In order to make a biscuit joint, it’s imperative that your biscuit jointer is set to the correct size of biscuit you’ll be inserting into the slot. Equally, setting up the biscuit jointer to the correct height for the cut is important. A good quality biscuit jointer will provide you with a clear line of sight for your cut, per the Makita PJ7000.
A biscuit joint can be helpful to align long edge to edge joints, as well as strengthen weaker joints that use glue such as butt and miter joints. In general, you should be able to use a biscuit joiner on an edge-to-edge joint, a T joint, an edge miter joint, a corner joint, an offset joint, and a frame joint. Making a biscuit joint requires using a biscuit joiner tool.
When adjusted properly, the biscuit joiner will cut a slot 1/32″ deeper than half the width of your biscuit. As you begin to setup for your cut, start by carefully positioning the biscuit joiner to align with your biscuit placement mark. Once you get solid placement of the biscuit joiner and fence, find the detent on your biscuit joiner’s fence, place your thumb firmly on the detent, and let go of the handle to allow the biscuit joiner to “Bottom out” on the work piece.
Years ago, back in the 1990s and early 2000s, a biscuit joiner became a very popular woodworking tool. Well, as much as I admire Norm Abram, a biscuit joiner may be one of the most useless power tools you can own. If you’re new to woodworking, or if you’re a maker, you may not even know what a biscuit joiner is.
A biscuit joiner or biscuit jointer is a woodworking tool used to join two pieces of wood together. In the succeeding years there followed further developments such as the circular saw and the first stationary biscuit joining machine in 1956 followed by the first portable biscuit joiner for Lamello grooves in 1968. D Furniture hinge Depth of groove: 13 mm Use only on biscuit joiner with six-depth setting S Slide-in connector Depth of groove : 14.7 mm Use only on biscuit joiner with six-depth setting S6 85 30 4 mm‡.
what can a biscuit joint be used for Related Question:
What is biscuit joint commonly used for?
Biscuits are predominantly used in joining sheet goods such as plywood, particle board and medium-density fibreboard. They are sometimes used with solid wood, replacing mortise and tenon joints, as biscuit joints are easier to make and almost as strong.
Can a biscuit be used to reinforce a wood joint?
Biscuits can be used to join the ends of boards to edge or face grain. They will definitely provide more strength than glue alone, but not a lot. If your boards are too narrow, you can reinforce the joint by adding the biscuit on the back side of the face.