The pitch measurement of a saw chain tells a pro user about to the overall size of the saw chain. Saw Setup: The pitch of the chain, the pitch of the drive sprocket, and the pitch of the bar tip must all match. The gauge measurement of a saw chain tells a pro user about the strength of a chain’s drive links.
MS 200TMS 361.044.440 Mag.460 Mag.056 MII660 Mag.50 3/8. “I would buy the Husky 372 with a 20″ bar with full comp 72V chain and a 32″ bar with 30RCS. The 30RCS I would skip if most of your trees are small diameter and just go with 72V on the 32” too. The different chain gauges came about due to marketing by the chain and bar manufacturers in the 60’s and 70’s. Each coming up with different gauges to try and “Persuade” the market to use only their brand of bar and chain. You can get a little more use out of a bar by going from a.050″ gauge chain to.058″ gauge chain or from.058″ to.063″ gauge as the inside of the bar rails wear.
The bike has a sprocket with teeth that fit into holes in the chain as it goes around…. a saw chain is just the opposite, it has teeth on the chain that fit into holes on the sprocket to drive the chain around the bar. If the gauge of the chain is thicker than the gauge of the bar groove the chain will be to tight and not fit into the bar groove at all… not really a mistake you can make you’ll know right away it’s wrong. If the chain gauge is thinner than the gauge of the bar groove the chain will be loose in the groove and let the chain rock from side to side causing the saw to “Wander” in the cut and cut poorly, or not at all.
Matching the right chain to a chainsaw is easy if you have the right measurements matching the right chain to a chainsaw is a little more complicated than finding other power tool accessories, because of the unique way that chainsaw chains are measured. After matching the right size of chain there is still a host of chainsaw chain types and features to choose from and match to the application, but that’s usually much more straight-forward than finding measurements. Page is also a great way to get more familiar with chain sizes and types, even if there’s still some time before your next chainsaw chain replacement.
does chainsaw gauge matter Related Question:
Can I use a different gauge chain on my chainsaw?
Drive sprockets can drive any gauge chain, only the pitch matters.
How do I choose a chainsaw gauge?
To find the called length of your chainsaw bar, measure it from its front tip all the way back to the cutter closest to the body of the saw. Round this measurement up to the nearest even number in inches. For example, a bar that measures 18 3/4″ will actually have a called length of 20″.
Can a .063 bar run .050 chain?
Sprockets are no different there, but don’t run an . 063 chain in an . 050 bar and vice versa.
What is the difference between .325 and 3/8 chain?
The . 325 may be smaller and faster, but it may not be your best bet for your everyday needs. The three-eighths-inch chain is durable and lasts longer than its smaller cousin. This makes it one of the more popular switches for chainsaw users who want to get more out of their saw.
Are all chainsaw depth gauges the same?
A: When depth gauges are uneven, each cutter tooth on the chain takes a different sized bite. This causes the chain to cut rough and vibrate. If the depth gauges are higher on one side than the other, this causes the chain to cut crooked. The cut will pull in the direction of the side that has the lower depth gauges.
Can I put a bigger bar on my chainsaw?
Stihl’s electric saws come in three different sizes: the MSE 140 can handle a bar between 12 and 16 inches, the MSE 180 can take a bigger 18-inch bar, and the MSE 220 takes a bar between 16 and 20 inches. The little battery-powered MSA 160 is equipped with a 12-inch bar.
What is .063 gauge chainsaw chain?
063″ gauge chain for experienced loggers and tree care workers who use . 325″ pitch saws. This saw chain features low-vibration, full chisel cutters that cut through timber quickly and precisely. The depth gauges are designed to provide maximum chain performance and a smooth cutting experience on higher output, .
Are .325 and 3/8 chains interchangeable?
You can replace a 3/8 Oregon PowerMatch nose with a . 325 PowerMatch nose on any length of Oregon PowerMatch bar you want. Then when you use up the . 325 chain just put the 3/8 nose and rim sprocket back on.
Are all 3 8 chainsaw chains the same?
Most saws use 0.325″, 3/8″, or 0.404″ pitch, with 1/4″ less common. Most consumer saws use a type of 3/8″ chain called “low profile”.
Does pitch matter on a chainsaw chain?
Yes, pitch does matter. If you change to . 325 chain you will also need to change the drive sprocket. If the saw has a floating rim then just change that, otherwise it is a new drum which may not be available.
What chainsaw chain cuts the fastest?
A full chisel chain is a chain with square cornered teeth, and they’re known for being the fastest cutting blade shape available. A full chisel chain also has a higher number of teeth than other chain options(full chisel is also known as a standard chisel chain).
Does the number of drive links matter?
For heavier jobs like felling trees or bucking logs, it might be better to have a longer chain with more links – but this will make it slower and less agile. Shorter chains can cut branches under two inches much faster than long ones because the short length of the blade doesn’t get caught up in them as much.
What is the difference between a R56 and a S56 chainsaw chain?
The difference is the width of the chain track. S56 is . 050″ and R56 is . 043″.
What happens if you file rakers too low?
If you take your rakers down too low, on the other hand, your chain gets very aggressive and either stalls out in the cut or (worst case scenario), hangs up in the cut and kicks back at you.
Why does my chainsaw chain dull so quickly?
Dirt Causes A Chainsaw To Dull If you’re cutting through logs and your angle of approach is too steep, a simple cut through could nick dirt or even worse, rocks on the floor causing your chainsaw to jerk, thus dulling.