Cutting firewood just for personal use, I go through so little oil and gas that cost is not really a factor. I would not cheap out on the mix since the life of the saw depends on it. Bars and chains will wear regardless so there is no point spending hundreds for premium B&C oil to save tens in bars and chains.
2) Husky oil, a little cheeper then Stihl oil, but a good run, seems a little warmer running bar, and seem to drip off just a little ‘blacker’ then the stihl oil. Husky oil dode not seem as consistant as Stihl oil to me, but a good run. 3) Power Blend oil, a lot cheeper then Stihl oil, but a noticably warmer running bar, you just get the feeling that it is not as good.
Chainsaw bar oil is a necessary component to operating your chainsaw at peak efficiency and with safety in mind. Formula Chainsaw bar oils are either petroleum-based or bio-based. ‘ Chainsaw bar oil for winter is usually 10W. Very hot temperatures may call for a thicker chainsaw oil, in the 40W to 50W range.
Husqvarna Premium Bar and Chain Oil is another ultra-popular premium bar and chain oil. STP Tools Bar and Chain Oil is another ‘premium’ chain bar oil that has thousands of reviews. Mag 1 Bar and Chain Oil is another cheap bar and chain oil that comes by the gallon and will not have any trouble getting the job done.
The reason I buy Stihl oil is I was told some other bar oil is recycled and may contain metal particles. I am sure there is a diffrence as I know true bar and chain oil is “Stringy.” That being said, I have always used hydraulic oil, used at that, since most of it came from the hydraulic oil changed out of the skidders. “Well this debate has been going on for some time,internet forum wide.I use TSC oil,works ok for me.The stickiness of the bar oil is due to a tacking agent ,which causes the oil to cling to the metal parts,like bar and chain. I’ve heard good reports from people using vegatable oil but I’ve never tried it myself. I run all my saws with the oilers set wide open and will say that Stihl oilers are mighty stingy on the amount they put out.On the contrary my big McCullochs will oil any bar I put on them including my big old 48” and just blow oil off the end.
does chainsaw bar oil brand matter Related Question:
Are all chainsaw bar oils the same?
What viscosity is chainsaw bar oil? The viscosity of chainsaw bar oil can vary depending on the formula but 30W is standard. In cold weather, a thin 10W chainsaw oil may be advantageous, while very hot temperatures may require a much thicker 40W or 50W formula.
Does chainsaw bar oil matter?
Petroleum-based bar oil has been the standard for chainsaws. Lightweight oil is used in winter and heavier oil in summer. Manufacturers of chainsaws make bar and chain oils specially blended for their machines to extend their lifespan, but if they are not available, the owner’s manual suggests alternatives.
Can I use any chainsaw bar oil?
If your manufacturer’s bar and chain oil is unavailable, you can use SAE 30 weight motor oil to lube your chain during the summer and SAE 10 weight during the winter, according to the University of Missouri Extension.
Do I have to use Stihl bar and chain oil?
So, whenever you refuel your gas chainsaw, you should add bar and chain oil as well, every time.
Can I use 10w30 for chainsaw bar oil?
As a matter of fact, you can actually use regular 10w30 motor oil on a chainsaw as one of the alternatives in case you don’t have bar and chain oil. That’s because 10w30 oil has enough thickness and viscosity that will allow it to withstand the friction that is happening whenever you are using a chainsaw.
Are there different types of bar oil?
Bar-and-chain oil comes in two types: summer and winter. Egelhoff explains that summer and winter oils have different viscosity. Winter oil is thinner, allowing it to run smoothly even in cold temperatures and when stored for awhile. Summer oil is thicker, heavier and formulated to work in hot conditions.
Can you use 10w40 in a chainsaw?
You can but it’s not very good for the chain or the environment. The Husqvarna / Stihl stuff is much thicker and vegetable based so it doesn’t fling off the chain as easily or poison your garden! 10w30. Thicker.
What kind of oil is bar and chain oil?
Rapeseed-based (usually called canola) oil is currently the most common environmentally compatible chain-and-bar lubricant. Vegetable-based oils are triglycerides or natural esters that come from agricultural crops.
What does 10W30 mean?
The 10W30 designation on engine oil means that the viscosity of the oil is rated at 10W when an engine is cold, and 30 when the engine is hot. This is different than an oil labelled 5W30, which has a thinner viscosity when the engine is cold at 5W.
Can I use 5w30 for chainsaw bar?
Can I Use 5w30 for a Chainsaw Bar? Like 10w30 motor oil, you can use 5w30 oil. However, the thin and low-viscosity SAE5 weight oil will not cling to the chain and chainsaw bar very well in the summer. You may experience a lot of oil loss and a messy worksite if you choose this chainsaw bar oil alternative.
What is bar oil equivalent to?
Canola oil is another good substitute when you don’t have access to vegetable oil. It’s able to handle high heat and protect your chainsaw bar and chain from damaging friction. That is only if you keep it well lubricated while cutting. Canola oil is also better at handling lower outdoor temperatures than vegetable oil.
What type of oil is Stihl bar oil?
Good for the environment. STIHL BioPlus chain lubricant has one of the best oxidation stabilities of all rapeseed oil-based chain lubricants.
Is bar and chain lubricant the same as oil?
Bar and chain oil is stickier than regular motor oil, so it stays on the chain longer. Motor oil flings off the chain more quickly, so if you try Terry’s tip, be prepared to refill the oil on your chain saw more quickly than with regular bar and chain oil.
Can I use 2 stroke oil for chainsaw?
No, you can’t use any 2-stroke oil in your chainsaw. Some 2-stroke oils are built for motor oils, and this might damage your chainsaw. Also, 2-stroke oils for an air-cooled engine are different from a water-cooled engine.
Does bar and chain oil expire?
Bar oil itself lasts indefinitely; it’s the containers holding the oil that determines the shelf life. Bar oil will stay in most bottles between 3 and 7 years. The oil base determines the length of time; synthetic oils will last the longest, whereas mineral and plant-based oils have a shorter shelf life.