To run properly, all chainsaws need two types of oil for different jobs. The first is engine oil. The chainsaw shown here has a two-stroke engine, so it needs two-stroke engine oil mixed with the fuel to help cool and lubricate the moving parts inside the motor.
At Gardening Products Review, we highly recommend oil manufactured for this specific use. Chainsaw shown in this video tutorial is the Redback 40V 12″ Li-Ion Cordless Chainsaw. The bar & chain oil featured in this video is Husqvarna Bar & Chain Oil – 1 Gallon.
This is different than the oil that you mix with your gas to provide lubrication to the engine, and I’m going to describe below the importance of this task and explain how to oil your chainsaw for both the safety and care of your saw. Most saws come with a sample bottle of oil and suggestions of which oil to by- but for the most part, the oil is that same from one brand to the next. Saws are designed to feed oil as it runs, so most tanks are large enough to hold enough oil for a full tank of gas.
Electric chainsaws don’t require added oil, but there is a way you will use oil with your electric chainsaw. Electric chainsaws have specific bar and chain lubrication oil that is to be used on them. Although electric chainsaws do not use gasoline and oil as a gasoline-powered chainsaw would, you will need to lubricate the bar and chain as you would any chainsaw.
do you oil chainsaw Related Question:
Do I need to oil my chainsaw chain?
You want lubrication of the actual chain against the bar. You don’t want to chain to burn – which is what might happen if there’s too much friction. Without oil, it causes frictional force on the motor in the chainsaw as well.
When should I oil my chainsaw?
So, whenever you refuel your gas chainsaw, you should add bar and chain oil as well, every time. The steps are quick and easy: Set your chainsaw on a level surface, bar side down so that it lays flat. Allow a minute for the oil to settle, then unscrew the cap to the saw’s bar and chain oil reservoir.
Is chainsaw oil the same as motor oil?
Bar and chain oil is stickier than regular motor oil, so it stays on the chain longer. Motor oil flings off the chain more quickly, so if you try Terry’s tip, be prepared to refill the oil on your chain saw more quickly than with regular bar and chain oil.
Do electric chainsaws need bar oil?
Electric chain saws derive their power from an electric source, so they don’t need fuel to run. Most gas chain saws require a premixed gas-and-oil fuel to operate properly. Electric chain saws don’t require this added oil, but the bar and chain do need to be properly lubricated.
What is special about chainsaw oil?
Chainsaw bar oil has a certain level of “slickness” to it. This slickness keeps the chain spinning at a fast rate without getting slowed down by the friction that occurs when metal rubs against metal. So, if you want to use the “correct” type of bar oil in your chainsaw, consult the manual and use what it suggests.
Can you use regular oil for chainsaw bar?
Whether you use bar and chain oil, traditional motor oil or a vegetable oil-based lubricant, always make sure you’re using fresh oil when you fill your chain saw’s bar oil reservoir. Never use waste oil that you drained from your car or boat.
Can I use 10w30 for chainsaw bar oil?
As a matter of fact, you can actually use regular 10w30 motor oil on a chainsaw as one of the alternatives in case you don’t have bar and chain oil. That’s because 10w30 oil has enough thickness and viscosity that will allow it to withstand the friction that is happening whenever you are using a chainsaw.
Can I use any oil for chainsaw bar?
Generally, chainsaws can handle a wide range of lubricants. Vegetable and canola oils work well, and automobile motor oil will too, as long as you observe the SAE ratings and use the appropriate oil weight for the season. Always use fresh, never used, oils.
Can I use 2 stroke oil for chainsaw?
Is 2 stroke oil the same as chainsaw oil? Yes, 2-stroke oil is the same as chainsaw oil. However, a chainsaw engine could also be designed for a 4-stroke oil.
How much bar and chain oil do I put in my chainsaw?
When to Oil Gas chainsaws use about one tank of bar and chain oil for every tank of fuel, so fill the reservoir every time you fill the tank.
Can you use 10w40 in a chainsaw?
You can but it’s not very good for the chain or the environment. The Husqvarna / Stihl stuff is much thicker and vegetable based so it doesn’t fling off the chain as easily or poison your garden! 10w30. Thicker.