that all machinery is suitable for its intended use and is properly maintained, and that employees, including those using, mounting and managing the operation of abrasive wheels, are fully informed and properly trained in their safe use”.
What should be considered before using an angle grinder?
Before use Before using an angle grinder, ensure that: the guard and handles are secure. there are no defects or damage to the disc (a disc which has been dropped may have developed cracks and should not be used)
How common are angle grinder accidents?
Abstract. Angle grinders are amongst the most dangerous tools used in industry and agriculture. Over 5000 documented injuries are related to their use each year which are commonly triggered by a shattering of the abrasive wheel. These injuries are often accompanied by suboptimal health and safety standards.
What PPE should you wear when using a grinder?
Wear safety glasses or goggles, or a face shield (with safety glasses or goggles) to protect against flying particles. Gloves, aprons, metatarsal safety boots, and respiratory protection may be required, depending on the work.
What is abrasive wheel training?
Abrasive Wheels training is a classroom-based course that ensures that you are competent and safe when using and inspecting different abrasive-wheel types.
What is an angle grinder good for?
An angle grinder is a power tool that can be used for different projects. You can cut metal, aluminium, concrete, bricks, pavers, wood, and other dense materials; you can sand and polish different surfaces to sharpen tools and grind materials. Angle grinders can be used with different types of discs for different jobs.
Can you use a cut off wheel on an angle grinder?
Usages. You can use cut-off discs for cutting metal bars, metal tubes and small pieces of metal sheets and plates. You can also cut out welds with them. For shortening the length of various bolts, it is also a good idea to use an angle grinder and a cut-off wheel.
What can you not do with an angle grinder?
Angle Grinder Use Angle grinders generate sparks. When required obtain a hot work permit before use. Keep work area clear of debris and flammable materials. Do NOT use in areas where there is grain dust or other combustible dust accumulation.
Do angle grinder sparks hurt?
Conclusion. In summation, the sparks that result from cutting or grinding metal can be dangerous. Not only can they burn the eyes and skin, but they also can also ignite flammable materials such as wood, paper, or fabric causing a fire.
Can you use a grinder without a handle?
grinder. Don’t use the grinder without a side handle. Use both hands. Neveroperate a grinder in a one-handed manner; should the wheel jam, it would be almost impossible to maintain control of the grinder, even if it were equipped with a slip clutch.
What is the most common angle grinder injuries?
The most common sites injured are the head and face. The high speed disc of angle grinders does not respect anatomical boundaries or structures and thus the injuries produced can be disfiguring, permanently disabling or even fatal.
What causes grinder kickback?
Kickbacks. Kickback happens when the angle grinder suddenly thrusts back towards the operator as a result of it grabbing or jamming on the materials being worked on. They are common and kick back injuries have included severe cuts and injuries to hands, arms, legs, and the groin region, as well as facial injuries.
Should you wear gloves with angle grinder?
“Gloves should be well-fitted and provide good dexterity and the best possible protection against cut or abrasion and heat,” he said, adding that vibration resistant properties are also of benefit, specially on angle grinders that don’t have Milwaukee’s built in anti-vibration features.
Do you need abrasive wheel training to use a grinder?
Abrasive Wheels training is a legal requirement for anyone operating this equipment in the workplace. Abrasive Wheels are extremely dangerous and the only way to reduce risk is through theoretical and practical training in operating the machinery.
How often do you need abrasive wheel training?
Many registration bodies such as CHAS, SafeContractor, ConstructionLine, SMAS and other members of the SSiP scheme all recommend that re-training is done every 3 years on all courses.
