Of course some guys just want to be stubborn and not buy a different oil, particularly as the discount places generally only carry the summer oil. Used AW 32 hydraulic oil makes decent Winter bar oil I use that quite abit. IME, if the oil tank is below the muffler I don’t worry about using winter oil.
does chainsaw oil freeze Related Question:
Does chainsaw oil go off?
Bar oil itself lasts indefinitely; it’s the containers holding the oil that determines the shelf life. Bar oil will stay in most bottles between 3 and 7 years. The oil base determines the length of time; synthetic oils will last the longest, whereas mineral and plant-based oils have a shorter shelf life.
Can I use winter chainsaw oil in the summer?
The winter oil is designed to pour and pump better when it is cold. It’s not going to lose its lubricating properties in the summer. It may pump a bit faster, but that would be it. If you are concerned about it, just check your oil level a couple times as you burn that first tank of gas.
Can you use a chainsaw in freezing weather?
With the onset of winter, thoughts shift to some of the challenges of winter chainsaw operation. With a little extra care, your chainsaw can offer peak performance even in the face of extreme cold temperatures.
At what temperature should I use winter bar and chain oil?
Husqvarna’s Premium bar and chain oil or Husqvarna’s Pro Forest Environmentally Friendly ( bio-degradable ) bar and chain oil is recommended for ambient temperatures of 32°F ( 0°C ) and above.
Can I use 10w30 for chainsaw bar oil?
As a matter of fact, you can actually use regular 10w30 motor oil on a chainsaw as one of the alternatives in case you don’t have bar and chain oil. That’s because 10w30 oil has enough thickness and viscosity that will allow it to withstand the friction that is happening whenever you are using a chainsaw.
What is special about chainsaw oil?
Chainsaw bar oil has a certain level of “slickness” to it. This slickness keeps the chain spinning at a fast rate without getting slowed down by the friction that occurs when metal rubs against metal. So, if you want to use the “correct” type of bar oil in your chainsaw, consult the manual and use what it suggests.
What weight is winter bar oil?
It is supposed to be a multi wt. oil. I’d say it’s probably close to 20wt.
What is winter weight bar and chain oil?
Formulated to provide optimal lubrication in cold weather. Specially formulated to adhere to your chainsaw’s bar and chain, this oil provides optimal lubrication and helps prevent sap and pitch from clinging which can help prolong the performance and lifespan of your chain parts.
How do I thin my chainsaw oil?
You may be able to thin your bar and chain oil with a little kerosene or diesel fuel. The mix should be about 5 to 10 percent diesel or kerosene and the remainder bar oil.
Does frozen wood dull a chainsaw?
Just plain old wet frozen wood won’t dull a chain . It will however make even the largest saw cut like the chain is on backwards .
Should I let my chainsaw warm up?
The gas engine in a gas chainsaw should warm up, but due to the engine’s small size, this will happen quickly. Normally the engine will run for a short time after startup before you really start using it, giving the oil enough time to warm up and lubricate all engine parts.
Is it bad to use chainsaw in snow?
Just as sawdust and oil can accumulate around the sprocket on a warmer day, ice and snow can build up around the sprocket during winter. The addition of icy wet accumulation with the oil and sawdust can cause a serious problem for your chainsaw. While you’re at it, keep a close watch on the chain brake.
What weight is bar chain oil?
Once temperatures rise, switch back to your standard bar and chain oil, which may be anywhere between 20 and 50 weight (30 weight is standard). Using winter oil during summer might leave a lot more oil on the ground because the thinner oil won’t adhere as well to the bar and chain.
Can you put 5w30 in chainsaw?
Can I Use 5w30 for a Chainsaw Bar? Like 10w30 motor oil, you can use 5w30 oil. However, the thin and low-viscosity SAE5 weight oil will not cling to the chain and chainsaw bar very well in the summer. You may experience a lot of oil loss and a messy worksite if you choose this chainsaw bar oil alternative.
Is chainsaw oil the same as motor oil?
Bar and chain oil is stickier than regular motor oil, so it stays on the chain longer. Motor oil flings off the chain more quickly, so if you try Terry’s tip, be prepared to refill the oil on your chain saw more quickly than with regular bar and chain oil.